This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.

Internrevisioner är ett krav om företag och organisationer är certifierade enligt ISO 9001 eller ISO 14001. Främsta syftet med internrevisioner är enligt Wahlman (2004) att bekräfta att ledningssystemet och de arbetssätt som beskrivs i ledningssystemen ger den önskade effekten. Examensarbetets omfattning är att beskriva och jämföra de två olika metoderna för internrevisioner som finns inom kärnkraftsbranschen. Dessutom ges konkreta förbättringsförslag för de olika internrevisionsmetoderna. De två olika metoderna för internrevisioner har författaren studerat på fallföretaget Ringhals AB som är ett kärnkraftverk.

The aim of this report is to increase the knowledge and understanding of the problems within the production at AQ Enclosure systems, and thereby achieve a more stable flow throughout the whole process, a better working environment and better competition advantages. The internal flow along with the external cooperation is very important for the company, because it views flexibility and short leadtime as it is the most important competitive means. The part of AQ production that?s been investigated is the manufacturing of ATM-machines, where the costumer is Banqit. This company is a rater small company with about 4 % of the world market of ATM-machines.In order to achieve the aim of the report extensive interviews have been carried out with employees at AQ.

Syfte & problemområde:Syftet med denna uppsats var att undersöka hur dagens vuxna barn upplevt deras uppväxt i en familj med alkoholmissbruk. Jag ville även studera hur dessa personers nuvarande livssituation såg ut, och hur den påverkats av den specifika uppväxten, med en missbrukande förälder.Metod & material:Studien är en kvalitativ intervjustudie, där empirin har samlats in genom intervjuer med fem vuxna barn till missbrukare. Materialet tolkades och problematiserades utifrån ett systemteoretiskt perspektiv med fokus på familjen, och stämplingsteori med fokus på individen.Resultat & slutsatser:I resultatet framkommer det att flertalet av informanterna blev varse om att någonting inte stod rätt till vid 8-9 års ålder. Gemensamt för nästan alla som barn var känslorna av skam och kluvenhet över situationen med en mamma eller pappa som missbrukar.I fyra av fallen så fanns det en önskan om att fly eller hålla sig borta, men samtidigt en ambivalens gällande deras frånvaro, tre av dem kunde känna oro för föräldern eller syskon, medan den fjärde kände förväntningar på sig om ansvar i hemmet. Även känslor av ensamhet, utanförskap och dåligt självförtroende var typiska, känslor som kunde styrkas genom tidigare studier och kan eventuellt tolkas ses som representativa hos barn till föräldrar med alkoholmissbruk.

During the middle of the 18th century the development of Toyota Production System, TPS, started in order to streamline the processes. TPS was based on the principles of assembly line production but unlike previous performers Toyota let the manufacturing be constantly affected by demand. At the end of the 18th century TPS was described by Womack and Jones in the book "The machine that changed the world - the story of lean producion" where TPS got the name lean. The principles behind lean is to maximize customer value and eliminate waste which means making products and services more valuable to the customer. 1Lean was for a long time a philosophy and an approach limited to industries and production based companies.

This EEF-project is a part of a larger project at SLU, Division of Reproduction, Dept of Clinical Science, with the intention of developing and evaluating new methods for the assessment of stallion semen quality. Over the last 10 years there has been an increase in the use of artificial insemination with cooled semen in Swedish horse breeding. At the same time, foaling rates have decreased. This has lead to a need for new and better methods of assessing the quality of stallion semen. This EEF-project was based on an objective method to calculate motility, with QualispermTM, in fresh and cooled stallion semen, and after selection. Today sperm motility evaluation is mainly done subjectively by visual assessment with a light microscope, and the correlation between these motility results and fertility have varied.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

In this thesis, two studies with different drills were included. In one of the studies two drills were compared: Väderstad Rapid and Väderstad Spirit. In the other study various drills for direct drilling were compared. The study with Rapid and Spirit was placed in two locations with different autumn tillage; one on ploughed land in Uppsala and one on cultivated land in Västerås, both with relatively high clay content. Rapid drills have a single disc coulter, while the Spirit drills have a double disc coulter. Various aspects were compared such as aggregate distribution, seed placement, emergence, crop yield and economic outcome.

In the end of 1998 the company Holmen Skog AB was certified accordint to the FSC system with an area of 1 036 000 hectare. After that Holmen Skog AB has been working actively with the nature conservation in the forestry. In order to control the quality of the company?s nature conservation in final fellings they started a yearly inventory which is called BAKRUS (Judgement of ecological and culture care in relations to policies for a persevering silviculture). After 1999 the control was expended to include all actions in the forest.

In this study we have explored and investigated how journalist experience the relationship with politicians/press secretaries in the making of political news. The study examines how journalists see the balance of power between them and their political sources in the setting of the news agenda. To do this we have used a qualitative interview analysis. Our theoretical starting points have been based on the social exchange model. The social exchange model has a social psychological and sociological perspective that explains the interaction, social exchange and stability as a process of negotiation exchanges between parties and operators.