Projektet bestod i att utveckla en anläggning för personsanering av biologiska-, kemiska- och nukleära stridsmedel, en så kallad NBCanläggning. Arbetet har initierats av Marinens Sjösäkerhetsskola i Karlskrona. Under arbetets gång har Fredy Olssons produktutvecklingsmodell tillämpats. Projektets tyngdpunkt har legat i att söka komponentalternativ för de önskade ändamålen och för att uppfylla kraven. Anläggningen är långt ifrån produktionsklar, men ett omfattande grundarbete har gjorts inför ytterligare bearbetning och komplettering med beräkningar samt vissa komponentval..

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Distrilux International AB, a company within the Electrolux-group, works among other things with storing of products from other companies in the Electrolux-group. This rapport contains a cost analysis of the two Distrilux warehouses in Motala and Mariestad. The company offers five services in these warehouses, in-loading of products from a local factory and from external factories, storing, out-loading of products to Sweden (domestic) and for export. Since there has been some hesitation of the accuracy of the price-model of today, a master's thesis has been advertised. The purpose of the thesis has been to investigate the agreement of the price-model of today and the apportionment of the costing in warehouses.The main problem is to determine which activities is to be considered important in the price-model.

Människans balanssinne är ett av våra viktigaste sinnen som dagligen sätts på stora prov då vi som tvåbenta individer ska upprätthålla kroppen i normal position vid rörelser och aktiviteter. Människans balans bygger på tre olika sensoriska system som arbetar i synergi för att upprätthålla kroppen i en bra position. Balance Master är ett mätinstrument för att mäta människans posturala kontroll. Syfte: Studiens syfte var att undersöka reliabiliteten i balanstesterna Unilateral stance och Limits of stability utförda på en Neurocom balance master över bestämd tid på friska individer. Material/metod: 11 friska försökspersoner mellan 23 och 29 år utförde balanstesterna Limits of stability och Unilateral stance vid fyra olika testtillfällen.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Over the period as a student at the Master's Program for Educational Leadership, I have learned thatsometimes the participants School?s management shows concern regarding the purpose of studyingat such a program. The curiosity of what that might devolve upon got me to immerse myself in theapproach to and attitude towards competence development within educational leadership.The essence of what I wanted to examine was how the students from the above mentioned Master'sProgram perceived the treatment they received from supervisors and colleagues and if it waspossible to explain the attitude that the participants in the study reported. I also wanted to examinewhat issues, related to competence development and leadership within the school system, highlightsthe treatment of participants in educational leadership.The results are based on questionnaires and interviews and are divided into four categories; thesupportive, the unaffected, the discouraged and finally a side category to explain how to handle thediscouraged?s lack of support.

In this Master thesis, microwave connections between circuit boards are constructed. The primary frequency band is the X-band (8-12 GHz). The purpose of the connections is to enable a more simple and cheaper way of mounting the circuit boards inside a container. The connections have been designed and evaluated, using different computer programs. A few prototypes have been built and measured.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

This master thesis is an early concept development project about using plastic films and sheets as materials for shaping openings for Tetra Pak packages. It is also a technical introduction highlighting the areas of importance for the development of plastic film and sheets openings. The master thesis has been carried out as a co-operation between Chalmers University of Technology, KTH Royal Institute of Technology and Tetra Pak AB.The master thesis study presents an introduction that gives an understanding of the technical complexities and design possibilities of using thin plastic films and sheets in liquid carton openings. The knowledge is then transferred into five design concepts which points out the areas of opportunity. The technical introduction is widespread and extensive covering current packing trends, the liquid carton package and openings, thermoplastic material properties, and thin film and sheet manufacturing and shaping.

To the world you may be one person, but to one person you may be the worldThese words sum up my account of social worker expertise. How does one become skillful?a master?in the profession? I answer this question by exploring how social worker proficiency can be developed and grow with the help and support of supervisors, clients and colleagues. Development through professional supervision and in the encounter with clients is an essential part of the work. I also discuss what it means to be new in the field (a novice) in relation to being experienced (a master).

The application of the LSS law and how the public organization (Municipality of Hudiksvall) later had to reform their organization to fit the new demands is the foundation to this master's thesis. An internal evaluation was performed due to this reorganisation process within the social care department (LSS unit). The aim was to investigate and evaluate if the reorganization resulted in a better working environment and if the work load (distribution of work) became more evenly divided between the different unit managing directors. The primary empirical information to this master's thesis is collected from that evaluation report. The main aim of this master?s thesis is to answer if the organisational choice between specialised or de-specialised working tasks has an effect (experienced and measured) on the level of stress among the unit managing directors.

Road design with focus to safety has been extensively developed in last decades in Nordic and some other EU countries with the main aim to achieve a decrease in a number of accidents and fatalities on the roads. These countries gained many valuable experiences, but they had to sacrifice great effort, expenses, and time to reach the present art-of-state. The purpose of the Master?s Thesis is to review some design approaches with focus to safety and discuss the general way that they may be applied. The Master?s Thesis studies safety in three levels: (i) general - design standards, national safety policies and road hierarchy; (ii) local authority and road administrator; and (iii) three specific safety countermeasures - junctions, pedestrian crossings and traffic calming.