This thesis is a product development project that was performed at Alfa Laval Tumba AB. In the past Alfa Laval have manufactured gas separators for engines where gas flows were cleaned from oil. A new business area for this kind of technology has shown to be the manufacturing industry where oil mist has to be separated from the vented air. Therefore a new and bigger design is needed to be able to handle the greater gas flows. A product like that would be a strong competitor on the market when the maintenance would be low in comparison to today?s equipment.During the project several concept suggestions were developed using customer interviews and research as input.

In order to optimize calf welfare and health it is important to know the behavior of cattle in free ranging conditions. When the cow is about to give birth to a calf she will leave the heard about 12 hours before. It is then rather obvious that isolating the cow about calving time in a single pen is imitating the cows? natural behavior. To save space and minimize building cost it?s common that the farmers build calving pens for four of five cows especially at larger farms.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

Husqvarna is a world leading producer of chainsaws with a well-established brand name. Husqvarna now has an interest in investigating the possibiltiy to expand their production of chains and guide bars to include cutting equipment for timber-harvesters.This project is a technical study which aims to answer questions about cutting equipment for timber-harvesters that have been decided in cooperation with Husqvarna. The questions have mainly been focused on forces, cutting speeds, service and maintenance -as well as general questions regarding the size of the Swedish market.Two methods have been applied to answer the questions. Interviews with retailers of harvesters, producers of harvester heads and harvester drivers.The main findings in this project show that there is a relatively small selection of harvester chains on the Swedish market. In contrast to the selection of harvester chains the selection of guide bars is quite large.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

Today dairy farmers in Sweden are obligated to have lights turned on during night time in addition to the mandatory daylight inlet. This presents a cost for the production but many argue that it can be economically beneficial, especially in loose housing of dairy cows. In loose housing and even more so in herds with automatic milking, well functioning cow traffic during all hours of the day is crucial to optimise production. In order to keep the cow traffic flowing, lights may be an important management tool. It is also perceived among farmers with tied up stall that night light decreases the incidents of cows accidental stepping on their own or neighbours udders.

The energy in laundry rooms, in form heated air, can be utilized with a heat exchanger. A concept and an early prototype of the heat exchanger have already been developed to show that the theory works. This report describes the continued development and construction of the product.A field study was made in order to investigate the environmental usage and establish the product design. The most common washing machine was used as a calculation model, and calculations were also made to estimate the amount of energy in the air. A previous analysis of the existing prototype is also presented in this report, to show the products potential capacity.

Dagens hästägare utfodrar inte sina hästar med enbart grovfoder. Många av dem fodrar stora mängder kraftfoder och en del hoppas att det kommer förbättra hästens prestation. Spannmål har ofta ett förhållandevis högt energiinnehåll och lämpar sig därför i foderstater till hästar som har ett högt energibehov. Utfodring av stora mängder energi kan orsaka problem för hästen, bland annat i form av kolik och många stereotypier som vävning, krubbitning och boxvandring. Eftersom det finns hälsorisker med foderstater med mycket kraftfoder i, är det av intresse att undersöka hur olika kraftfoder påverkar hästens hälsa, ämnesomsättning och prestation men även om det går att ersätta kraftfoder med ett energirikt vallfoder.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

In this study we try to focus on the costs for wear parts on different type of soil tillage machines and at Väderstad Rapid drilling machine. We have studied some of the leading types of cultivators and disk harrows. Among the cultivators we have investigated Väderstad Cultus, Dalbo Dinkomax, Horsch Tiger and Terrano. At disk harrow we have looked at Amazone Catros and Väderstad Carrier. We have made more detailed study on costs for wear parts, working depth, driving speed and diesel consumption.

This master thesis is about the collaboration between the custom dairy heifer grower and thedairy producer.The custom dairy heifer grower is a rather unusual strategy of reproductive management inSweden compared to other countries like U.S. and Denmark where the specialization withindairy production gone much further. In these countries the research also has reached muchfurther within this type of industry. However in Sweden there has been research made in thearea of collaboration, but then only within collaborations in the industries of crop production,dairy production and pork meat.The down going trend of profitability within dairy production together with poor profitabilityin the beef industry could partly remedy if more collaborations around heifer contractingwould arise. But since the industry still is of a rare kind in Sweden the knowledge about howthese types of collaborative arrangements works and their contracts are put together is poor.By that the aim of this master thesis is formulated as follows: "how is usually thecollaborative arrangement between the dairy producer and custom dairy heifer growerdesigned".

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Ever since Lipsky wrote about street-level bureaucrats in 1980 the main belief has been that certain characteristics of their jobs make it exceptionally difficult to severely reduce their discretion. However, discretion comes at a price and if public servants abuse their power the legitimacy of government is at risk and ultimately even the democracy.This thesis address this question by analysing the Swedish employment service which in the beginning of 2001 started a project called ?Af Sverige? trying to improve internal rule of law. By comparing two local and fairly equal jobcentres and how the street-level bureaucrats within use their discretion, I seek to find support for my hypotheses that organizing local jobcentres according to the principles of machine bureaucracy plays a significant part in reducing discretion.My findings show that a jobcentre characterised by strict rules, few units, good communications and a forthright manager who delegates formal power to the employees results in a stricter and more uniform application of regulations among the street-level bureaucrats. My conclusion is therefore unambiguous.

The purpose of this essay, ?Now they are chasing paper-less - A qualitative discourse analysis of mass medias depiction of the Reva-project and the work of the police?, is to analyze how mass media portrays the Reva-project and polices work with the project. The basis for the essay will be eight selected newspapers. The Reva-project implies collaboration between the Police, the Swedish Migration board and the Swedish Prison and Probation Service within the border police. The aim of the project is to enhance the efficiency and the execution of the border police work, in accordance with the government?s target.