Sökresultat:
12246 Uppsatser om Mechanical data collection - Sida 66 av 817
Granskning av hållbarhetsredovisning : Revisorernas granskningsprocess vid de fyra största revisionsbyråerna i Sverige
As the media attention society on the world climate change, interest in the environment and social impact has increased. This has in turn made even more companies choose to maintain a sustainability report that contains the three aspects of economic, environment and social impact. The demand for sustainability reports has increased among stakeholders. It has made the companies that establish this form of reports experienced economic benefits. The sustainability report than became a useful way to compete among businesses.
Sveriges handelsvägar för tomat och äpple :
The market of fruit and vegetables develops continuously to become tougher and more complex.
The fast development makes it difficult to keep up with all the changes. This is the case for
apples and tomatoes. The purpose of this work is to explain what the trade routes are like for
Swedish imports as well as the Swedish production of tomatoes and apples, both in the present
and the past times. There is also an ambition to create comprehension of the trade routes.
Informationsmäklarens roll i gränsöverskridande aktiviteter - En studie kring mervärdet av informationsmäklare
En teknik som på senare år fått allt större uppmärksamhet på grund av dess potentiella nytta är RFID-tekniken som bland annat utlovar kostnadsminskningar och ökad konkurrenskraft. RFID i en logistikkedja genererar stora mängder data som måste lagras, hanteras och användas i realtid. Detta tillsammans med antalet användare av denna data gör att informationsmäklare kan vara nödvändiga. En informationsmäklarens uppgift är att hantera avläsare, filtrera och aggregera den insamlade RFID-data och skicka den, förädlad, till användaren av den data. Då utbudet av forskning kring de mjuka aspekterna av informationsmäklare inom RFID är begränsad är det oklart vilken roll informationsmäklare har vid gränsöverskridande aktiviteter.
Gotland och Montenegro - att söka Bysans i den västerländska kulturen : en undersökning av Manastir Mora?asoch Mästerby kyrkas muralmålningar
In this essay the author has chosen to analyze the similarities and differences between some of the northern Europe?s late Mesolithic and Neolithic cultures. The research is of a processual standpoint and the information is mainly gathered from secondary sources as well as ethnological studies. The material collected has been analyzed in both a processual and a post-processual manner to most accurately study the foundations of the three primary theories describing the Pitted Ware Culture?s origin.
Papper eller platta?
E-books are not yet fully established on the Swedish book market. A frequently discussed theory is that this might be because of a loss in the reading experience. This thesis has the primary purpose to investigate whether the reading experience from E-books differs from the experience of reading a traditional book in paper. The book used for comparation is a poetry collection named Rakel delat med tio. I have designed the cover and the inlay of this book and as a part of the thesis the working progress is described.
Givarkonstruktion för beräkning av sådjup
This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.
Kokosfetts påverkan på blodfetterna ? En systematisk översiktsartikel
Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Coconut fat?s effect on blood lipids - A systematic overviewAuthor: Linnéa Hult and Sandra WestlingSupervisor: Fredrik BertzExaminer: Ingrid LarssonProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 2013-04-11Background: Coconut fat has recently been praised in the media. Amongst other things,coconut oil has been said to lower cholesterol (1, 2). This despite the fact that coconut oilcontains of 92 % saturated fat, which strong scientific evidence support raises the blood lipidsand thus increases the risk of cardiovascular disease (3).Objective: To examine the scientific evidence for how blood lipids in adults are affected byan intake of coconut fat compared to an intake of other kind of fats.Search strategy: PubMed and Scopus have been used in the literary search. Keywords usedwere "coconut fat", "coconut oil", "plasma lipids" and cholesterol [MeSH].Selection criteria: Human studies of RCT or cohort type, published since 1983.
