I studien ställs frågan hur den historiska förordningen ?produktplakatet? från 1700-talet ska tolkas i ett modernt juridiskt perspektiv. Produktplakatet reglerar än idag ett förbud för utländska redare att bedriva sjöfart på svenska vatten. En sådan aktivitet kallas för cabotage, vilket är franska och betyder ?kustfart?.Produktplakatets lydelse och den praktiska tillämpningen av förordningen genom behörig myndighet skiljer sig åt på olika sätt.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

The field of veterinary nursing should be based upon research and proven experience. Few studies have been performed within the area of distal limb bandages. Therefore the aim of this study was to examine and describe how to place a distal fore limb bandage based on proven experience. Data material was collected through four interviews with professional veterinary nurses, and then analyzed using a qualitative content analysis. In the analysis data material was transcribed and then divided into meaningful units that responded to the aim. The meaningful units were then condensed.

The lack of housing in the Swedish metropolitan areas is today a well-known fact. This isespecially true for the region in and around Stockholm. Due to the large amount ofmunicipality-owned land within Stockholm municipality the area for many new housingprojects are acquired through land allocation. How much time this process of land allocationconsumes for a typical project is today not really known. Equally unknown is the exactoutcome of the process, i.e.

Techniques used in the building of a number of ships from the Mediterranean will be presented in this paper. The two techniques thnat will be discussed are shell-based technique and skeleton-basedtechnique. An attempt to clearify and delineate the transition between these two techniques will be made. The possible reasons for transition will then be described and discussed. The development ofthe techniques is going to be identified with help from four wrecks by analyzing their edge joineriesand this facts will be used as a basis for a chronological presentation.

Nowadays the majority of the thinnings made in Swedish forests are done by machines, harvesters and forwarders. The most common model in thinning with a harvester is strip-road operated thinning and stand-operated thinning with one intermediate passage between the strip-roads. This study is a time study with some quality follow ups on a strip-road operated thinning model, a stand-operated thinning model with one intermediate passage between the strip-roads and a stand-operated thinning model with two intermediate passages between the strip-roads. The machines in the study were a small harvester (Forestline MPM C90) and a medium sized forwarder (Timberjack 1110). The study was made in Litsnäset outside the city of Östersund in Sweden and was made during the autumn 2007. In a lodgepole pine stand six study units (0,6 ha) were thinned with the three different models, two study units per model.

The purpose of this essay is to investigate how well vision and strategies communicates from division level to underlying business unit levels with focus on the Balanced Scorecard Concept. The investigation was carried out within the ANS division and two of its underlying business units at the LFV Group (Swedish Airports and Air Navigation Services). ANS is responsible for the air navigation services in Sweden and the production of the services is carried out of the business units AER (En Route) and ATA (Tower and Approach). With Air Navigation Services means supervision and conducting air traffic mainly within national air space. The purpose of the services is to insure that air traffic could be carried out in a safe way.The Balanced Scorecard was introduced for the first time in the beginning of the 1990´s.

Introduction: A big part of the patients that recently has gone through operation at surgical units experiences pain in different scales after their operation. Untreated postoperative pain has been proved in different studies to increase to risk medical complications, longer rehabilitation, more days at the hospital and higher expenses for the hospital. One of the nurses? main tasks is to notice and relieve the pain of the patients. To engage the patients more in the medical process and make the nurses´ work more person-centered could make an impact on the postoperative pain and contribute to a better pain relief.

 Abstract: Facebook in the Public Sector - qualitative interviewstudy with The Swedish maritime Administration, the Swedish Meteorological and Hydrological Institute, the Swedish prison and Probation services and the municipality of Katrineholm about their precense on Facebook.In my bachelor?s thesis I have studied how three government authority and one municipality uses or don?t use Facebook in their communication towards the citizens. I have chosen to study four different cases, to see if there are any significant similarities or differences between how the different services are working with their communication. I have chosen to explore my cases through semi-structured qualitative interviews, where I met communications officers of every organisation face to face.I have found out that there is not one right way to communicate through Facebook, every organisations decisions must be based on their own mission, aims and objectives. And I have seen that both the transmitter and the receiver need to mature into the new acting of this new channel - Facebook..

GBD-Storage Systems is a company that provides the industries with products for efficient storage.The company produces pallet racks and accessories like cassettes and extending units. The companyhas also supplied tire racks for a number of tire companies. The company's CEO Gunnar Berglund hasfor some time had an idea to improve the working situation of the workers on tire firms by allowingthe wheels to be handled by a counterbalance truck. The current situation poses numerous heavy liftswhen the tires are handled and therefore is hurting the workers.This thesis has been aiming at helping the GBD-Storage Systems by developing a concept of howan accessory to counterbalanced trucks can be designed to cope with the wheels. This concept willthen be produced as prototype by the company.

This report describes the work of developing a specification of requirements for Waste Heat Recovery Units. The main part of the paper describes how the work with the specification of requirements has been performed. One specific question to be answered is:What are the customer?s demands in case of properties for the Waste Heat Recovery Units and how is that information collected as an order documentation to suit the business area Oil & Gas?The report begins with a description of the assignment and continues with the aim and background. A theoretical part describes the different areas and methods that have been important during the process.

The purpose of this study is to examine the situation of the school for boys 15-21 years of age lacking compulsory school attendance and is being located at five residential care units from the pedagogues? point of view. The study was conducted by interviewing four pedagogical leaders and two teachers. The results demonstrate that the boys can choose the subjects they study as well as the amount of time they spend on studying each week. The teachers include non-learning activities during their lessons.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

An organization that uses all of its improvement opportunities has a great advantage compared to its competitors. It is an important task when it comes to continuous improvements of every process. Up until September 2007, Husqvarna AB had a suggestion committee who evaluated every suggestion separately and the proposer received a payment if the suggestion was approved by the committee. However, this system did not work satisfying enough to fulfill Husqvarna?s needs and they are now looking for a system that can handle the ideas from the employees in a more effective way.

This report is the final part within our education, Industrial Organization and Economy focusing on Logistics and Management at Jönköping School of Engineering. The aim with this report is to coordinate recycle drives for deposited aluminum-cans and bottles collected from grocery stores within Jönköping county and locality.In the present situation both aluminum cans and bottles filled with drinks are distributed to the grocery stores by the brewery?s own distributers. At the same time as they supply the drinks they also discharge the grocery stores units with restored aluminumcans and bottles. To make it easier for the grocery stores to handle the goods in the future, all distribution of drinks ought to be directly delivered to the grocery stores own separate central warehouse.