AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

The aim of my master?s thesis has been to examine the situation of the price lists in the National Library of Sweden, in Uppsala University Library and in the Nordiska Museet Library. The starting point was that the institutes have been operating within different institutional practices. These operational differences between the institutes have affected the collecting, the organizing and the accessibility to the information of the price lists. My master?s thesis is based on Birger Hjørlands theories of domains and knowledge organization.

The aim of this master thesis is to gain greater knowledge of interpersonal communication. This study explores on one hand how interpersonal communication can be used as an important part of reference work in a Swedish electronic synchronous reference service, and on the other how interpersonal communication affects the relationship between user and librarian. By using communication theory and establishing a positive relational contact with the user in the electronic environment, the outcome of the reference encounter can be successful for both the librarian and the user. Furthermore, the importance of recognising relational barriers is of great relevance to the relational contact. The scope of this master thesis is to find what relational factors are used and can be used in the interaction between user and librarian.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

From January 1st 2011 the use of Eurocode will be mandatory for all constructionprojects. Eurocode is the common European set of struc-tural design codes which willreplace BKR (Boverkets Kon-struktionsregler). BKR is the Swedish set of structuraldesign codes that was used up until December 31 2010. For consulting firms this willcre-ate a need for them to invest in the standards and in education for thecoworkers. This will involve both time and costs for the company.The purpose and aim of this master thesis is the development of compute examplesand calculations aid by dimensioning with Euro-code.

Målet med projektet är att utveckla ett system där det skall gå att komma åt information från en intern databas på ett enkelt sätt med en mobil enhet. Eftersom varje enskild databas är unik så skall det gå att justera systemet enkelt genom ett administrationsgränssnitt så att det passar till varje databas. Informationen är oftast känslig och skall inte åtkommas av obehöriga användare, så den mobila enheten behöver autentiseras för att skydda informationen. Systemet kommer alltså bestå av ett par applikationer:1. Webbtjänst som skall kommunicera med databasen och skicka information till webb- och den tjocka klienten.2. Webbaserad klient, skall kunna visa data från databasen.3. Tjock klient, skall kunna visa samt uppdatera data från databasen.4. Administrationsgränssnitt som skall kunna konfigurera webbtjänsten. För autentisering av användaren används telefon ID:et och sköts automatiskt av den tjocka klienten.

The aim of this master thesis is to examine high school students? understandings and experiences of gender equality and to critically study the formulations and the basis of the project from Save the Children Sweden which are the basis for this master thesis. By using critical discourse analysis and gender theories the formulations and basis of the project and the interviews has been analyzed. The analysis of the project showed neglect for intersectional perspectives and taken for granted hidden opinions about masculinities and femininities. The interviews have been conducted with four high school students, and the students felt that they attend schools which are equal between genders.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

SJ is a government-owned passenger train operator in Sweden. SJ currently uses asystem called Ford for control and monitoring of maintenance. Technical andorganizational factors have given Ford the character of a monolithic system withoutflexibility and conditions to meet SJ's increased requirements.The main purpose of this master's thesis is to investigate how data quality can bedefined at SJ and to examine the data quality in Ford. This will give SJ an indication ofwhat their quality efforts should focus on in the future.The technical data quality parameters found are: accuracy, timeliness, completenessand consistency. The user centred data quality parameters are: accessibility,understandability and reliability.

The purpose of this Master Thesis is to investigate the quality of the library service at the City Library of Uddevalla. In particular this thesis will examine the quality of the library service to people who are disabled. This applies particularly to the service to people with reduced ability to move or to see, which also includes people with infirmities due to old age. We also have investigated how well the library itself is adapted to the disabled. In order to get more information about the library service to people who are disabled, we have studied literature on this subject and the Master Thesis contains a summary of those documents.

This master thesis includes a description of how a number of sensors are put together in a sensor platform. It also gives a description of how localization and mapping has been performed with data collected from the sensor platform. Localization is a prerequisite for most of the tasks that can be requested from an autonomous mobile robot. In many situations the GPS signal is not available and hence an additional localization system is required. One approach is to apply localization based on landmarks extracted from the robots surrounding.

Störnings indikation på lågspänningsnät. Detta examensarbete har kommit till som ett resultat av företaget Öresundskrafts arbete med att installera ny teknik för datatransmission över elnätet. Uppgiften var att indikera störningar mellan 5-95 kHz på 400 V nätet med hjälp av en applikation för förenklad insamling och loggning av mätvärden baserad på ett oscilloskop kopplat till en dator via GPIBprotokollet och programmet LabVIEW..

This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

Bullying is a significant workplace problem, a fact highlighted both by companies, government and social science. The purpose of this master thesis was to examine if workplace bullying is a result of group processes. This is a theory-based master thesis. A search of literature on bullying, mobbing and harassment was done in a database called ELIN, Electronic Library Information Navigator, connected to Lund University and 414 articles were singled out. The summary of the articles were studied and according to a list of criteria, I choose to study some of the articles in more depth.