As a part of the fight against the global warming the energy production needs to be more efficient and redirected towards sustainable options. One alternative is cogeneration, which means that electricity and heat is produced in one plant. The purpose with this survey is to examine if there are any commercial available combined heat and power techniques, based on combustion of solid moist biomass, which are suitable to small-scale applications. The technique must be able to produce between 2 and 10 MW thermal and the heat demand is a Swedish district-heating system. When already published reports had been studied, the Organic Rankine Cycle (ORC) was chosen as the most suitable technique.

The aiming with this project is to find out if a small scale chicken production can be profitable, from day-old chicks to a processed smoked product out to stores and consumers. The products will not be available in the stores all the time because we will give the customers quality rather than quantity, so when the product can?t be found in the stores the customers will ask for it. The conclusion I found out is that it might be hard to raise chickens in these scale from an economic point of view the costs for transport, logistics, slaughter and marketing are to high..

Abstrakt För att utveckla och förändra spelmediet behandlar detta arbete impressionism och digitala spel. Båda ämnena diskuteras och belyses från olika vinklar för att undersöka hur de två ämnena kan sammanföras i en spelproduktion. Spelproduktionen har testats av spelstudenter för att få deras åsikter om hur spelet fungerar och deras syn på kopplingen mellan impressionism och digitala spel. Arbetet avslutas med en diskussion och slutsats där alla fakta som tagits in under kandidat-arbetet analyserats. I diskussionen lyfts följande ämnen fram: impressionism, konst, hur spelmediet ser ut idag, tv- och dataspelsgestaltning, interaktion och hur dessa två ämnen, impressionism och digitala spel kan föras samman.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

AbstractWe have been honored to work with a company called Frimeko AB. Frimeko is located in Halmstad where they make and sell furniture for school and office environment. Our task is to construct a new, more modern sewing machine table for schools. The task is to use the same function as before, ease the storage and production of sewing machine.Efforts to develop the new sewing machine table resulted in that we came up with an innovative design that the company is pleased with.During this project the group has used the method from ?Fredy Olsson Konstruktion? .

Materialhantering är den del av produktionslogistiken som hanterar det interna materialflödet, vilket innefattar intern lagerhållning och transport. Målet med den interna materialhanteringen är att säkerställa tillgången av material till produktionssystemet där hanteringen ska ske utan skador på material eller personal. I ett tillverkande företag kan en betydande del av den totala produktionskostnaden härledas till den interna materialhanteringen. Enligt Lean Production ska både transport och lagerhållning betraktas som slöseri. Det är därmed viktigt att effektivisera den interna materialhanteringen samtidigt som det inte får ske på bekostnad av sämre leveransprecision till produktionssystemet eller säkerheten.

Animal welfare is of increasing concern in present society. In commercial pig farming, animal welfare problems are common. One of the causes for these problems is the barren environment in which pigs are housed, which can cause oral manipulation of pen mates. Providing straw might be one solution to this problem. Another solution could be reached through genetic selection.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Åfors glasswork was a company which started in 1876 and closed in 2012 due to the bad economical situation in the company. After its closure, the glasswork left behind contaminated soil with different concentrations of heavy metals such as, arsenic from arsenic trioxide, a chemical used to remove bubbles during the melting of glass, and lead oxide, a chemical used in the production of crystal glass. Crystal glass?s production occurred under 1921-1971, but emissions of lead into the air from Åfors glasswork continued until 2011, because of the artist Bertil Valliens? artglas was made in Åfors glasswork from 1970?s and onwards.The aim of this study was to estimate how much lead (Pb) and arsenic (As) that were released by Åfors Glasswork into the atmosphere during the operational period of the glasswork in comparison with how much of lead and arsenic were purchased for the company. Added to the assistance of the data from National Archives the variations in the activities of Åfors glasswork could be shown.

The purpose of this project has been to cut production costs for the fascia panels ofGetinge?s largest autoclaves. The cost for the stainless steel plates currently used is veryhigh. An alternative material solution could cut costs significantly.In addition, improvements have been made to the instrument tower which is a central partof the fascia panel. As a result of the new modular design in a new material theinstrument tower has been improved in several aspects..

This paper focuses on the role freedom plays in Michel Foucault?s analyze of liberal and particularely neoliberal governmentalities. From his perspective, neoliberalism operates through the strategic production of entrepreneural subjectivity and distribution of self-governing. Here autonomy is central for governing, which raises questions about what freedom can mean at all in Foucault, and how resistance can be possible. Through Foucault?s thinking on liberal freedom, we can gain a better understanding of his philosophy on subjectivation and resistance..

Since prehistoric time man has used wood to build their environment. The material?s availabilitycombined with its good mechanical properties has often made it the material of choice. Like allmaterials exposed to natures degradative processes the properties of wood decreases over time.Rot, UV radiation and attacks by insects and pests damage wood if not protected. Since we wantwhat we build to consist, optimizing our building materials durability is of great interest.Techniques and methods for increasing the endurance of wood have been developed in severaldifferent places and for a long time.

Uppgiften som låg till grund för denna uppsats, var att ge förslag på produktivitetshöjande åtgärder på Electrolux Distriparts godsmottagning. Vår avsikt var att tillämpa delar av Toyotas produktionssystem på den befintliga processen. Detta resulterade i en serie förslag som, om de tillämpas, drastiskt kommer höja produktiviteten i den aktuella processen..

Denmark, Germany and Sweden are along with 24 other countries members of the European Union. Being part of the European Union also means being part of a European market. Within the union barriers for trade has been abolished in order to create more open market. This open market has also contributed towards a more globalized market for dairy products. What used to be a domestic market has become globalised with increasing trade among the members.