Detta är ett examensarbete som genomförts hos Göteborg Energi AB och syftar till att utreda omkryogen uppgradering av biogas med fördel kan ske genom att producera nödvändig kyla medvärmedriven absorptionskylmaskin. Göteborg Energi är en av tre parter som tillsammans ska bygga enbiogasanläggning i Lidköping som ska vara i drift 2010. Anläggningen ska producera 30 GWhflytande biogas per år.Arbetet utreder om det är fördelaktigt ur ekonomiskt, energimässigt och miljömässigt perspektiv attuppgradera biogas med kryogen teknik med värmeproducerad kyla. En jämförelse görs först medkryogen teknik där kylan är producerad med el och sen med andra uppgraderingstekniker. Som stödhar två olika processimuleringsprogram används, Hysys och DESIGN II.Resultatet visar att energianvändningen ökar då värmedriven kyla används i jämförelse med kylaproducerad med el.

Miljöcertifieringssystemen PEFC och FSC ställer krav på uppföljning och revision för att säkerställa att kraven och kvalitén uppnås. Studiens syfte var att belysa de skogliga maskinentreprenörerna och förvaltarnas/virkesinköparnas erfarenheter av arbete med uppföljning inom miljöcertifierat skogsbruk. Materialet insamlades genom telefonintervjuer och analyserades med kvalitativ innehållsanalys, vilket ledde fram till resultatet. Uppföljningen och traktdirektivet har en viktig roll för att nå miljöcertifieringarnas krav. Dialog och delaktighet mellan de olika yrkesgrupperna var viktig, enligt respondenterna, för att miljöcertifieringen ska nå en hög kvalité och för att skapa engagemang och vilja att förbättra arbetet..

SMTP, the current protocol for sending electronic mail (e-mail) over the Internet, has for many years suffered from several problems and limitations. When it was designed, well over twenty years ago, the requirements for e-mail were very different from those of today. A message was a text message in English, and both user and machine were explicitly named in the address. The protocol was not designed to transfer other types of messages, and no mechanism was included to verify the identity of the sender.In order to solve these shortcomings, a new e-mail protocol needs to be defined. This report specifies a basis for what such a protocol may look like.

The tourism industry is growing and with its growth competition between destinations rises. In competition, cooperation and collaboration between tourism operators seem beneficial when creating an attractive and dynamic tourist destination.The purpose of this study is to describe and discuss the significance and influence of tourist related networks at a tourist destination, and therefore this study aims to examine the question: What significance do the tourist related networks have at a tourist destination?This study focuses on seven networks on Gotland that are tourism related, and the representatives of the networks were interviewed in order to get their view on the network and its significance to the destination. The study shows that networks have an important role in creating a unified tourist product of the destination, and in reaching out to the potential visitors through joint destination marketing. The study also shows that the tourism related networks helps to improve the reception of the tourist at a destination and to secure the quality of the tourist destination and its tourist products..

A well known optimization-problem of multiprocessor system is scheduling of tasks. In this paper I use a variant of previous known algoritm, (Fast Critical Path) for scheduling real-time tasks on a multiprocessor system. This is made in a simulation study in MATLAB. The system architecture is assumed to be a MIMD- machine, (Multiple Instruction stream Multiple Data stream) with bus-typologi and message-architecture. Scheduling was made on this system where the number of processors varying from five to ten.

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

Background: It has been shown that EDI can yield positive effects within companies. Which effects are possible for a company to direct assign to the introduction of EDI and is it possible to estimate the total effect.Purpose: The purpose of this study is to estimate and analyze the effects of using EDI in electronic business. We also want to contribute with a model for measure and estimate the effects of EDI.Accomplishment: We have studied literature concering EDI and realized a preliminary studie in form of interviews with experts to establish deeper knowledge of EDI. We have also tried to estimate the effects obtained in companies in three different businesses, power, government and transport industry.Result: To obtain as good effects as possible it is important that the co- oporation is built on trust and engagement. Before implementing the EDI-system a thorough overhaul of the processes in the company should be done, involving both the top managers and the staff.

This examination work is about an marketing investigation of John Deere Moco 730/735 during the season year 2003. Moco 730 has an workingwidth on 3 m, and 735 has one with 3,5 m. The research results of 16 moco 730/735 are from intervju- and questionnaire made of the owners. The results also comes from intervju anwser from dealers which sold this mocos. The examination work shows comments and opinions from the customer after one seasons use. In the end of my examination work are all comments and opinions put together in a marketing analysis called swot-analys in Swedish. The analysis declare that the moco 730/735 is functional and have god quality. The future seems god for this kind of moco. The strength for this moco are god quality and the dealers god service support. The most important weakness about this moco are that the machine came out late on the market, compared to other mocos on the market. I think it´s important the have in mind that the customers are very John Deere faithful and this JD 730/735 is used for only one season..

Det huvudsakliga syftet med denna C-uppsats är att undersöka hur teleoperatörer anpassar sin verksamhet för att bemöta den förändrade användningen av mobiltelefonen. Studien har undersökt hur operatörerna hanterar kunder som vill använda mobila tjänster istället för fasta. Mobiltelefonen används idag av teleoperatörens kunder för mer än bara samtal och textmeddelanden. För att besvara frågeformulering har intervjuer med fem teleoperatörer som tillsammans äger mer än 97 % av den svenska telemarknaden. Intervjuerna visar att teleoperatörer är mycket medvetna om de förändringar som har ägt rum och att de försöker vinna tid för att anpassa sin verksamhet, produkter och tjänster för den nya användningen av mobiltelefonen.

The Swedish consumer electronic industry has recently experienced an increasingly intensive price war. The price war has forced some operators in the business to declare bankruptcy, as the only way to compete has been by driving down prices. A challenge that retail chains in the consumer electronics industry is facing is to increase their margins. If store personnel can success with upselling, the companies will increase their profits. The purpose of this paper is to examine if the sales people in the consumer electronic industry can influence the customer to buy a more expensive product and what the effects the upselling has on the customers' attitudes.

Dione kullager AB is a company in Uppsala, which sell industrialmachinecomponents, transmissionsolutions and provides repair serviceof hydraulic components.When a hydraulic cylinder is about tobe repaired it needs to bedisassembled. Because hydrauliccylinders usually work in dirtyenvironments and are heavilyworn some types of cylinders arealmost impossible to disassemble.Today the disassemble is made by hand,which means extra work for themechanics. In order to facilitate thedismantling of this type of cylindersa machine is to be developed for thispurpose and this is where this thesisbegins.The thesis has been organized in threephases: Literature study in whichfacts and theories are acquired.Concept generation in which differentconcepts, calculations, and solutionswere identified and selected. Thedesign phase where all the differentconcepts of components were assembledand simulated in SolidWorks. Similarstructures have also been studied inorder to identify necessary functions.The thesis resulted in a structurewhich is believed to meet therequirements.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.

The purpose of this paper was to examine social workers' experiences of integration of unaccompanied children. We aimed to study which factors in the individual and the community social workers experience affect the integration and how they, based on their understanding, work to promote integration. The essay has a phenomenological approach and focuses on the social workers' own experiences of the phenomenon. The empirical data was obtained from qualitative interviews conducted with five social workers, all administrators in cases involving unaccompanied children. The result shows that the social workers feel that the desire to integrate is the most important presumption that must be present in the unaccompanied children.