Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

Miljöfrågor är i dagsläget ett ämne som intresserar och engagerar mångamänniskor på olika plan och inom olika ämnesområden. Kraven från vår regeringoch från EU blir allt stramare och inom området byggteknik finns idag krav på enbyggnads specifika energianvändning vid nybyggnation. Problemet är att det intefinns något specifikt krav på det befintliga beståndet och dessa byggnader har oftahög energiförbrukning. Möjligheten att det inom en snar framtid kommer kommakrav på det befintliga beståndet, likt det som finns för nybyggnation, är inteorimligt. Det är därför viktigt att redan nu se på vilka åtgärder det finns att vidtaför att sänka energiförbrukningen hos äldre byggnader och som riktlinje strävaefter att nå det krav som ställs på nybyggnation.Det finns många möjligheter och tillvägagångssätt till att energieffektivisera detäldre beståndet av bostäder.

This report brings up the question - ?Is BIM profitable when planning a single-family home??.The methodology for finding the answer to this question is firstly to state the definitions of BIMand the company that is projecting by using the BIM-model. The answer is then obtained byanalyses of the factors of profitability with respect to: time, opportunity of revision, problemvisualization, preference adjustments and energy. A BIM-model has been made simultaneously asthe writing has proceeded to get a perception of how a BIM-model really matters for the analysis.The analysis shows that the answer for the question depends on further factors. The factors thatare mostly discussed are the company?s intentions and the complexity of the house.

The main reason for doing this kind ofproject was to find out if it was possible to make a relatively advanced application with user friendly tools. We tested the software MIT App Inventor, and the ability to create a useful application for people who wants to get an overview of their energy intake.During the process we found out that it was possible, but minor setbacks occurred. The main idea of our vision; to make a calculator and a registry with different kinds of food and their amount of calories, was completed quite easily. Later on, design alternatives and more advanced functions were not possible for us to make.This might have been because of the short amount of time the project was given, but also, and more likely, because the software did not contain that kind of advanced functions. Even if there were factors that held creativity back, the basic idea was possible to form..

This thesis was commissioned by Tekniska verken, Energy Division with the overall aim to investigate the concept of environmental debt and what it means for a business. Furthermore, a sustainable risk and responsibility investigation shall be carried out on the concerned areas. Finally, the priority areas shall be highlighted and proposed actions presented. The Swedish Environmental debt concept was presented in 1992 by Arne Jarnelöv. Environmental debt is defined as restoration costs for environmental damage. In the early days the concept did not take into account who was responsible, but the environmental debts was regarded as a humanity debt to future generations.

Textilindustrin står inför stora utmaningar när det kommer till forskning, utveckling ochproduktion på ett miljöanpassat och socialt ansvarsfullt sätt. Ökat miljömedvetetande hoskonsumenten har lett till ökat intresse och möjlighet för företaget att arbeta mot ett hållbartföretagande.Examensarbetet är skrivet som en del av kandidatexamen i textilingenjörsprogrammet föruppdragsföretaget BlåKläder AB och utfördes för att även kunna fungera som ett underlag förandra företag i avsikt med att påbörja/utveckla sitt arbete med socialt ansvarstagande.I arbetet presenteras miljöpåverkan av en arbetsbyxa i bomull från råväv till distribuering.Fyra miljöbelastande kategorier har tagits med i undersökningen, där mängden av kemikalie,vatten- och energiåtgång samt koldioxidutsläpp räknades ut per arbetsbyxa av minimumorder. Sammanställning av resultat visar att det används 2,5 kg kemikalier, 10,3 liter vatten,756 Wh energi och det släpps ut 0,4 kg kodoxid vid tillverkning av en arbetsbyxa.Rapporten behandlar och beskriver produktion av en rå bomullsväv medflamskyddsbehandling. Processflödet för hela behandlingsförloppet analyseras i arbetet därbåde kemikalier, energi- och vattenåtgång tas upp vid varje delprocess. Koldioxidutsläppanalyseras som en särskild del av rapporten och omfattar de direkta utsläppen av tung lastbiloch fraktfärja.

This thesis deals with the possibilities of installing solar panels on a property, the building is owned by Kornhillschurch and called Kornhill. The owners of the property wanted to learn more about potentials for installation of solar panels on the property, therefore we described different types of solar cells and solar cells essential function to generate electricity in the report. Different factors that are limiting the generated energy are mentioned.An investigation of the property?s potential has been made in order to consider different designs. When sites that were considered suitable for solar cells were selected, different design options were made, one for each site.

