The objective of this study was to examine three common mobile phoneplatforms in relation to their network traffic features. The platforms to beexamined are Android, iOS 5 and Windows Phone. After the investigation wascompleted a prototype application was implemented in order to demonstratethese features in the most suitable platform. The application will function as atelephone call exchanger. In addition, the application must also send the userstatistic to a Web server, accept contacts from a Web server, as well as having aspecial administration part in which the userstatistc can be presented.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

AbstractTitle: How has IAS 38 affected accounting in small and large companies?A study of the differences in the accounting of financial ratios between small and large companies.Authors: Jasmine Choudrey & Rana QadriMain Course: Business EconomicsThe aim of this study is to make a comparative examination between small and large companies in Sweden and to analyse how accounting of intangible assets has been affected or changed due to the introduction of the new accounting recommendations and IAS 38.Main theory: There are no theories available on these type of researches due to the fact that the introduction of the IFRS is relatively new. Instead the essay discusses facts about the financial ratios and IFRS as a starting point for the study.Method: The examination will be a combination of both quantitative and qualitative techniques. The quantitative part will be based on statistics and financial ratios from the different companies annual reports. These financial ratios will be analyzed by performing a confidence interval.

In the light of ever increasing international trade around the globe, affecting men and women in all countries, it is surprising that so little attention is given its gender effects. The effects of trade are said to be gender neutral, but could potentially act reinforcing on the existing gender patterns in a society. The aim of this thesis is to examine whether the implications for men and women in relation to trade liberalization can be found to differ. By stylizing some differences between men and women, this is done by examining the theoretical implications mainly via the Heckscher-Ohlin model and through a Beckerian approach. The implications found are then compared with the findings in existing empirical work.

Dimensional stability is an important aspect of fuel mechanical design and licensing of new fuel designs for nuclear power plants. Dimensional changes within the reactor can affect the safety margins against overheating of the cladding and the pellets, therefore it is crucial that the dimensional changes are kept to a minimum.The profits per produced kiloWatt hour continue to decrease for the Swedish nuclear power plants. Some reactors are even operated with a calculated loss. To reduce fuel costs and thereby improve the profit some reactors are operated with higher uranium enrichment, so that the assemblies can reach a higher average burnup. This increases the neutron fluence to the pellets, cladding an spacers.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

Möjligheternas värld är en utställning som ska presenteras på olika mässor. Hjärtat i utställningen är automationsfabriken som är en automatiserad anläggning som ska tillverka leksaksbilar. Automationsfabriken ska invigas på mässan Scanautomatic och ProcessTeknikden 9-11 oktober 2012. Då möjligheternas värld är ett samarbete mellan näringsliv och skola bidrar företag och skolor med hjälp och samarbetar för att projektet ska bli lyckat. Prevas del i projektet är att ta fram ett styrsystem i form av ett MES och SCADA system till fabriken samtatt göra hemsidan där bilar kan beställas och integrera den med styrsystemet.Målet med examensarbetet är att utveckla styrsystemet och ta fram ett HMI genom att använda programvaror från Wonderware.

Information Technology (IT) makes it possible to electronically distribute data between actorswho are in geographically diverse areas. Nowadays, information is sent less frequently throughtraditional correspondence in favor of faster electronic equivalents via the internet.Despite effective IT environmentand secure encryption techniques choose some actors to sendinformation through physical delivery. This phenomenon occurs in those working withconfidential information as it is handled by a number of rules and safety regulations.Based on a set of rules and requirements, we have looked over the possibility of sending sensitiveinformation electronically over the internet. The aim was to find general guidelines for howcompanies and organizations should manage and send sensitive information over insecurenetworks. This led us to our research question: How can information be exchanged betweenactors in geographically diverse areas be categorized and encrypted so that it can be transportedover the internet without security or integrity deficiencies?To answer the question, there was a case study at a defense company.

Atlas Copco Tools is a world leading company in tool manufacturing. The productionin Tierp works hard to improve their assembly to maintain its position. This thesis isa part of their improvement efforts to be a more Lean production.The main focus for this thesis was to identify the material flow in the kanban system,which used to supply the assembly groups, focusing on the material flow to assemblygroup 9 and the assembly group 3. Group 3's material flow within the kanban systemwas perceived to perform better than the group 9. The handling of kanban materialand their working methods in the two groups was identify those differences whichaffected the kanban system.As an alternative material supply a study were done in kiting.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

AbstractSweden has had a long tradition of freedom of the press and freedom of speech. Today the judicial area is regulated by the constitution of the press and the constitution of speech. The purpose of the two constitutions is to secure the right for every Swedish citizen to express their thoughts, opinions and feelings.The constitutions are designed to regulate the techniques with which the information is distributed and not to regulate the information in itself. This fact has caused a debate to arise on the subject whether the constitutions are still suitable to regulate the judicial area when the technical development causes the constitutions to get out of date and in need of constant updating. As a rule the usage of social media is not regulated by the constitution of speech the information distributed through these webpages can be included by the protection given by the constitution but very few of these webpages fulfill the criteria?s demanded by the constitution.The purpose of this essay is to ask the question whether the constitution of speech should be reformed to better regulate the technical development in the future.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.