AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

This paper argues that the food industry in general and the one taking place in Scania in particular, are disregarded in the official management of industrial preservation carried out in Sweden today. Despite the articulated ambition of a cultural heritage that as many as possible could identify with, the practice tend to create an industrial heritage based on stereotype ideas about the landscape in Sweden and the characteristics of industry. The way the open land of Scania differs from the traditional image of the appearance of Sweden, is used as one possible way to explain why the food industries of Scania are overseen in the management of industrial heritage. It is also argued that the high number of female employees might bee a reason why the food industries in general are given low priority in the practice of cultural heritage. By putting the Findus pea industry and the cultivated landscape that provides the factory with primary products against the official criteria for industrial memories, it is examined what values for preservation the food industry contain..

Uppsatsen behandlar ångbåtstrafikens historia på Luleälven, vilken spänner över en tidsrymd på ca 60 år från 1860-talet till tidigt 1920-tal. Syftet är att beskriva och utreda ångbåtstrafiken, samt vad som fanns före respektive efter. Det teoretiska resonemanget diskuterar kring vilka förutsättningar som är nödvändiga för att ett teknikskifte ska kunna ske inom en viss del av transportväsendet. Ångbåtstrafiken kom igång på riktigt när The Gellivara Company vid mitten av 1860-talet skulle bygga kanaler förbi de två stora forsar som fanns på Luleälven och behövde alternativ till de existerande transportalternativen. De tidigare transportalternativen var sommarlandvägar i jämförelsevis dåligt skick och älvbåtar, vilka framfördes med roddkraft.

Industrilandskapet is an area in central Norrköping who has undergone major changes during the 1900s. The area has in recent decades gone from being an important industrial area into a place that today is focused on knowledge production and visit activities. This study focuses on how four selected businesses in Norrköping look at the change that Industrilandskapet has undergone. The four businesses all have in common that they use and care of Industrilandskapet in both marketing and as a working place. The businesses are in this study represented by four informants who were interviewed with semi-structured interviews.The results from the informants are analyzed by support of theoretical points.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

Construction companies are frequently criticized for high prices and long construction time. At the same time, statistics shows that construction workers are on the sick-list for occupational injuries or casualties more than other groups at the labour market.Skanska built a block of flats with tenant-ownerships in Gävle. The construction consists of concrete walls with in-fill walls in the front. The purpose with this degree project is to perform a risk analysis in work environment with focus on repetitive strain injuries and control the time report for in-fill walls manufactured in a field factory. The result of this project will help to make more realistic cost predictions in the future.This degree project has been performed in cooperation with the construction company Skanska.

The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

The objective of this study was to determine the mineral content in ten New Zealand monofloral honeys, in order to distinguish whether New Zealand monofloral honeys are a good source of minerals compared to honeys from other parts of the world. The ten monofloral honeys were collected from a local honey factory (Airborne Honey Ltd, Leeston), Clover, Honeydew, Kamahi, Manuka, Nodding Thistle, Rata, Rewarewa, Tawari, Thyme and Vipers Bugloss honeys were been investigated. The water content, water activity, pH, conductivity, colour and mineral content were evaluated. The water activity was averaged for all the ten New Zealand monofloral honeys and set to 0.59 aw, which indicates a high stability and long shelf life as a food stuff. A strong correlation between total mineral content, pH, conductivity and colour was obtained.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

The main argument of the thesis is that multinational companies (MNCs) can promote democracy through corporate social responsibility (CSR). MNCs hold some prerequisites giving them the means to create positive changes. But they lack one important prerequisite: knowledge about local conditions. Therefore the best CSR result is reached through partnerships with local NGOs.H&M's CSR-work in Bangladesh, including a partnership with the Bangladeshi women's rights organisation Karmojibi Nari, serves as an illustrating case. It is argued that the CSR-work promotes democracy through strengthening the civil society, through indirectly implementing national laws concerning labour legislation and human rights and through raising awareness about rights and legislation among the workers.The CSR process changes the terms for both NGOs and MNCs.

AbstractThis study deals with the tours carried out in the manufacturing sector, at Alfa Laval in Eskilstuna. A large number of visitors, from a variety of backgrounds, go there to see how the manufacturing of separators works. With visitors I refer to the company?s customers, suppliers, students, in- house trainee courses, managers and senior citizens groups.The study examines how these tours can be standardized using spatial design. The result shows the importance of working systematically with visualizing the work as well as the environment for optimizing the visitor's understanding.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

The hypothesis of this study is that the local government act in Sweden 1862 was an instrument for the state to keep its´ political influence on the local level. It did not open for local self-government. The swedish historians Dahlkvist and Strandberg description of the Swedish local government act support this hypothesis, as does the analysis of political scientists Pettersson and Söderlind. The general opinion that the local government act opened for local self-government does still exist among many swedish historians.This study had two aims. The first was to investigate the actual extent of self-government in Borgvik, a small municipality in Sweden during the period 1861-1924.