Education in Swedish sport is mainly based on traditional learning that requires a lot of time and effort, which could be a barrier for trainers since they report a lack of time as a consequence of their commitment as a leader. The Swedish sports movement has noticed some trends that could be seen as influential on the future directions of sport. One of these trends is a changing way of communication where people today communicate to a greater extent with the use of digital technology. The Swedish sports movement has to relate to this and follow the evolution. The use of e-learning has increased in higher education and organizations over the past decades.

This study is based on an interest in trying to understand what is needed to ensure that students actually learn in a learning object, in this study equations. Algebra is an area of mathematics in several studies proved to be a stumbling block for many students. Using letters in mathematis is difficult for most students according to research reports and it is also consistent with my own experince as a teacher. The purpose of this study was to seek answers to what in the lesson content and also during the interview that allowed the students to learn more about the learning object. Based on students' prior knowledge and the difficulties students might have with the learning object and the offer of learning, I try to get an answer to what might have contribut the students to developed knowledge of the learning object.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

The research in this paper aims to producing a home version machine thatcan dry and make biological waste into compact pellets. This product ismade primarily for those who want to improve the environment and reducethe energy consuming process of separating the biological leftovers fromother waste in the large processing plants and save money due to reducedpickups of waste. Since there is no commercially available product thatdoes what we want to achieve we had to start from the beginning with boththe design and the mechanical aspects. The result is a machine, that fits inour homes, and in an easy and inexpensive way reduces the amount ofbiological waste that needs to be collected by the public wastetransportation system. This is done without reducing any of the energy inthe waste and it can still be used to compost or by large-scale plants that usethe waste to make electricity.

The purpose of this article was to examine how students learn to use the Individual Development Plan (IUP) with written assessments as a tool for learning. The study is conducted according to an ethnographic approach. A total of 20 students, aged 13-14 years, participated. The production of data took place through participating observations, field notes and conversations. A qualitative content analysis was used for data analysis.

Information technology inflicts upon us in our everyday life. It is a natural part of our work and of our spare time. The education system is not excluded from this development, IT is becoming an important part of education at all levels. In university, learning platforms is one of these new ways of using IT in education. Learning platforms becomes a valuable tool for teachers and students.

The purpose of this study is to determine which approach preschool teachers from a Reggio Emilia inspired preschool and a traditional preschool have on children, knowledge, learning and their own role in children?s learning. The two pedagogical approaches have different basic visions; Reggio Emilia follows the thoughts of Lori Malaguzzi and the traditional preschool follows the Swedish curriculum Lpfö 98. The main research questions asked were:What view on children, learning and knowledge does the preschool teacher from a Reggio Emilia inspired preschool have in comparison with a traditional preschool?Which role does the teacher believe that they should take regarding children?s learning?What differences and similarities can be identified in the teachers' perceptions?To carry out this study, I used a qualitative research method.

This thesis work has been performed on request by SWT (Scandinavia WeldTech AB). SWT manufactures, develop and sell ready to assemble building systems for concrete rafter beam applications. The beams in this system consist of a u-beam that is welded to a flange. To be able to fill the beams with concrete there is holes in the beams top end. The holes are made in a ?punching machine?.  These holes are cut out and the remaining steel piece is bent down in the u-beam.

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

The purpose of this study is to examine the importance of a working laboratory in mathematics education, how it influences students? learning and the confidence the teacher has in the laboratory component. Focus has been placed upon the advantages and disadvantages that could follow in the working method.The method used in this essay is qualitative in order to answer all the questions that arise along the way, and in order to use this method in interviews. The interviews that has taken place has been with five class teachers that are currently teaching at a elementary school between the years of 1-5. The purpose of this study has been answered by using its literature and the qualitative method with the class teachers.The results of the research show that teachers express gratitude towards the method in use for mathematics studies.

Encouragement to develope an individual pictorial and figuratve language in combination with theoretical learning simplifies the process of learning.

Vi har valt att testa It?s Learning - ett informationssystem som tillhandahålls studenter vid Karlstads universitet för informationshantering. Från början var det tänkt som ett redskap vid distansutbildningar men det används mer och mer av campuskurser. Men hur användbart är det? Ställer användarna andra krav på ett användbart informationssystem än vad de teoretiska reglerna och normerna säger och på vilket sätt uppfyller It?s Learning de teoretiska respektive de användarbaserade kraven? Det är det vi har försökt ta reda på i denna uppsats.