This study investigated the performance and cost of scarification with a tractormounted excavator. Due to variations in terrain conditions the performance variedbetween 0.08 and 0.11 ha/E15h and, with a machine cost of 366 SEK/h, the cost ofscarification varied between 3 330 and 4 750 SEK/ha..

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

Violence and aggression is a common problem for staff in different care units. Caregivers often feel frustrated and unsatisfied in their work with these patients. Even caregivers with long experience finds it valuable to get education in management of violent patients. The aim of this literature study was to illuminate staffs experience in meeting with aggresive and violent patients. The method that was used was a literature research, where earlier research findings were read, analysed and put together.

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

Violence and aggression is a common problem for staff in different care units. Caregivers often feel frustrated and unsatisfied in their work with these patients. Even caregivers with long experience finds it valuable to get education in management of violent patients. The aim of this literature study was to illuminate staffs experience in meeting with aggresive and violent patients. The method that was used was a literature research, where earlier research findings were read, analysed and put together.

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

The aim of the study was to improve understanding of how upper secondary school acknowledge and adjust support and guidance for gifted students regarding their future academic and professional career. The study examined school pricipals and career counselors approach to guidance work with gifted students and how the above mentioned professionals received information about gifted students. It was further examined what measures were applied to adjust the upper secondary school to the needs of gifted students. Qualitative interviews were conducted and the results showed that in cases where the informants were told it took place in conjunctions with seminars about the class, through grades or through a teacher or the students themselves who contacted the career counselor or principal at the upper secondary school.The giftedness was connected to the school curriculum and various course topics in the secondary programs. School principals viewed the career counselor as an important resource to provide motivational support, individualize and survey future plans.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.

Background: Children frequently exhibit high levels of distress while undergoing routine blood sampling or injections. If the child is not treated with appropriate care, the feelings of distress may increase over time and result in needle-phobia. Objective: The purpose of this study was to describe nurses´ possibilities to relieve distress in children undergoing needle sticks. Method: A systematic literature review was conducted through database search and screening of reference lists. Ten research articles with a quantitative approach were included, coded for quality and then analyzed.

In present-day situation many libraries use detectors so that they can be able to prevent attempts too take out books without registering them. The university library in Jonkoping is one of the libraries that have such a detector. But unfortunately it doesn?t always work correct and can also react on other things a part from books. This is a big problem since the library staff don?t have time to check all signals that comes from detector.

This report will point out the income for a scania plant production farm, this has been estimated through a case study. The outcome of this report will later be used to calculate a reasonable leasehold charge. This case study is solitary based upon this particular studied farm, at this very point, and can therefore not be used as a general guide. The reason why this particular scania plant production farm has been selected, is because the author is born and raised at the farm and has the intention to run the farm in the future. The chosen farm for this report is based in the southwest of scania and cover 300 hectare of plant production. The crop rotation consists of autumn wheat, sugar beats, spring wheat, spring barely, winter rape and fallow. The farm owns all machinery required.

The idea to develop  a platform for a PID-controller came from the need to control the temperature in  an espresso machine in a more exact way than a thermostat could perform. In discussions with Syntronic AB the idea developed into PID-control for industrial use. Syntronic AB suggested that the platform should be based on a commercially available processor module to shorten the development time. The suggestion included the use of the microcomputer Raspberry Pi, which supports USB, HDMI, memory card and Ethernet.The work began with establishing a schedule for the 10 weeks of the projects duration, and after that a system specification listing all functions, implementation and limitations was made. When the foundation of the system specification was done, a preliminary system design took shape.Because of the Raspberry Pi´s lack of Analog-to-Digital converter, a circuit board containing Wheatstone bridges, differential amplifiers and a two channel Analog-to-Digital converter was fabricated.

This essay is divided in several different parts, but all are tied up together by a fact that we want to increase productivity. We hope to do that by programming the PLC and to reach this with a better security for the person how are going to handle the cutting machine under it?s cutting process. We should as well look for some other ways to come up with better instructions and way to work and handle yourself during work. This programming is done in GRAPH7.