In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

The study will examine how teachers relate to religious studies for middle school students. Religious studies are the oldest but also the most contested subject undergoing the most changes over time. The subject is far from being obvious. Politicians and people within the school community disagree about the subject?s content and its name, some within the school system but also politicians like to call it topic of life studies or belief studies, while others want to keep the name religion studies.

The aim of this master?s thesis is to examine how libraries can organize their collections in terms of library shelving and displays and to what extent these activities stem from a desire to create a user-friendly library. The thesis is based upon a case study of Arkenbiblioteket in Sweden and the material consists of a literature study and qualitative, semi-structured interviews with three librarians at Arkenbiblioteket. The theoretical framework consists of theories on information-seeking behavior, classification and displays. These theories form the basis of the analysis of the empirical material.The main reason for the changes in shelf arrangement at Arkenbiblioteket was a desire among the library staff to create a user-friendly library.

This bachelor thesis discus how store managers at Clas Ohlson motivate their co-workers at their everyday work.Motivation at work is essential, since engaging co-works makes the everyday routine work more effective. Otherwise that type of work can easily lead to unhappiness at the workplace which leads to less motivated workers, poor performance, even less motivated workers and this will start a negative circle.Other studies has shown that to in order to be pleased at a workplace and to keep qualified co-workers, the leaders needs to have knowledge in how they can use different techniques to increase staff motivation, but still motivation is not considered being an economic means of control. This has made me think about how leaders can motivate their workers at their everyday work.The questions at issue are:o How can leaders motivate co-workers in everyday work,o Which preferences the leaders consider control the individual motivation ando Which methods they can use to increase the motivation in the routine work.The purpose with this thesis is to study how leaders use their leadership to motivate workers to perform everyday work with more enthusiasm. To answer the question I have interviewed store managers at Clas Ohlson.In this thesis I have used a qualitative method, and I have compared relevant theories with the interviews I have done. Thus primary data has been gained through one-to-one interviews but also through mail interviews.

Inom IT-branschen läggs det mycket resurser på att effektivisera arbetssätt, och att hitta det optimala sättet att styra och leda projekt är en ständig utmaning. Dagens IT-organisationer befinner sig även i en situation där marknaden ställer krav på minskade kostnader men samtidigt en högre nivå av support och service. Utifrån detta har det genererats en uppsjö olika arbetssätt och tillhörande verktyg som alla har som mål att strukturera eller effektivisera systemutvecklingsprocessen. Ett av dessa arbetssätt är Lean IT som hämtar sina grunder från det väl beprövade produktionssystemet Lean Manufacturing.Inom systemutvecklingsbranschen arbetas det ofta i projektform och att ha en bra projektledning är ofta en av faktorerna bakom ett lyckat projekt. För att en projektledare ska kunna leda projektet till framgång krävs det att denne har en bra uppfattning om arbetssättet inom organisationen och projektgruppen.

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

Bakgrund. Vid tumörresektion i de orofaryngeala vävnaderna, utförs mandibulotomi för att skapa åtkomst och möjliggöra kirurgiskt avlägsnande. Allvarliga komplikationer har rapporterats i litteraturen och bidragande orsaker är den kirurgiska tekniken, strålningsterapin samt en inskränkt näringstillförsel till mandibelkroppen. Syfte. Syftet med denna studie var att undersöka om bevarande av periost vid utförande av mandibulotomi, leder till färre patienter med komplikationer relaterade till mandibulotomin.. Metod. Patienter som genomgick mandibulotomi mellan 2003-2012 vid Skånes Universitetssjukhus granskades retrospektivt.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

Abstract Background: Type 1 diabetes is a chronic disease that worldwide greatly increases among children and adolescents. Major demands are required from the individual who has this disease, which also requires significant knowledge from the nurses so they can be able to develop and create individual conditions for children and adolescents. Thus, the children and the adolescents can be able to take responsibility and feel secure in their own care. The nurse's techniques and specific tools in this work are however not particularly noteworthy and therefore needs to be advised.Aim: The aim of this study was to describe the experiences nurses have of supporting adolescents, between 12-18 years, with type 1 diabetes to an increased understanding of the disease and also to examine the methodological aspect data collection in the articles of this study. Method: A descriptive, literature study according to Polit and Beck (2012).

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

Au sein de la direction informatique RENAULT (DTSI), la plupart des chaînes d?assistance pour les utilisateurs des systèmes d?information, sont modélisées à travers un outil de gestion d?incident (ARS/GII-v2). La majorité des ces incidents est créée par le service des Centres d?Appels, Téléphonie et Visioconférence (DTSI/DSO/CATV). Selon leur complexité ou leur caractéristique, les incidents suivent un cycle de vie qui fait intervenir plusieurs équipes des chaînes d?assistance.

Boliden Mineral Ab's mine in Garpenberg, Dalarna is going through a massiveexpansion. The annual ore production is being increased from 1,4 million tons to 2,5million tons in less than two years period of time. Along this expansion thedepartment of mining techniques is administrating a project of optimizing the shortterm planning for the mining production. Garpenberg have since mid 90s storedinformation from all mining processes in a database.The information consists of time data from all the different activities required in themining process, for example charging, blasting, loading etc. The database also containstime data of delays that are affecting the production.