The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

This Masters thesis concerns epistemology in Knowledge Organization KO, as a field of study in Library and Information Science LIS. Using a theoretical model by Birger Hjørland and foucauldian discourse analysis as springboards, this study analyses three epistemological discourses in the practice of KO. The aim of the study is to show how these discourses are constituted and demarcated in relation to KO, as well as to examine how they fit into Hjørlands model. A brief historical outline of some epistemological trends in LIS is sketched, as well as examples of how different epistemological schools influence different parts of KO, e.g. information retrieval, indexing- and classification theory.

Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.

This study examines if the prediction of cardiovascular disease in hypertensive patients can be improved upon when renal function and microalbuminuria are added to the classical risk factors The predictive capability of a model is measured by discrimination, calibration, reclassification and Harrell's C.The results are ambigious. In most cases, microalbuminuria should be included in the model, but the results regarding the other measures of renal function are varied. Therefore, the selection of risk factors to include in the model depends on which measure of prediction one prioritizes..

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

AbstractPurpose:The purpose of the study is to describe the internationalization process of one firm when in a country culturally diverse from the firm?s original market.Methodology/approach:The study is a single case study which examines one firm?s internationalization process when entering the Chinese market. The approach has been an empiric interaction between empirical and theoretical data.Findings:The theory of the Uppsala model was applied to the case-company to test the model?s completeness. The authors found weaknesses and added three more aspects to the model.

The retail sector is in a continuous development. What demand looks like and where the consumers want to shop has changed during the last years. Market place, demand, supply, external factors and politics affect how the retail sector develops. To make a market place attractive a variety of factors have to be considered.In Hong Kong a model called Rail & Property is used, this means that the development of the subway is integrated with the development of the city. The model is both successful and economically sustainable.Today the supply of shops and services in Stockholm´s subway stations is rather small.

The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

Examensarbete utfördes på CA-Verken i Sävsjö som bl.a. tillverkar hydraulcylindrar. De senaste två år har CA-Verken haft en kraftig ökning av omsättningen och det som står i vägen för fortsatt expansion är produktionen som har begränsad kapacitet.Målet med detta arbete är att studera CA-Verkens produktionsflöde för att kunna identifiera flaskhalsen/flaskhalsarna och därefter ge förslag på lösningar och förbättringar. Den teorin som har använts som grund till arbetet är Theory of Constraints (TOC). Intervjuer, företagets affärssystem och observationer har använts vid datainsamling.

The investigation was initiated because of the high workload of the sellers and, additionally, because the Tunadal sawmill has received low ratings in customer surveys. Thus,  two main approaches are adopted here,  the first being to investigate which of the three methods  of working, namely, market divided flow organization, function organizationand flow organization with collaboration, proves to be the most beneficial. The second is to investigate whether there is an available method to ease the daily work. A literature review has been made in order to determine more efficient ways for the sellers to work in the Tunadal sawmill. During the investigation, an in-depth investigation into the total quality management using a balanced scorecard as a management tool was conducted.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

Dagens konsumentbeteende online skiljer sig åt från hur det såg ut för bara några år sedan, någotsom kan förklaras av att både e-handel och Internet ständigt utvecklas och vårt köpbeteende ochvåra preferenser tenderar att förändras över tid. Den tekniska utvecklingen gör attkonsumentbeteendet inom e-handel tenderar att växla snabbt vilket gör kontinuerlig analys avkonsumentbeteende till en nyckelfaktor för att lyckas inom e-handel.Studien syftar till att undersöka det något yngre kvinnliga segmentets, i åldern 25-34 år,konsumentbeteende inom e-handel idag. Flow är ett använt begrepp för analys avkonsumentbeteende och har visat sig påverka både attityder och avsikter avsevärt inom virtuellamiljöer som exempelvis e-handel. Flera definitioner på begreppet tyder på en viss komplexitetoch att tillståndet tenderar att förändras och växa i takt med utvecklingen. I studienkonceptualiseras flow i kategorierna koncentration, njutning och förvrängd tidsuppfattning, där viundersöker hur de påverkar webbsajters användarvänlighet och konsumentens upplevdabeteendekontroll, och vi fokuserar på konsumentbeteende online i form av impulsköp och avbrutna köp då vi önskar analysera om beteendena påverkas av ett flow-tillstånd Via en enkätundersökning med kvinnliga studenter från svenska universitet visar våra resultat attflow i form av njutning och förvrängd tidsuppfattning ökar impulsköp, medankoncentrationsnivån inte har någon påverkan på konsumentens impulsivitet.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

The aim of this thesis is to investigate how the literary site Vulkan.se affects the conditions for publishing, distribution, incorporation in value systems and feedback in the literary process, as it appears in Lars Furuland?s model of this process. The purpose is also to propose an updated version of the model. This is achieved through a qualitative testing of Furuland?s theory.