The aim of this thesis is to define digital library, and to investigate a relation between the construction of a digital library and user needs. The main questions to be answered are: 1 What criteria was used when constructing a digital library, particularly concerning issues like purpose, function, design, supply, services, resources and future development of the digital library? 2 How do the digital library system designers and system builders criteria correspond with those of postgraduate researchers? And what factors affect the use? A digital library is an enterprise that gives access to information stored digitally and directly available on the net. The crucial is that the enterprise has a control over collection of information and responsibility to make it available to a defined group of users. In order to investigate the relation between the construction of the digital library and user needs, I have interviewed five key people involved with the work with the digital library and twenty postgraduate researchers from the Gothenburg University.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Background: Today?s market offers customers many more possibilities to choose than before. With that the customer?s requirements on the company have become higher, products of the best possible quality to the less possible price when the customer demands them,specially concerning seasonal products that become out of date when the seasontime has finished.In the recent years the Supply chain management technic has gott attention because of its succesfully way to integrate the companys business processes. Demand Management is an important part of that technic since demand management is dealing with managning thedemand, with the pourpose to find the balance between supply and demand.

Researchers and practitioners have recognized the need for ?transforming? every policy of the company into a competitive advantage tool. Thus, both the pricing approach and the supply chain practices of the firm have emerged as an important determinant of success. In this study, however, we are not only interested in these two aspects, but also in a third one-namely cultural conflicts as an obstacle and challenge. The interaction of the tree factors is extensively presented against the backdrop of Skanska and four of their closest Polish suppliers.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

Regulation of rivers by dams and reservoirs is a good example where anthropogenic impact could be considerable both in the local environment, but also has major implications upstream and downstream. This study was accomplished as a literature study of the river Nile, which is extremely important for water supply. The purpose of this study was to investigate the consequences of the construction of the Aswan High Dam, to obtain a consistent flow for water supply, irrigation and power generation in Egypt. Since Egypt has a very hot and dry climate large amounts of water in reservoir is lost to the Nubian aquifer system and by evaporation. The consequences from constructing the dam are considerable.

In article 1.2 c) EC regulation 852/2004 it says that the regulation is not applicable to producers who directly supply small quantities of primary products to the final consumer or to the local retailers who in their turn directly supply the final consumer. An almost identical regulation can be found in article 1.3 c) EC regulation 853/2004. The supply by a primary producer of small quantities of primary products, of animal origin or not, are consequently excepted from these two hygiene regulations. In article 1.3 EC regulation 852/2004 and article 1.4 EC regulation 853/2004 it says that the member states are to establish national rules in their national legislation as to the regulation of exception for small quantities. The aim of this study was to investigate the handling of small quantities of primary products distributed locally in Sweden but also the handling of these products in other countries.

Today's global market means that raw materials are sought and bought from all over the world. This creates an higher demand for a well-functioning supply chain. In our thesis we have studied a large paper mill in northen Sweden which experiences issues with flow of raw material. Our aim has hence been to examine which aspects affect the flow of raw materials to the mill, and how these can be adressed using an IT-system. The question we sought to answer was; What factors are important to consider and how do these affect the ability of an IT-system which will support the flow of raw material at the paper mill? We have found that the problems are strongly connected to the low amount of information sharing between the mill and the suppliers.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

The increasing oil prices during the last years have made it profitable to use cereal grains as a fuel. When compared with wood, cereals contain higher amounts of Cl, S and ash. The Cl and S content makes the gases from cereal combustion more corrosive than gases from wood combustion. The goal of this master thesis was to find out the variation of Cl, S and ash content for oat grain grown under different conditions. Oats was chosen because in Sweden it's considered as the cereal with the best fuel qualities.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Mekanotjänst i Söderhamn AB är en uppdragstillverkare som ingår i Mekanotjänst industrier. Företaget är specialiserat på produktion av mekaniska produkter främst ur tunnplåt. Det pågår en utveckling inom företaget som är styrd av efterfrågan. Utvecklingen innebär en ökad förädling genom monteringsarbete. Två nya Ericssonprodukter, POWER SUPPLY SUBRACK och SUBRACK AMM 6p ska börja tillverkas i höga volymer vid Mekanotjänst i Söderhamn AB.

I dagens samhälle är det viktigt för företag att ha en effektiv försörjningskedja. En kedja blir ineffektiv när den innehåller mycket osäkerhet som t.ex. brister i informationsflöden, vid lagerhantering, skapandet av prognoser eller produktion. IT stöd finns, vilka ger möjlighet att minska dessa osäkerhetsfaktorer. Automatik i form av mjukvaruagenter är ett sätt att bidra till minskad osäkerhet.

CSR, Corporate Social Responsibility, has become increasingly important in a globalised world where the responsibilities of companies and governments are somewhat blurry. The textile industry is an industry where long supply chains and raw material production in developing countries are factors adding to the complexity and difficulties of solving ethical issues. Cotton production faces many environmental, social and financial challenges in the value chain. Therefore this case study takes a closer look at five Nordic home textile companies, Ikea, Hemtex, S Group, Moko and Finlayson, and how these companies choose their cotton related CSR tools and communicate their work on this area. These companies are of various sizes and therefore the resources for CSR work are also different, as well as the perceived values for working with CSR.