Fruits of knowledge : a case study of marketing strategies for small-scale mango farmers in the Nyanza Province, Kenya
This report is focused on marketing opportunities for small-scale mango farmers in the Nyanza Province in Kenya. Kenya is a large horticultural producer in the world. Horticulture is an important income for a large share of the rural population in Kenya but profitability is low due to inefficiencies in marketing systems and poor infrastructure. The conditions for growing mango in the Nyanza Province are very beneficial and there are two harvesting seasons. Mango offers good income opportunities for small-scale farmers in the Nyanza Province.The aim of this study is to identify marketing conditions that will enable prospering business for small-scale mango farmers in the Nyanza Province, Kenya.
Industrialisering av konsumentprodukt : Från inkommande material till färdigvarulager
This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.
Svensk delnormering av Lundamaterialet för åldrarna 3:0?5:11 år och undersökning av materialets effektivitet
The purpose of this study was to collect Swedish normative datafor Lundamaterialet for children aged 3:0-4:5 years. Another aim was toexamine the effectiveness of the test; if it elicits adequate responses fordeciding if a child has acquired a specific language structure or not.Normative data was collected for 195 children with typical languagedevelopment. Participants were recruited from pre-schools in themunicipalities of Göteborg, Mölndal, Härryda and Skövde. This studypresents normative data for 79 children constituting the three youngest halfyeargroups. Results show that the children had acquired more than half ofthe investigated phonological and grammatical structures and that the olderchildren had acquired more structures than the younger ones.
Löneandelens förändring 1975-2010 : Teori och empiri
Sedan 1970-talet har större delen av världen upplevt en minskande löneandelen. Vi försöker förklara utvecklingen med en enklare modell bestående av två typer av arbetskraft. Vi visar att på kort sikt påverkar arbetskraftens sammansättning löneandelens utveckling vid arbetskrafts utbudschocker.Empirisk studie av paneldata ger inga statistiskt signifikanta resultat vilket skulle kunna orsakas av bristfällig data och att de länder för vilka data existerar är i hög grad homogena..
Separeringsmodul
In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.
Provmetod för olje- och partikelöverdrag från kompressor till tryckluftssystem
Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.
Områdessökning i geografiskt associerad data
This thesis considers the problems associated with searches in insufficiently geographically tagged data. The thesis was carried out at Booli Search Technologies AB, a company developing a search engine for the Swedish real estate market.The aim of the thesis is to identify some areas of possible improvements of the company?s existing technical platform, perform a benchmarking among similar services, suggest possible solutions and lastly, build a prototype from one of the suggested solutions.The thesis starts out with defining the problems that the search engine faces: some areas are not possible to perform searches on, the users are not presented with the full search result that they expect, some results are placed incorrectly on the map associated with the search results and results are also not described with enough geographical information. These problems are due to the fact that the data retrieved at the indexing stage in the company?s information retrieval process are insufficient and incomplete.As a result of a benchmarking process and after discussing the results, severalinteresting solutions were identified.
Personuppgifteshantering och identifiering inom myndighet, skola och förtag
The authors of this thesis have studied the handling of personal information in various kinds of organizations, because the perception is that the knowledge in this area is weak relative to the weight of the subject.The purpose of this paper has been partly to shed light on how knowledge of this area in the organizations that we have visited during the study but also to answer questions about handling, knowledge and security, and identification of individuals in different systems. What kind of problems the processing of these data creates and why these problems occur.In the beginning of our study we understood the importance of using the correct identifier and therefore chose also to examine what the various identifiers used by the organizations and why they chose these particular identifiers.In the qualitative analysis, Datainspektionen´s general rules and advice has been used as a basis together with the laws applicable to the organizations to get a good picture of how management of personal information is in these organizations.What we have found in this paper is that knowledge about how personal data is handled and what laws and rules are saying is very much dependent on how central the information is to these organization's activities. The police use so many different types of records for their organization to function well and they have very good knowledge of laws and regulations. In contrast, schools that do not handle as much of personal data themselves nor have the same knowledge among staff and do not have enough resources to cope with keeping the same knowledge base as the police. This is something that applies to all types of handling, depending on how important the information is for the organization, the better the security and knowledge in handling the data is..