Due to the increasing international operations for the Swedish Armed Forces these new types of opponents needs new tools to cope with these commitments. A couple of years ago the Swedish Armed Forces had no non-lethal weapons, but today the Swedish soldier has a number of tools to choose from.The purpose of this paper is for the reader to get a presentation of which non-lethal weapons are used today by the Swedish Armed Forces and a sample of what non-lethal weapons are out on the market today. My main question is which non-lethal weapons do the Swedish Armed Forces? miss in their non-lethal capabilities set.I have collected information from a wide selections of sources like reports from the Swedish Defence Research Agency, the Swedish Armed Forces? own regulations and the Internet. The information is then processed and divided into five chapters: The development of non-lethal weapons, description of technologies, non-lethal weapons in the Swedish Armed Forces, Non-lethal weapons on the market and Results.This paper is limited to handheld, portable and man to man non-lethal weapons, all non-lethal weapons in the Swedish Armed Forces or on the international market are not covered.My conclusion is that the Swedish Armed Forces should acquire three 40 mm projectiles, one 12-gauge projectile and one TASER®..

The main ambition of this degree project is to illustrate the fundamental problems of today?s electric tariff regulation and the usage of the analyzing tool; The Network Tariff Model. There is a further discussion of potential problems and clear improvements of the 2012 years proposed network tariff regulation. Interviews have been conducted with specific network companies and Energimarknadsinspektionen. The proposed regulation of 2012 is discussed from the government?s proposition.This paper clearly shows that the authority´s work has been conducted in a very unprofessional manner during the period of The Network Tariff Model.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Recently there have been a lot of talk a about the financial crisis and recession. This is understandable since the crisis, which initially was limited to the U.S. now has spread its concern globally in form of bankruptcies, less investment and lots of people have lost here jobs. The purpose of this thesis is to examine how the financial crisis have affected the construction industry relating to market and personnel, but also examine what measures the construction companies have taken. The examination was carried out by information received from the majority of construction-related websites which then was followed up with interviews in the various construction sectors.

This bachelors thesis was made forWallenius Water AB to develop a basisfor an Airpurifier prototype. Wallenius Water isone of the world's leading environmentaltechnology companies engaged inchemical-free water treatment based onUV-radiation. The thesis aim was toproduce a basis for a prototype that canbe used in three applications:Standalone, RAS systems and ventilationsystems. The work includes anintroductory description of the theorybehind AOP technology based on aliterature review on the subject. Asurvey of products currently on themarket and a product specification hasbeen used as the basis for thepreparation of a number of concepts inthis report.

The study proceeds from a phenomenom called co-creation. If value can be created, it is logic to asume that it also can be destroyed. This phenomenom has earlier not been applied to long-term relationships such as business to business. In a business relationship it is important to identify factors, that leads to co-destruction, to be able to prevent them from appering. The purpose of this study is to identify which factors leads towards co-destruction.The study have used theories from Echeverri & Skålén (2011) which has designed a model explaning the outcome of co-creation and co-destruction.

Stockholm is growing with almost two fully loaded SL-buses a day. One of the consequences that derive from this is the increase of public transport travelers who put the regionally governed public transport up to the test in terms of its capacity. The Transport administration in Stockholm County initiated 2015 a project with the purpose of simplifying the calculation of bus stop capacities. A hypothesis (set up by the Transport administration) based on that a model for calculation of bus stop capacities could be calibrated for Stockholm conditions is being researched in this bachelor?s essay.The study is implemented by self-collected traffic data from bus stops located in the Stockholm city center.

When driving hard and cornering on a circuit good control of a car?s roll is desired, so the car reaches steady state quickly but yet in a controlled fashion. This control is mainly given by the combination of the cars springs, shock absorbers and anti-roll bars.The aim of this report is to investigate, analyze and measure a Porsche Boxster?s turn in behaviour and roll dynamics as well as with the aid of simulation results give suggestions for improvement of the previous mentioned combination.Two different simulations were made, one based on a simpler model that was based on an evolved version of the bicycle model in Matlab and one was more advanced model in the simulation software rFactor. Measurements of the real car was made using a GPS-based measurement system.

I have made a research about two different methods for introducing small children to Nursery School/Kindergarten. I choose to do this as I have found very little about this in the literature we have studied during my education to become a pre-school teacher.This period in the life of very small children and their parents is a big change in their daily life. The more traditional way to start pre-school is to do it very gradually during two weeks, the two-week method. This means that the parents visit the pre-school together with their child for a very short time, about one hour the first day. After one week they leave their child with the staff for about an hour and at the end of that week they try to leave it full time (6-8 hours).

Modelling of pollutants is commonly used in research and at departments working with environmental issues. The need to use large amounts of data when modelling creates the opportunity for more generalised models with lower data demands. Aggregating functions into coarser elements is a sort of generalisation of actual features in nature.A development of a method and a modelling tool called ?KadmiumKalkylatorn? has been performed to model cadmium pollution in rivers in Skåne, Sweden. The water runoff has been multiplied with cadmium standard concentrations based on membership in landuse classes.

This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulencemodel used in simulation of turbulent flow called PRNS (Partially Resolved NumericalSimulation). This model has promising properties and may be of use in savingcomputational resources. The purpose of this thesis was to analyze this model andcompare it with industrially applied models such as k-omega SST and LES (Large EddySimulations).PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation)where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1are selected. This constant is then used in the calculations and determines thebehavior of the simulation. When RCP is set to zero the equation are the same as fora DNS simulation and when RCP is set to one the equations for k-omega SST issolved.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

The Swedish automotive industry has since way back been struggling with bankruptcy, abroad buy outs and staff cuts. Competition and pressure on prices are two factors that affect the automotive industry. Because of this, the companies are pressured to continuously developing their work in addition to be able to compete on the market. The aircraft industry has successfully managed to implement additive manufacturing (AM) and for motorsport has several components manufactured with AM been used. When AM is used as a manufacturing method, there are a number of advantagesthat follows.

Lean production is the name given to Toyota?s Production System (TPS) by the west. The continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.