Glass has sophisticated front properties and are used as facades in high buildings. During cold periods, these glass facades could cause thermal discomfort, due to cold downdraught. Cold downdraught can be countered by placing heaters under glass surfaces. Nowadays technology offers highly insulating windows, which is why there is an interest to investigate the indoor climate with only underfloor heating. The research in this area is limited, and few empirical methods are available.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

The City of Gothenburg has an urgent need to upgrade its public transport. The capacity of its light rail transit (LRT) has reached maximum capacity within the inner city limits years ago. The construction of an underground metro will be very expensive and time consuming due to the soft clay beneath the city. The apparent need of developing another type of mass rapid transit (MRT) is urgent. An elevated metro have turned out to be a success in Greater Vancouver, but is it possible for the system to operate well in Gothenburg with its narrow streets and current land use; will its route coexist with the current LRT or will the noise disturb people too much?.

Concrete floors have traditionally had no problems with annoying vibrations. However with the demand for larger spans the floors need to be made more slender with a higher degree of utilization and lower mass. Therefore new floors may have problems with vibration serviceability. This thesis studies the vibration characteristics of hollow core slabs. The analysis was made in the finite element program Ansys. The hollow core slab was subjected to a varying force simulating one person walking across the slab.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

Detecting small signals with a comparator demands that the total voltage offset is lower than the actual signal. The total offset includes the voltage offset in the comparator and the voltage offset that is created by the offset currents that flows thru the load at the comparators input. The goal with this comparator that has been developed has been that it will have a total voltage offset at maximum 500 uV. The comparator does not need to be extremely fast or does not need to operate in a big frequency area. To have all the flexibility that is needed a full custom technique is used.

This thesis discusses the possibilities to distribute digital video in a military vehicle. Today, an analogue system is used, which has a maximum capacity of eighteen video sources and the same number of monitors. The purpose of this thesis is to increase the systems capabilities regarding secure distribution and additional functions. Both software and hardware tests are made to investigate the features of the digital video standard MPEG-2. Both the coding delay and the image quality are of great interest.

Music production software has a strong tradition of two-dimensional graphical user interface (GUI), in which the time line is represented as a flat composition either horizontally (from left to right) or vertically (from top to bottom). In my degree work titled Sequi, I approach music composition from a different angle. Instead of a two-dimensional time line with only two possibly ways of progression (forward or backward) I constructed a three-dimensional GUI with the maximum of four different ways of progression from any given point in a composition. The height axis is used to describe time-intervals (the time between downbeats) and the wide and depth axes are used to describe progression from one sound to another..

There is a lot going on in the construction business right now. It feels like everywhere you turn there is a building sight. Furthermore the business is heading a generation change and the need of recruiting new construction engineers is huge. How is the business going to handle the transition that they are facing? The question has been in progress for at while and I wanted to find out what the current students feel about taking the step into the working life and replace the veterans.A research is made about student?s opinion about their education and future work life.

Infection with Parascaris equorum is common among young horses in Sweden as well as in the rest of the world. The parasite has a direct lifecycle and reproduces in the small intestine. The eggs are passed out with faeces and become infective after approximately two weeks. The horses get infected when they ingest eggs that are dispersed in the environment. The symptoms seen in horses usually include retarded growth and loss of weight.

This essay is about the Swedish folk and troubadour singer Fred Åkerström and particularly his interpretations of the Swedish national poet Carl Michael Bellman. With Åkerström being a socialist, he converted his beliefs into what he believed Bellman should stand for and not stand for, politically and historically and the picture he did not take kindly to is called "The bourgeoisie". And in his interpretations of Bellman Åkerström used his deep bass voice and singing with maximum potential that earned him the nickname "Carl Michael Decibelman" along with a trio he created called Trio CMB. But along with alcoholism and financial problems Åkerström died at an age of 48 years old and had probably much more to give the Swedish musical society..

The purpose of this essay is to investigate if the companies listed on Nasdaq/OMX Stockholm Large Cap use the earnings management phenomenon Big Bath Accounting to a greater extent when a change of management (CEO) is made.Management tends to use earnings management when there is a bonus plan linked to the result of the company. To gain maximum bonus the management will try to manipulate the result in a way that in a long term maximize their utility. Through the earnings management technique Big Bath the management is given the possibility to take one large cost as a one-time expend, even though the cost is supposed to run over several financial years. This, of course, within the legal framework. A big bath may occur when there is an impairment of goodwill, tangible and/or intangible assets or larger provisions for future expense, or both of them at the same time..

Counter-Strike has established itself as one of the most popular computer gaming phenomenon the last decade with a major online community and loyal fan base. Within the world of e-sports it has also become one of the most lucrative games to compete in. In order to keep up with the competition it has always been important to use the best hardware available for the task. This thesis is about these tools that gamers use to play - gaming gear - and how pro gamers train to increase their chances of winning. We investigate various factors that might be important in their choice of gaming gear when they play, and how they train to use these artifacts more efficiently to get maximum performance.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.