In this undergraduate thesis you will venture on a journey through the land of democratic values and urban planning. My research question is stated as: whether or not urban planning can show effects on democratic values and whether or not the municipalities in Sweden takes these possible effects into account when planning their city centres. You will in my theory part of this thesis be able to read about different views on urban planning and on democracy. Famous authors like Robert D. Putnam and Richard Florida will be examined as well as other theorists on democracy and urban planning.

Learning organizations and organizational development are interesting subjects that does not examine municipal organizations and private organizations an equal amount.  Furthermore, there exists little research on the effects of competence development for individuals in a leadership role within organizations. Because of this, we wanted to examine the impact of competence development in business modeling and how it affected local government activities. Competence development is used by organizations to develop their business and achieve a greater competitive advantage, but does competence development for individuals in a leadership role lead to organizational development? This paper examines competence development in the form of a business modeling course via the Bitstreamproject and the effects that occur within three municipalities as a result of the competence development. By interviewing three participants and four coworkers within different municipalities and studied the data from the Bitstream project, we can not conclude that competence development within business modeling leads to organizational development, only that it exists a tendency for it.

The national spatial planning guidelines and the subsequent legal regulation in the Natural Resources Act and the Environmental Code has been a part of the Swedish planning system for almost 40 years. In the recent years, critics have claimed that the regulations are outdated and does not work the way it was intended. This paper examines closer why it is perceived that the regulations does not work, with a focus on how the national interests are managed in the municipal planning. Why is the national interests not applied in the municipal planning as intended? Is the error in the system or in the implementation of it? The aim of this essay is to study the gap between theory and practice by studying how the land management provisions in the Environmental Code is applied in five selected municipalities.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The aim of this thesis is to examine whether law reforms in the detailed planning process can be an aspect that gets in conflict with the citizens rights to participate in the Swedish planning through dialogue, and how five chosen municipalities are working with citizen participation. To be able to answer the aim of the thesis a literature study and five semi-structured interviews was performed in purpose to get wide-ranging information from municipal officials working with detailed planning handling. Law changes that aims to make the detailed planning process more efficient has been implemented partly to satisfy the needs of dwellings since the detailed planning process among master builders seems to be slow and inefficient, which to the them means higher costs. The requirement on having a detailed planning program was taken away when the new planning law was adopted year 2011. The planning program was including a moment of citizen dialogue. The case studied municipalities have not been affected in this law change arguing that it?s still possible to bring a program if needed.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

 The 1st of July 2006 Sweden made a change of authorities in the system concerning the reception of separated asylum seeking children. Prior to the change, the Swedish Board of Migration was held completely responsible for the reception of these children, who arrives in Sweden without their parents or any other relatives to care for them. Since the alteration of the law (1994:137) the responsibility for the housing of these children now lies within the Swedish municipalities, while the Board of Migration still handles their legal commissions. The change was intended to fundamentally improve the conditions under which these children were taken care of. However the implementation took a severe wrong turn when the municipalities weren't prepared for their new responsibilities and the immediate result was alarming. This qualitative study is based upon interviews with the people responsible for the reception of the separated asylum seeking children in the municipalities of Kronobergs County, as well as one of the two people in charge of the new system at the Swedish Board of Migration.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

This thesis serves to examine how manufacturing SMEs consider outsourcing. Furthermore, we aim to identify the main characteristics and patterns for these types of companies that can explain their rationale in such a decision. The chosen method for this thesis is abduction and selected research approach is multiple case studies. Seven case studies have been conducted at EAB AB, Esbe AB, Hörle Automatic AB, Pelly Industri AB, SGV Industrier AB, Swede-Wheel AB and Wulkan AB. Our findings have illustrated that although traditional outsourcing theory provides a good platform for explaining the rationale behind outsourcing decisions in SMEs, we have identified additional considerations that SMEs, operating as 2, 3 or 4-tier suppliers towards OEM-corporations, make.

 The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

Making the work in the public sector more efficient is something that has been seen as necessary during the later years. One way to do this on municipal level has been to apply solutions former used mostly by private companies. The organisational parts have also been adjusted to existing conditions in this work of change. For example more and more municipalities have come to use the purchaser-supplier model since the beginning of the 1990's. Norrköping, Linköping and Motala have been chosen in this essay for a closer study of the effects of the changes of the 90's, from an efficiency point of view.

The national spatial planning guidelines and the subsequent legal regulation in the Natural Resources Act and the Environmental Code has been a part of the Swedish planning system for almost 40 years. In the recent years, critics have claimed that the regulations are outdated and does not work the way it was intended. This paper examines closer why it is perceived that the regulations does not work, with a focus on how the national interests are managed in the municipal planning. Why is the national interests not applied in the municipal planning as intended? Is the error in the system or in the implementation of it? The aim of this essay is to study the gap between theory and practice by studying how the land management provisions in the Environmental Code is applied in five selected municipalities. The aim is also to find interesting issues for futher studies of the topic.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.