During the 19-century a global warming has been observed, which includes increases in global air and ocean temperatures, widespread melting of ice and snow, and rising global sea level. There is a clear connection between emissions of greenhouse gases caused by the human and the increase in temperature. Climatic changes caused by global warming can be stopped trough decreased emission of fossil fuels, for example by an increased use of biogas. Biogas is a renewable energy source which is produced through anaerobic (oxygen free) digestion of organic material. The gas is a mixture of methane (CH4) and carbon dioxide (CO2) and can be among others used as fuel in vehicles.

The corn plant came to Europe with Christopher Columbus in the 14th century and have ever since bin cropped here, but corn haven?t bin very common in Scandinavia until recently. The mainly use for this crop silage but even corn for grain is cropped in Europe. Corn for grain is a common part of feed in beef and chicken farming. In Sweden corn for grain is pretty rare but almost 1000 hectares are used for this crop, Lantmännen Sverige is the biggest buyer of corn at the moment.

The purpose with this literature study was to investigate the possibilities for improvement of forage protein in dairy cows with focus on feeding strategies and conservation of forage protein. The utilization of forage protein in dairy cows is often not that efficient as it could be. The feed crude protein consists of both true proteins and non protein nitrogen. The digestion of proteins in the rumen depends on the protein degradation rate and the ability of the microbes to synthesize microbial protein. The microbes need a balance between carbohydrates that provide them with energy and proteins that are degradable in the rumen.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

The demand for renewable energy is increasing in Sweden. This consequently increases the pressure for and willingness to pay for forest fuels. One method to extract forest fuel from suitable commercial thinnings is the "long top method? (LT-method). With this method saw logs and non-delimbed tops are recovered, i.e.

I Sverige står byggnader för nästan 40 procent av den totala energiförbrukningen och energibesparingspotentialen är enorm. Samtidigt dyker det upp mängder med aktörer som vill hjälpa fastighetsägare att energieffektivisera och allt fler energitjänster introduceras till marknaden. Möjligheterna för ett samarbete mellan fastighetsbolag och företag som erbjuder energitjänster har aldrig varit större, och en av dessa aktörer är energibolagen. Konkurrensen är dock hård och för att säkerställa sin konkurrenskraft på marknaden krävs effektiva samarbeten, där kundnöjdhet är i fokus, vilket i sin tur ökar behovet av kundkännedom hos energibolagen.Syftet med denna studie är att hjälpa energibolaget Elkraft Sverige att förstå olika fastighetsbolags energisituation och behov av energitjänster, samt rekommendera hur de bör utveckla sitt energitjänsteerbjudande för att kunna bistå dessa kunder på bästa sätt i framtiden.Detta gjordes genom att olika typer av svenska fastighetsbolag kartlades och analyserades med avseende på deras energisituation, beslutsfattande gällande energifrågor samt behov av energitjänster. För att samla in data genomfördes först en litteraturstudie, sedan semi-strukturerade intervjuer med högt uppsatta beslutsfattare samt en enkätundersökning.Slutsatsen blev att Elkraft Sverige bör finslipa sina befintliga energitjänster och komplettera sitt begränsade erbjudande genom att ingå externa allianser med kompetenta aktörer.

Sverige ska år 2020 ha en energiförsörjning bestående av 50 % förnybara energikällor. Den viktigaste källan till förnybar energi är solen. Solel är dock en dyr investering idag och gällande regelverk försvårar möjligheterna till att tillgodoräkna sig egenproducerad el.Byggföretaget JM bygger redan hus med låg energianvändning. Ett sätt att bidra till ett förnybart energianvändande är att installera system som producerar egen el till husen. Detta arbete har genomförts för att undersöka om solel kan komma att bli en konkurrenskraftig produkt att erbjuda JM:s husköpare.

The purpose of this paper is to identify the current status of fuel cell technology and to establish whether said technology is mature enough to be implemented into the Swedish Armed Forces. The question to be answered in this paper is as follows: Can hydrogen gas and fuel cells be used as an alternative source of energy within the Swedish Armed Forces?This paper is based on theoretical studies and reports from prior research done on fuel cells. By studying these facts a predictive answer has been obtained. The answer I have come to, is that the maturity of fuel cell technology is currently inadequate for the Swedish Armed Forces to implement, especially considering its harsh working conditions..