This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

Title: The component approach - From the harmonization process as a background to the perception of benefits and costs as effects.Authors: Elin Börjesson & Emma KarlssonTutor: Titti EliassonKey concept: Harmonization, Component approach and Benefit/CostBackground: With IFRS for SME's as a basis, the Accounting Board developed K3 which shall apply from financial year 2014. Upon introduction of the K3 companies will be forced to apply the component approach. When K3 with the associated component approach went out for consultation it resulted in a debate where some actors opposed the imposition of a requirement and not an option. It was questioned whether the costs with the component approach would be greater than the benefit of the implementation.Formulation of the problem: How is the introduction and use of the component approach seen by different operators from a benefit-, cost perspective?Aim: The aim of this essay is find out how the introduction and use of the component approach is seen by different operators from a benefit-, cost perspective.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Background: As companies are operating in more globally and complex environments, the need for risk control is accelerating. In an ever-changing environment, companies cannot merely focus on traditional risks, which include financial and insurable risks. To maintain competitiveness, companies need to extend their risk management to include all risks, traditional as well as operational and strategic risks. Purpose: The purpose is to describe and position risk management for Telecom operators, in comparison with the risk management literature, with regards to structure, processes, learning process, visions and benefits. In addition, our aim is to link risk management perspectives with the different strategies for knowledge management.

The research in this paper aims to producing a home version machine thatcan dry and make biological waste into compact pellets. This product ismade primarily for those who want to improve the environment and reducethe energy consuming process of separating the biological leftovers fromother waste in the large processing plants and save money due to reducedpickups of waste. Since there is no commercially available product thatdoes what we want to achieve we had to start from the beginning with boththe design and the mechanical aspects. The result is a machine, that fits inour homes, and in an easy and inexpensive way reduces the amount ofbiological waste that needs to be collected by the public wastetransportation system. This is done without reducing any of the energy inthe waste and it can still be used to compost or by large-scale plants that usethe waste to make electricity.

Purpose: To examine how a tour operator works to implement sustainability in the development of the business, as well as what significance it has to consumers in selecting a tour operator. Furthermore, the purpose is to provide recommendations on how tour operators should work to communicate their commitments.Methodology: The research strategy applied is a case study which follows an abductive approach. Qualitative and quantitative methods were applied to complement each other. A semi-structured interview with a tour operator and a consumer survey constitute the empirical foundation.Conclusion: The conclusion of the study is that consumers show a positive attitude towards CSR, but do not see it as a determinant when choosing a tour operator. Thus, CSR does not constitute a competitive advantage against competitors.

This thesis work has been performed on request by SWT (Scandinavia WeldTech AB). SWT manufactures, develop and sell ready to assemble building systems for concrete rafter beam applications. The beams in this system consist of a u-beam that is welded to a flange. To be able to fill the beams with concrete there is holes in the beams top end. The holes are made in a ?punching machine?.  These holes are cut out and the remaining steel piece is bent down in the u-beam.

This thesis aimed to study the interaction between an educational technology system and its users and give suggestions for design improvements. The technology system is called EDIT (Educational Development through Information Technology) and has been developed and applied at Linköping University?s Faculty of Health Science. EDIT supports Problem Based Learning and enables scenarios to be presented through the World Wide Web. The study was divided into two parts.

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

This study aims to analyze the risks with building new households between railroads and shore, the focus of the study lays on Öbacka strand in Umeå municipality. The study also investigate if a land use conflict has taken place and how it was handled.The paper is based on different documents that was central for the work of planning the households and some interviews with operators that was highly involved with the planning of the area.The results shows that there is several risks with establishing new household between railroads and shores. Mainly because of the exposure of noise from the railways, though the risk for impact on the living environment for animals were low in this case there is a generally risk that it could get negative effects. It also a very important that the availability to the shore is secured. Planning in this type of area involves a great number of operators can easily cause a conflict due to the different perspectives on how the land should be used in the future, and also because of protecting different interests.

The purpose of this study is to search and analyze different logics that operators use in the work of helping juvenile delinquents to break their criminal behavior. New institutional theory is used in this study to analyze the results. The study was conducted through qualitative interviews of six professionals in two municipalities which work with juvenile delinquency. There are two questions that we want to address in this study. The first one is what methods the social workers are using in two middle large municipalities to help youth to brake there criminal behavior.

The objective of this study has been to examine which significant values are of importance in the telecom sector today, and in a continuing perspective yet to be. To ensure the factors of relevance in the study, we have identified three purposes: - Our first purpose is to clarify the eminent values in the competitive market of the mobile phone operators today, and the reason for its importance.- The second purpose is to understand the function of the brand regarding to value creation and loyalty in the sector of mobile phone operators.- The third purpose is to explore the potential approaches for mobile phone operators to increase value.In this study, our approach has been a qualitative methodology by conducting seven interviews with respondents related to the telecommunication sector.As a result of the process, we find the need to divide the concept of value into two dimensions, which we entitle organizational related values and customer related values. We have found the values related to the characteristics of the market in aspects of its infrastructural features but also in regards to the homogenous core service.Our findings in the empirical data with support to our theoretical frame of reference, is the current highly important organizational related value of constant high result quality (well-functional technological aspect), and the value enhancer by a low price; the strategy of bundling also results in higher value. This result in customer related values that perceives as safeness, availableness and convenience. The brands are a significant source of customer related values with identity value, image value and assuredness. A continued advancement in process quality and individualization will imply greater customer related values of closeness, freedom and flexibility. .