During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

Vid betongframställning förekommer det spridningar i delmaterialens egenskaper som påverkar den färskaoch hårdnande betongen. Spridningarna i betongens delmaterial har studerats hos tre av Skanskas betongfabriker(Göteborg, Luleå och Norrköping), genom provuttag som analyserats hos Cementa Research.Provuttag har gjorts en gång per månad under ett års tid från fabrikerna. Delmaterialen som har analyseratsär ballast, cement, flytmedel och kalkfiller (endast hos Göteborg och Norrköping). Siktning av ballast0-8 mm har utförts med den traditionella siktningen. För kornstorlekar mindre än 0,25 mm, cement samtkalkfiller har lasersiktning använts.För att få en överskådlig bild över spridningarna hos delmaterialen har en analys utförts som illusteraravvikelserna med exakta siffror.

Distrilux International AB, a company within the Electrolux-group, works among other things with storing of products from other companies in the Electrolux-group. This rapport contains a cost analysis of the two Distrilux warehouses in Motala and Mariestad. The company offers five services in these warehouses, in-loading of products from a local factory and from external factories, storing, out-loading of products to Sweden (domestic) and for export. Since there has been some hesitation of the accuracy of the price-model of today, a master's thesis has been advertised. The purpose of the thesis has been to investigate the agreement of the price-model of today and the apportionment of the costing in warehouses.The main problem is to determine which activities is to be considered important in the price-model.

This thesis has been developed inassociation with Strängbetong AB, Sweden.A few years backCementa AB introduced a new type of cement on the Swedish market: Byggcement,which is a Portland Limestone Cement. This type of cement is better for theenvironment and cheaper than Rapid Hardening Cement which is used today at SträngbetongAB.Strängbetong AB isvery interested in a change of cement in the factory and wants to know what ittakes to make a transition from Rapid Hardening Cement to Byggcement.This final projectaims at investigating how the workability and strength development are affectedby a transition from the existing cement to Byggcement and how we can change theproperties of the concrete by adding different types of superplasticizers. Laboratory and factoryexperiments were made, to investigate the transition..

This thesis has been developed inassociation with Strängbetong AB, Sweden.A few years backCementa AB introduced a new type of cement on the Swedish market: Byggcement,which is a Portland Limestone Cement. This type of cement is better for theenvironment and cheaper than Rapid Hardening Cement which is used today at SträngbetongAB.Strängbetong AB isvery interested in a change of cement in the factory and wants to know what ittakes to make a transition from Rapid Hardening Cement to Byggcement.This final projectaims at investigating how the workability and strength development are affectedby a transition from the existing cement to Byggcement and how we can change theproperties of the concrete by adding different types of superplasticizers. Laboratory and factoryexperiments were made, to investigate the transition..

After being excluded from the Swedish Social Democrat party in 1917, the Revolutionary Socialists founded the Social Democrat Left Party. From this point onwards, the Social Democratic hegemony and dominant position within the Swedish workers movement and political landscape was challenged. This thesis aims to investigate the power struggles between these two parties, the Revolutionary Socialists and the Social Democrats, and their desire to influence control of the unions. Taking cues from earlier research calling for a more localized look at this struggle, this thesis turns to a case study of union matters of the the Factory Workers Union Local 84, at Västerviks Tändsticksfabrik, a match manufacturer and largest employer in the Swedish coastal town of Västervik from 1925 to 1930. Organizational material including meeting protocols, annual reports and member registration lists from the local political parties, cooperative union organizations (VFS) and Local 84 serve as secondary data sources.

I slutet av 1800-talet inträffade en tätortstillväxt, vilket bidrog till ökade krav på en bra kommunikation mellan stad och landsbygd. I de städer som låg i närheten av ett vattendrag uppstod det färjtrafik och därefter byggdes en bro. Jag har undersökt Bergnäsets utveckling, vilket är ett samhälle beläget ca 1 km från staden Luleå, med Lule älv som avskiljande vattendrag. Det var i slutet av 1800-talet som Bergnäset började befolkas i samband med färjtrafiken in till staden. Detta ledde till att näringsidkare och invånare började bosätta sig vid denna del av samhället.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

Coastal sediments are important carbon sinks, storing organic matter and thereby helping to reduce the amount of greenhouse gases in the atmosphere. However, they can also act as carbon sources if the deposited organic matter decomposes rapidly, contributing to increased greenhouse gas emissions and global warming. Rapid decomposition partly depends on the degradability of the material itself. In this literature review, I examine which coastal plant species dominate different locations along the Swedish coast, based on coverage data from the ClimScape project (www.climscape.se). For the most dominant species, I investigated the type of organic matter they may contribute to the sediments and based on those results I qualitatively assessed which sites that may function as carbon sinks or sources.

ABB Capacitors Ludvika started their LEAN-project in november 2010, but still has not the whole factory been introduced to the LEAN-tool called 5S. 5S is only implemented on the ?easiest? work-areas.By implementing 5S, at the workingstation called inburkningen, would make the workstation and the area around it much more structured, clean and systematized. The operators are a little bit skeptical to the work that includes continuous improvement today, because they can not see any progresses. If 5S were implememted the operators would be able to avoid searching for tools because with 5S, each tool will have a specified place at the workstation.5S would simplify the cooperation between the shifts, because 5S includes clear instructions for how the workstations will be cleaned after each shift.This report will include my recommendations, thoughts and opinions regarding however ABB Capacitors Ludvika should implement or not implement the LEAN-tool 5S.

LEXION is the name of the largest series of combines made by the CLAAS factory in Germany. LEXION was introduced on the Swedish market 1996 and was for sale in Sweden from 1997. LMB have sold over 400 LEXION-combines in Sweden. In cooperation with the Swedish general agency we decided to make a market research on the Swedish LEXION-market. The questionnaire was supposed to give answers about capacity and technical equipment. Before I made the questionnaire I studied manuals and combines. I got 81 answers of about 325 questionnaires. That makes 25 % reply frequency.

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

The construction industry is currently receiving much criticism for inefficiency and slow development while demands for reduced built in moisture and efficiency increases. This report examines whether the use of field factories can meet these requirements and what factors that will be critical for future use of field factories. Industrialized construction with field factory is compared with traditional loose timber construction and industrial construction in the fields of execution, logistics and working environment. The aim of this report is to provide a basis for field factories current and future use and development. To achieve the aim of the report, people with experience in the use of the various methods was interviewed and literature studies in the various fields done.