AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

Demand has become increasingly difficult to forecast in today?s volatile markets. Being able to produce towards real demand is becoming vital for companies, since inventories of finished goods are expensive to maintain and because miscalculated products tie up capital that in the end is never repaid. More and more companies are using postponement strategies to delay the process of producing until real demand has become known. Tooling Support Halmstad is a company within the manufacturing industry, which has become aware of the benefits with postponement strategies for parts of their production.

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths.

The process of food production has changed dramatically over the past one hundred years. Industrialization has led to large units of production, manufacturing, distribution, marketing and retail business. The final food product, in this system, is quite often fairly anonymous and the consumer will most likely know very little concerning the origin of the product. In recent years, the market for locally produced food has grown. There is an increasing interest in and demand for locally produced food items.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The aim of the present literature study was to define and describe the area ?compliance in veterinary medicine? (i.e. the way treatment recommendations are being performed) and discuss the factors that influence the level of compliance. Based on the findings, a model that intended to increase compliance in orthopedic postoperative rehabilitation of dogs was designed. In the daily work as a veterinary nurse it is essential that one provides the best possible care to the animals from the beginning to the end of the treatment.

During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.

Möjligheternas värld är en utställning som ska presenteras på olika mässor. Hjärtat i utställningen är automationsfabriken som är en automatiserad anläggning som ska tillverka leksaksbilar. Automationsfabriken ska invigas på mässan Scanautomatic och ProcessTeknikden 9-11 oktober 2012. Då möjligheternas värld är ett samarbete mellan näringsliv och skola bidrar företag och skolor med hjälp och samarbetar för att projektet ska bli lyckat. Prevas del i projektet är att ta fram ett styrsystem i form av ett MES och SCADA system till fabriken samtatt göra hemsidan där bilar kan beställas och integrera den med styrsystemet.Målet med examensarbetet är att utveckla styrsystemet och ta fram ett HMI genom att använda programvaror från Wonderware.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Marketing is a broad subject with many different areas. Part of the marketing that has been of great importance is the 4P:s also known as the marketing mix. Marketing mix is included in one of the traditional marketing approaches. In recent years there have been some changes and have begun looking at new ways of looking at marketing. One of the ways is entrepreneurial marketing to the effect that the company tries to use its resources optimally.

Romanies have long lived outside the fabric of society and have long been exposed to discrimination in Sweden as well as the rest of Europe. The purpose of this study is to elucidate the experiences of young Finnish romanies in their everyday lives as well as their perceptions of living as a minority group in Stockholm today. Previous scientific researchers have often concentrated their studies on the romanies as a group, so we, the authors have chosen to concentrate our research on the individual?s own experiences. We, the authors have chosen to use a qualitative approach, to give us the opportunity through using open ended interview techniques to comprehend and interpret the individuals own accounts.

Pharmaceuticals that are found in marine ecosystems are a threatening environmental concern, which is known to harm both animal and plant life. One of the reasons for this problem is that the waste water treatment techniques are not optimized to clear waste water from its pharmaceuticals contain. In this master thesis four Swedish treatment wetlands were studied, and their ability to reduce numerous pharmaceuticals in waste water. The four treatment wetlands that were studied were those in Oxelösund, Trosa, Nynäshamn and Eskilstuna. Two ecotoxicological tests and chemical analysis were used.

- ABSTRACT ?Title: Winners of the Web ( Webbens vinnare)Number of pages: 35 (including enclosures)Author: Lydia KellamTutor: Else NygrenCourse: Media and Communication Studies CPeriod: Fall Semester 2006University: Division of Media and Communication, Department of Information SciencePurpose: The aim of the research paper was to see Internet and the digital techniques impact on marketing communication and consuming behavior on the Web. By understanding the relationship between marketing communication and consumer behavior my intentions were to comprehend how consumer behavior on the web could be understand. The purpose of this paper is to understand how different marketing activities on the Internet are followed by consumption.Material/Method: By using focus group interviews I wanted to study how individuals act on the Internet. How different activities such as communication and participation on the web could lead to consumption on the Internet.