This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

Denna rapport beskriver arbetet med utvecklingen av en ny modell för kaplanturbiner. Utvecklingen bygger på två kopplade differentialekvationer som under arbetets gång anpassats och implementerats i turbinmodellen.Modellen beskriver hur vattenflöde och turbinmoment påverkas av avvikelsen från den optimala kombineringskurvan för vinklarna på turbinens ledskena och löphjul, och är anpassad för ett referensaggregat med tillgängliga provdata. Även övriga enheter i vattenkraftaggregatet modelleras och sätts samman med frekvensregulator och elnät för att simulera aggregatets reglerstabilitet i önätsdrift.Verifieringen av turbinmodellen sker genom försök att återskapa de befintliga verkningsgradskurvorna med hjälp av modellen. Resultatet visar en god följning av de verkliga kurvformerna, dock med något lägre maximal verkningsgrad.Verifieringen av önätmodellen sker genom att prova stabiliteten i nätfrekvens och turbineffekt vid stegpålastningar. Resultatet ger en stabilare reglerstabilitet än i verkligheten, men uppfyller ändå förväntningarna på en fungerande modell.This report describes the development of a new kaplan turbine model.

An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

Resultaten visar på att abnormal earnings model är en mertillförlitlig modell i förhållande till dividend growth model. Dettafrämst då abnormal earnings model grundar sig på mer tillgängliginformation samt att tillväxträntan i dividend growth model harkonstaterats vara orealistiskt hög. Analytikers prognoser tenderaratt vara optimistiska i början av undersökningsperioden 2000-2002. Perioden 2003-2007 präglas mer av pessimistiskavinstprognoser. Marknadens riskpremie fluktuerar mindre underperioden 2005-2007, vilket kan förklaras utav införandet av IFRSår 2005..

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The purpose of this Bachelor thesis in Economics at Lund University is to try to establish the correlation between the value change of retail real estate buildings in Sweden and macro economic variables. The principal method is the multiple regression model and it is used to estimate the basic model. The basic model is enhanced by estimating some 30 models and the result is two good models. The difference between the basic model and the two better models are small but important. In the lagged basic model, the same variables are used as in the basic model but with different time lags.

Lean is a production philosophy which is about increased resource use while meeting customer requirements. The foundation of lean comes from Toyota and their production philosophy The Toyota Way. Professor Jeffrey k. Liker has worked with Toyota's production philosophy and Lean for a long time and has created a 4 P model and 14 principles that characterize the Toyota production system (TPS), which many sources refer to.The aim of my work is to study the working procedure of asphalt projects from sales to the laid asphalt with a focus on planning and production management. The goal is to examine how the lean philosophy can be applied in planning and production to simplify the flow of asphalt projects based on Likers model and principles.

This study reflects on the swedish model and the models future. The swedish modelmeans that legisilation acts with the collective agreements . The wage issue is notregulated by law instead it is managed by the social partners in the form of collectiveagreements. In 2008, a report was presented by the Commission on a joint regulation ofthe minimum wage for all EU countries. The issue has become increasinglycontroversial and was especially disccused for the election of candidates to theEuropean Parlament last spring.

Denna studie belyser hur unga kvinnors attityder och identifikation ser ut till mode- och livsstilsbloggare i Sverige. Bloggar har under det senaste decenniet vuxit och blivit ett stort internetfenomen. Syftet med studien a?r sa?ledes att ta fasta pa? hur bloggla?sarnas blogganva?ndning ser ut samt hur deras fo?rtroende och relation till bloggarna bero?r dem. Detta fo?r att a?ven kunna belysa hur reklamen i bloggarna upplevs av bloggla?sarna.

Accounting has been critized for being one of the leading factors in the latest financial crisis. One of the primary problem areas was identified as delayed recogonition of losses on financial instruments. Consequently, a new impairment model is being developed and is to be namned expected loss model. The difference from the present model, incurred loss model, is that it takes losses into consideration on an much earlier level. Even though the model may be theoretically feasible, in practice it may implicate a number of issues.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.