Syftet med rapporten är att utvärdera och jämföra två standarder, AATCC Test method 198-2011: Horizontal Wicking of Textiles och AATCC Test method 197-2011: Vertical Wicking of Textiles. Standarderna publicerades år 2011 av American Association of Textile Chemists and Colorists. Standarderna mäter wicking, det vill säga, med vilken hastighet som vätska transporteras genom textil, med en horisontell och en vertikal testmetod. Hastigheten anges i olika enheter beroende på standard, enheten för AATCC Test method 197-2011: Vertical Wicking of Textiles är mm/s och AATCC Test method 198-2011: Horizontal Wicking of Textiles anges i mm2/s. Skillnaden i enhet och mätmetod innebär att standarderna inte kan jämföras rakt av genom resultat och mätvärden mellan de båda standarderna.

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

In this essay I have looked more closely at different means of grinding wood prior to the mass production and total dominance of the sandpaper in recent times as there is virtually no information to be found about this. I have also done a few replicas of how early sandpapers might have looked and as a part of creating these replicas I have also tested diffrent types of early glues. The conclusion of it all is that all the alternative grinding materials tested workd virtually as well as modern sandpaper, with some reservations. And the replicas, although rough, worked mostly well despite being constructed with simplicity in mind. This indicates that an artisan could easily construct sandpapers if he so wished..

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Människors ohälsa på den svenska arbetsmarknaden är något som under senaste tid flitigt debatterats i media. Denna uppsats vill undersöka hur intresset för hälsa inom en kommunal förvaltning ser ut. Studien tar sig an problematiken utifrån två aspekter, dels utifrån ett synsätt som utgår från ett politiskt och arbetsledningshåll, vad styr att de väljer att arbeta med friskvård för sina anställda. Dels utifrån ett synsät som lägger fokus på arbetstagarna, varför väljer dessa människor att delta respektive avstå från förvaltningens friskvårdsaktiviteter. Syftet med denna kvalitativa uppsats är att undersöka vilka sociala faktorer som påverkar politiker och arbetsledningens handlande i arbetet med friskvård för de anställda, samt att även undersöka vilka sociala faktorer som gör att de anställda deltar respektive avstår från förvaltningens friskvårdssatsning.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

The main purpose of this essay is to investigate professional artists experience of the need and use of information in their creative work. I have collected the material through qualitative interviews with four professional artist working with different materials and techniques. One of the results of the study is that the artists first of all used information as a source of inspiration in their creative work. They gathered their information from various scources, for example; pictures, exhibitions, visual arts, books and novells, depending on what project they are working with. Other important information scources were colleges, especially for the technical information need.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

The purpose of this literature review is to visualize the contributing factors of insufficient hygiene routines and incorrect aseptic handling. The literature review contains ten scientific articles from England, USA, Italy and Sweden, and related literature. Factors causing the problem are presented as four themes, the most reoccurring in our material are lack of time, knowledge/education, equipment and attitudes/motivation..

Syftet med föreliggande studie var att undersöka sambandet mellan självkänsla, perfektionism, tävlingsängslan och självförtroende. Dessa fenomen samspelar och ger antingen positiva eller negativa utfall för atletens prestation och känslor inför tävling. Vidare var syftet att undersöka eventuella skillnader i ovan nämnda variabler mellan individuella idrottare och lagidrottare samt ta reda på om det finns några skillnader mellan könen. En enkätundersökning genomfördes med 101 deltagare från totalt sex olika sporter. Resultaten av PSPP-R visade att individuella idrottare hade högre fysiskt självvärde och global självkänsla än lagidrottarna.

Främsta anledningen till en tilläggsisolering är att det önskas bättre energihushållning i en byggnad. Detta kan göras med olika material och olika tekniker. Inom byggnadsvårdssammanhang förs det en diskussion om de fuktbuffrande materialen är bättre vid tilläggsisolering då de är hygroskopiska än de icke hygroskopiska som är mest frekvent använda i det konventionella byggandet. Denna rapport utvärderar om det finns några dokumenterade fakta som styrker att de hygroskopiska och ekologiska materialen fungerar bättre i byggnadsvårdssammanhang än de icke hygroskopiska. Olika isolermaterial från de två nämnda grupperna jämförs utifrån olika parametrar..

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

Idag väljer nästintill alla pappor att närvara vid sitt barns födsel. Vid förlossningen erbjuds han att klippa navelsträngen. Detta klippande är en symbolisk handling som har kommit att bli en ritual. Syftet med denna studie var att undersöka hur förstagångspappor ställer sig till att klippa sitt barns navelsträng vid födseln, samt dess tankar och upplevelser kring handlingen. En enkät med slutna och öppna frågor delades ut vid tre BB-avdelningar vid olika sjukhus i Västsverige.