Companies have in the past decades changed fromtraditional manufacturing organizations into serviceorganizations. For these service organizationsinformation and competence have become animportant resource. The traditional view oninformation is that an employee use and search forinformation to reduce uncertainty for their decisionmaking. Even though information is strategicallyimportant for organizations, information is not valuedin any way. Hence, this thesis aims to valueinformation in terms of the utility it brings to theorganization.The conclusion is that four factors are important whenvaluing information in terms of utility.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

This essay examines the limits of marketing strategies in the online casino industry, focusing on how data-driven and advanced marketing practices influence consumer behavior and contribute to problematic gambling consumption. By observing the online casino industry, the study identifies how companies use sophisticated data analysis methods and psychological techniques to attract and retain customers, raising significant ethical and social issues. The study highlights three key perspectives: the consumer's, the producer's, and the legislator's. From the consumer's perspective, it explores how various consumer behaviors, from responsible gambling to problematic overconsumption, are influenced by marketing and gaming experiences. This includes an analysis of how cognitive limitations and psychological biases can lead to irrational decisions and an increased risk of gambling addiction. From the producer's perspective, it examines how gambling companies use marketing strategies and technologies to increase profitability and what incentives they have to take social responsibility according to modern Corporate Social Responsibility (CSR) principles. It appears that companies do not see CSR as a business goal beyond the risk of current and future regulatory compliance requirements and policy changes. From the legislator's viewpoint, the current regulatory framework for the gambling industry is discussed, including the changes that occurred in 2019 when the special monopoly form we had in Sweden was transformed into a license market.

Consultancy as a profession has always been a debated topic and has constantly been surrounded with a kind of secrecy. People have a hard time defining what consultants actually do and how they do it. It seems that they are simply waving their magic wands, performing wonders. We have therefore decided that the purpose of this study is to unveil the secrecy around the profession. By conducting interviews and analysing literature we have examined recruitment processes in three different consulting industries and their wanted personal characteristics.

This essay discusses how Private Equity companies (PE companies) reason when evaluatingpotential companies to invest in through its investment criteria. Also methods they utilized toenhance companies value during their ownership period is treated.PE-companies invest in companies where they can see a good future development. Theintention is that through various methods to increase the company's value prior to divestment.In the UK and the U.S. in particular, the market for PE has long been great. In Sweden, insteadthe developments in the industry went a little slower.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

Global catch fishery is said to been oppressed to its limit (Boyd & Schmittou, 1999), further implying aquaculture might be the only solution to the world demand for fishery products. The applied term aquaculture in this paper refers to the one used by NOAA (2008); breeding, rearing, and harvesting of plants and animals in all kind of water environments, including but not limited to ponds, rivers, lakes, and the ocean. According to Shamshak & Anderson (2008, p. 74) aquaculture has over the past 20 years been the fastest growing food sector with an average annual growth rate of 8.7%. It further represents approximately 37 % (Shamshak & Anderson, 2008, p.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

Being able to predict the future had been an invaluable competitive advantage for any corporation. Forecasting is a vital part of any business, hence a good forecast allows enterprises to invest in a beneficial way. However, there are several ways to prepare forecasts and the forecast methodology can vary. An industry that is dependent on forecasts is the energy industry. By predicting consumers' energy consumption, Swedish energy companies can hedge on the Nordic power market Nord Pool.

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Given the turbulent situation in the Swedish media industry few researchers have turned towards the view of the situation from the perspective of the journalist who is in many ways under pressure. This study therefore aims to take this perspective by combining recent research in the media field with proven theories in the field of motivation. Through deep interviews with eight journalists active in the general news reporting area, the most important factors in terms of their motivation have been suggested and analyzed. There is a distinction between different types of motivation including intrinsic and extrinsic aspects. The intrinsic factors include investigational journalism and the social part of doing research.

In my thesis I have sand blasted different type of woods - ring-porous and diffuseporous deciduous tree species and conifers - to show different results depending on the species, the direction of the grain and the effects of surface treatment of a blasted surface.The results of my tests were sometimes unexpected, such as that the sand from blasting almost completely disappeared, that all wood surfaces after blasting exhibited a much lighter or paler surface than before and that the diffuse-porous tree species showed differences in hardness between the beginning and end of annual rings.By creating a library of different kinds of wood and sandblasted surface treatment, I have created a reference bank that I will be able to use me in the manufacturing of interiors, furniture and other objects..

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

A growing number of companies realise that to achieve their environmental goals and satisfy stakeholder expectations, they need to look beyond their own facilities and to involve their suppliers in environmental initiatives. A life cycle approach means that the production system should be optimised as whole, across national boarders and individual organisations taking part all the way from extraction to disposal. This study is a Life Cycle Inventory of resources used when producing a piece of cotton garment and the method is based on the standardisation series of ISO 14040-43. The area of study, Tamil Nadu the most southern state of India, accounts for more than 90% of India?s knitwear exports to Western Europe.

Purpose: The purpose of this thesis is to give a contribution to the studies of what strategies those are of importance for challengers in consumer technological markets aiming for the market leader position. To be able to investigate this phenomenon we have chosen to study Microsoft?s second position in the video game console industry. In addition, we want to illuminate Microsoft?s competitive advantages, how Microsoft can take advantage from Sony?s setbacks and what strategies those are of importance for Microsoft in the battle of becoming the market leader.