År 2011 startade SDC, skogsnäringens IT-företag, arbetet med att övergå från en funktionsorganisation till en processorganisation. Detta har medfört förändringar i ledarskapet då tidigare avdelningschefer har ersatts med process- och resursägare. Syftet med denna undersökning har varit att identifiera förbättringsförslag för samarbetet mellan process- och resursägare vid SDC. Studien har en kvalitativ ansats då samarbetet mellan process- och resursägare har studerats. En kvalitativ ansats har valts då målet är att uppfatta informanternas upplevelser kring samarbetet mellan process- och resursägare så nära verkligheten som möjligt.

A water treatment unit consisting of two aeration basins, two settling tanks, a residence basinand a horizontal subsurface flow wetland were used to treat wastewater from an eggprocessing factory in Brazil. The aim of this paper was to determine the efficiency of thesystem in reducing nitrogen, phosphorus, BOD5 and TSS (among other parameters) andgetting a further understanding on different kinds of constructed treatment wetlands as well astheir nitrogen and phosphorus removal processes. The wastewater from the factory consistedof process water from manufacturing and water used for cleaning, no stormwater or sewagewater entered the system. Tests were taken three times a month from October 2013 ?til April2014.

Denna studie behandlar begreppen process och produkt. Syftet är att genom ett hermeneutiskt perspektiv undersöka några bildlärares syn på begreppen process och produkt i bildundervisningen på högstadiet. Tidigare har fokus legat på elevers färdiga produkt men idag är bedömningen i bildämnet mer fokuserad på elevers process (Skolverket, 2012:3). Undersökningen genomfördes genom  kavlitativa intervjuer. Intervjufrågorna är förankrade i Lindströms (2002:4-5) process- och produktkriterier.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.

The aim of this diploma work was to obtain a review of the appeal process in Sweden under the Planning and Building Act and the possibilities of appeal in the planning and building permit process. The work was intended to identify potential problems surrounding the appeal process and possible efficiency measures. The goal was to form a report that provides a satisfactory overview of the appeal process in theory and practical application as well as provide relevant concrete proposals on how the appeal process can be streamlined.Background and facts surrounding the work were taken from different types of literature and through several interviews with representatives in government, industry and politicians.The main problems related to the appeal process are in the long processing times and the high number of appeals. There is a great interest to streamline the appeals process and the government is going to launch studies in which possible future actions will be investigated.It is possible to appeal for up to two instances before you need a so called ?leave to appeal? in order for your complaint to be passed on to the next instance.

In a global context the traditional democratic process is facing new challenges. Scholars are talking about a transition from government to governance, where local and regional networks as well as international collaboration are an important part in how regional policy is produced and implemented. In this paper the processes in regional projects funded by the European Union are considered, and related to the traditional democratic process. The study has been fulfilled through informant interviews with representatives from four EU-projects. The interviews are supplemented by a qualitative text analysis of current statutes.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

On the first of January 2012, a new public authority was formed in Värmland, due to a new legislation on public transport. The first task for the new public authority was to produce a plan for the development of public transport. In order to do so, it had to execute an extensive consultation process about the long-term goals of public transport. The purpose of the thesis is to investigate how a public authority can use a consultation process as a means to clarify accountability and produce unified goals. To answer that, I have done a case study about how the new regional public authority in Värmland for public transport has acted in the process of writing a plan for the development of public transport.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

It is important that companies knows how to handle a complaint when they receive one from a customer. This information could the company take care of and use when they develop new services. Furthermore a good complain handling leads to satisfied and loyal customers which increases the revenue for the company. We have examined how SAS handle their internal information process and if this process affects the information and in that case how. The study is performed with a qualitative method, based on deep interviews.

This thesis has aimed to study steering process and institutionalization in the context of educational policy work. This has been conducted by using empirical material from the political decision-making process that preceded the implementation of a new national program on how principals should be educated and certified. By using an aggregated theoretical point of view containing new institutionalism and traditional Swedish curriculum theory, the process was analyzed from different perspectives. The results depict a process that contained several actors who tried to shape the principal education program differently. From the theoretical perspectives, the decision-making process could be understood as an act of both self-interest as well as trust in their own beliefs and cultural values.

Process standardization is a topic that has generated a lot of research and literature. At first, the focus was on production; today processes are used in all different kind of business areas.The aim of this study has been to analyze how processes can be applied on development businesses and how IT systems affect the result of the process. To accomplish this, we have asked questions such as what standardization is in a development process? Why are the processes standardized? What difficulties can appear with standardization? And how the IT-systems affect the result of the process?To answer these questions, we have preformed a case study on Saab. Saab is a well know Swedish company who are working with a project called the GMS-project, where they develop processes to cover the whole company´s business areas.The literature gives the reader an understanding of processes and standardization.

Uppsats för avläggande av filosofiekandidatexamen iKulturvård, Ledarskap i slöjd ochkulturhantverk15 hpInstitutionen för kulturvårdGöteborgs universitet2014:35.