Ocean Thermal Energy Conversion (OTEC) is a technology that utilizes the temperaturedifference in oceans between the warm surface water and the cold water at 1000 m depthto produce electricity. The purpose of this report is to investigate if OTEC with its synergiescould become a commercially feasible energy solution for a small island. A literature reviewis conducted to explore the different OTEC technologies and to what extent the threesynergies; fresh water, air conditioning and aquaculture, could be used. In order to calculatethe profitability of these synergies there is also a study conducted on the conventionalmethods and cost of fresh water production, aquaculture and air conditioning. A model is setup using a scenario of a small tropical Island with population of 100 000 people.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Den ökade förändringstakten i samhället på grund av ny teknik, internationalisering och att samhället blivit alltmer mångkulturellt bidrar till att större krav ställs på företag att hela tiden förbättra sin verksamhet. Akzo Nobel Surface Chemistry, Production Surfactants i Stenungsund, har huvudsakligen sina kunder och konkurrenter runt om i Europa. Då Sverige ligger i utkanten av detta område tar det omkring en leveransdag längre tid för Production Surfactants att leverera sina produkter i jämförelse med företagets konkurrenter. Detta medför att Production Surfactants behöver kompensera denna längre leveranstid genom exempelvis högre produktkvalitet, större flexibilitet eller lägre priser för att ha möjlighet att tävla på marknaden. För att uppnå detta behöver Production Surfactants utveckla och systematisera sitt förbättringsarbete.

PURPOSE: By analysing collected data using theory, we aim to interpret the design, implementation and the usage of BSC in NPO?s to be able to contribute to the research. METHODOLOGY: A case study design has been made through semi-structured interviews and backed up by a quantitative survey and internal documents. THEORETICAL PERSPECTIVES: Based on the sources given from the creators of the scorecard together with some sceptics and some followers, we have outlined the bases of balanced scorecard. To map out the non-profit sector and its strategic needs, the theories have tried to settle the specific need for the strategic tool given.

Lean has been studied intensely since the 1980s and it has been tested and successfully implemented in a wide variety of businesses. This thesis aims to examine the potential effects of a Lean implementation on meeting efficiency, a topic that has gotten little attention in the research community. First, a number of meeting problems are introduced, as they are perceived from the company that is the subject of the study. Second, the potential of introducing Lean in a meeting process is evaluated using the Lean Thinking principles. Third, the wastes that are generated from the meeting problems are identified.

Relationships and trust between humans create the psychosocial working environment. This is a basic human activity and is communicated in a continually ongoing process. Conciseness about the value of trust and social capital motivates the need for work, with threats to communication, being conflicts and noise. This can create greater trust in the workplace as a whole, as well in the working team. Scientists are increasingly interested in these social relations in the working environment; there are profits, both for production and in terms of individuals2019 well being, in shifting the focus away from a purely production-oriented, economic perspective.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

Groups that are often referred to as being dismissed in society in general is by some aspects also considered being so in political arenas. A recent compilation of existing research over structurally based objections of gaining power and positions within Swedish parliamentary politics highlight a lack of research considering whether sexual orientation could be such a discriminatory basis. Using a queer theoretical approach, and drawing on concepts such as heteronormativity and homophobia, the principal aim of this essay is to illuminate aspects of local parliamentary political areas where discrimination on the grounds of sexual orientation become relevant. In order to do so six in-depth interviews with homosexual politicians have been conducted. Finding a queer potential in certain ideological parliamentary political environments that enable homosexual politicians to be open about their sexual orientation, it still relies upon the individual to be confident enough not to interpret the political context as homophobic and heteronormative..

Until 2020, 49% of Sweden's use of energy must derive from renewable sources. Greenhouse gases must as well decline with 40% compared to 1990 as a part of Sweden's 16 environmental objectives. Biogas is part of the effort to achieve these objectives, but as the demand for biogas increases, more substrates are needed to meet the demand. The purpose is to investigate the conditions for pea residue as substrate by performing lab-scale mesophilic digestion with different fractions and notch lengths and then to summarize pea residue as a substrate for biogas production. During anaerobic digestion, 1000 ml bottles were used as reactors for digestion.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Energy Director is a control and measuring system for energy consumption and is part of the product portfolio of E.ON AG for more efficient use of energy, offered to business customers. As of today, the system has only one parameter of control, namely power, and the objective of this essay has been to investigate whether other ones could be added. The emphasis is on the environmental perspective, which is why carbon dioxide has served as an example for this parameter in question.Parallel with the study of Energy Director electricity on the margin, calculations of carbon dioxide equivalents and also the Swedish trade of electricity have all been highlighted. Results indicate that when reductions in energy are made it is endorsed to omit from electricity on the margin rather than some mean distributed electricity, under certain conditions, and in addition the calculations of the reductions should be modified regarding the efficiency of the power stations fuelled by lignite and bituminous coal. Sweden practices trade with the Nordic countries as well as Poland and Germany.

Background: Municipalities are organizations facing a turbulent environment characterized by social, economical and political changes. It is the responsibility of the topleaders of the municipality (the municipal manager and the chairman of the local government board) to manage the situation and to make sure that the organization continuously develops. Purpose: To explain, from a leadership perspective, how the municipal topleaders'duties have developed during the past 25 years. Results: The municipal topleaders have nowadays got more issues to handle. Cooperation, networks and projects have increased, like international issues.

Abstract?Political participation by the citizen?- Citizen proposals in Karlstad municipalityEssay in Political Science, C-levelAuthor: Tobias GustafssonTutor: Michele MichelettiIn Sweden the political parties are losing more and more of their members. That in combination with a tendency that the participation in the elections is getting lower is a problem for the representative and parliamentary political system in Sweden.In order to strengthen the democracy in Sweden and to make the gap between the citizens and the elected smaller there has been some democracy-projects. The purpose of these democracy-projects is to make the political participation by the citizens, between the elections, higher. One of them is ?citizen proposals to the municipality?.The purpose of this essay is to examine this democracy-project in order to see what influences it might have on the local democracy.

The quantity of methane emissions from sheep depend on several factors, for example, the composition of the diet, feed quality, the age of the animals, time of the day and maybe also breed and sex. A comprising literature review was made about which factors that affect the size of emissions. In addition, a questionnaire was sent to two farms, one with a more intensive production system and another with a more extensive system. Inventories of the two farms were made; the rest of the data needed to conduct the study was taken from literature and other sources. Meat produced at the more intensive farm caused emissions of 0.4 kg of methane per kg of bone free meat and the more extensive farm caused emissions of 0.9 kg methane per kg of bone free meat.