All inclusive travel has become a popular way to travel abroad. When tourists pay for everything in advance their need for contact with the local people will be reduced. The consequences of this can be dissatisfaction from the local people as they are left out and do not share the financial benefits created by tourism. During the purchasing cycle of an all inclusive travel, it is possible that the tour operator can influence a sustainable development.The aim of this paper is to compare how a large and a small tour operator in their purchase of all inclusive holidays interacts with local players to create sustainable development, thereby creating a surplus value to the customer. The hypothesis is that the amount of knowledge and application of this knowledge regarding sustainable development differs in the purchase process between large and small tour operators.This paper was carried out as a case study.

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

Modern forestry requires a high degree of machine traffic for clear felling and scarification operations. The machines most frequently used are big and the traffic often results in tracks on the forest ground. There are many small streams running through a forest, in connection to logging operations, machines might cross these frequently. These crossings could result in the erosion of fine particulate inorganic matter, which ends up in the stream. The aim of this thesis was to give a general description of small forest streams of order-one in the county of Värmland and to determine the frequency of machine tracks in small streams.

The tourism industry in Sweden has expanded in recent years and the increasing industry has meant that customers are in need of a reseller for their trips abroad. Today there are three types of retailers available. These are : Traditional travel agencies , tour operators and online travel agencies.Online Travel agencies are the most modern online option for customers. Their existence has made it easier for the customer and reservation can be made anytime and anywhere. The competition has intensified between the three retailers and the traditional alternatives must find new ways to survive.

This survey has as its aim to see how two local newspapers in the city Växjö and the region of Kronoberg in Sweden reported and acted in connection to the referendum taking place in 1922 whether or not alcoholic beverages should be prohibited. In order to do this we analyzed Smålandsposten and Nya Växjöbladet to see their reporting. We found that the numbers of articles and debate contributions increased during the months closer to the referendum. We also found that Nya Växjöbladet where slightly supporting the prohibition of alcohol while Smålandsposten where against it. The arguments used by both sides during the debate were also analyzed.

One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.

This study aims to analyze the risks with building new households between railroads and shore, the focus of the study lays on Öbacka strand in Umeå municipality. The study also investigate if a land use conflict has taken place and how it was handled.The paper is based on different documents that was central for the work of planning the households and some interviews with operators that was highly involved with the planning of the area.The results shows that there is several risks with establishing new household between railroads and shores. Mainly because of the exposure of noise from the railways, though the risk for impact on the living environment for animals were low in this case there is a generally risk that it could get negative effects. It also a very important that the availability to the shore is secured. Planning in this type of area involves a great number of operators can easily cause a conflict due to the different perspectives on how the land should be used in the future, and also because of protecting different interests.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

Our Bachelor?s Thesies has been performed in co-operation with Cellplast Direkt AB inLaholm. Our task was to develop a construction that cuts gussets to ceiling disposition as isused to isolation.Our goal with our construction was to increase the degree of automation so that theproductivity increased and also meet the market which is getting tougher and tougher due tothe future business cycle.Cellplast Direkt gave us free hands in order to enable new ideas. A pair different principleproposal was developed and prepared to a final structure.The Bachelor?s Thesies resulted in one PLC - governed machine with three engines that runthree different moves, wich does that the degree of automation increases and the risk forerrors decreases.We have developed a complete production bases to Cellplast Direkt and our hope is that thecompany comes to produce the machine in the future..

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

The traditional view of maintenance is machine-based, where acute maintenance tasks are highly valued. Preventive maintenance is viewed as secondary and less desirable to work with. The more modern view is to regard maintenance as a process. The machine-driven tasks are still necessary but are viewed as a part of the big picture.The purpose of this study is to examine how to high light general difficulties concerning maintenance management to aid organizations to reflecting upon their own situation. The study is based upon a pilot study initiated by ProcessIT concerning relevant key figures in maintenance.

Mobile telecom and the Internet are converging, which opens new possibilities for market actors to create business through the mobile handset. At the same time market experts are predicting that mobile operator?s existing dominance in the telecom market will in the future decline as new technology such as VoIP and services will erode the operator?s traditional revenue model. This implies that mobile operators will need to rethink their dominant business logic to create new value for their customers. Mobile operators are aiming to expand their existing revenue model through advertising in the mobile handset and are searching to create new business models that evolve advertising sales.

To be able to secure a safe and reliable power supply is becoming increasingly important since society depends on services and functions that need continuous power supply. The delivery rate in Swedish power supply is 99.98 % which insists on a high availability. During the past decade several storms has passed Sweden which resulted in large amount of tree felling leading to extended power outages. During these storms many socially critical activities, such as electric utility company Fortum, experienced disruption in mobile communication which affected the crisis management. This paper has investigated Swedish mobile operators? crisis management at Hi3G, Tele2 and TeliaSonera with a case study of the storm Dagmar that hit Sweden during December in 2011.

The purpose of this report is to make an evaluation of the self-monitoring for scarification which Stora Enso is using and this study deals with the effects and importance of scarification. A comparison is made in this study with the purpose to highlight any differences between some of the leading forestry companies and significant forest organizations in Sweden. The companies represented in this report are Korsnäs, Mellanskog, SCA, Sveaskog and Södra. In the beginning of this study an interview form was set up together with Daniel Forsberg at Stora Enso. Stora Enso is the head object of this report and seven interviews were made within that company. At the other companies only three interviews were made within each one, with an exception to Mellanskog who wished four.

All inclusive travel has become a popular way to travel abroad. When tourists pay for everything in advance their need for contact with the local people will be reduced. The consequences of this can be dissatisfaction from the local people as they are left out and do not share the financial benefits created by tourism. During the purchasing cycle of an all inclusive travel, it is possible that the tour operator can influence a sustainable development.The aim of this paper is to compare how a large and a small tour operator in their purchase of all inclusive holidays interacts with local players to create sustainable development, thereby creating a surplus value to the customer. The hypothesis is that the amount of knowledge and application of this knowledge regarding sustainable development differs in the purchase process between large and small tour operators.This paper was carried out as a case study.