The comprehensive purpose of this Master of Science thesis is to examine which fleetmanagement services for engineering vehicles, ?Fleetech? preferablyought to develop inorder to reach a broad market and meet the demands of contractors.Scanty explained, fleet management is the management of a company's vehicle fleet and theservices can include a range of functions such as driver management and fuel management. Inshort the thesis encompasses four sections:1.Survey of the general contractor industry: The survey has been preformed toevaluate the potential size of the market for fleet management services in the generalcontractor industry.2.Needs analysis: The needs analysis aim was to define what contractors tasks andgoals are, and to determine what functions they want and need from a system.3.The use of CAN and the technical premises: The prerequisite for developing asophisticated and generic system is that vehicle data can be accessed from the CANbuss.The use of CAN standards in construction equipment has therefore beenexamined.4.Specification: An explicit set of requirements have been set to be satisfied by a fuelmanagement service, based on CAN standard protocol J1939.Important conclusions: The use of CAN protocol standards are extensive and the prerequisitesfor developing elementary and CAN based services good. The services should be compatiblewith different manufacture?smachines.

Two of Swedens´s major banks, SEB and Handelsbanken, which appears in the same industry and have similar strategy. Both banks can achieve a similar result despite the fact that their reward system looks quite different. An issue that arises from this observation is the relative reward system to the rest of the economy control system.Our purpose of this paper is therefore to examine the reward system in the organization's financial management systems. We wonder if the reward system may be a function of economic control system, or part of the system, or perhaps made independent of the system and then gradually adapted?In our study, we choose to assume a reward system has three functions to manage, motivate and compose the employee group.

Application Lifecycle Management (ALM) is a genre of computerized systems which allows system development corporations to efficiently and more easily manage, maintain and handle the applications lifecycle. These ALM systems have a wide variety of tools which can be integrated to enable and support collaborative work, while they act at the core of the organisation. Todays ALM systems support flexible system development methods throughout the entire development process. This paper focuses on a case-study of a Swedish business- and technology corporation and their use of two ALM systems with an aim to unravel the differences between these systems and their functionality to serve as a basis for decision making regarding their utilization of best practice with their ALM-Systems. Meanwhile we studied their approach to ALM systems to see if they were using them according to the initial idea of ALM systems.

This examination paper is a lead in the educational program Industrial Management at Jönköping University. The paper itself contains an analysis of the warehouse organisation and its efficiency at the furniture company Voice AB in Torsvik, just south of Jönköping, Sweden. The report also contains propositions to raise the level of efficiency in the company warehouse and warehouse management.In the investigation of the warehouse a number of possible improvements were found. Examples are lack of a system for labelling shelves and racks, lack of an efficient location system and development possibilities in work routines. For the empirical investigation both qualitative and quantitative methods ware used.

The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power flows and controls the desired power flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power flow, especially between the northern substations through an improved load distribution.

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

The safety and safety work on OKG, Oskarshamns Kraftgrupp, is supervised by SKI, Swedish nuclear power inspectorate. The task of SKI is to inspect that the nuclear power plants of Sweden runs in a safe way. The proprietor of the permit who runs nuclear power plants has the responsibility to maintain the required safety to run a plant. SKI publishes a number of statue books that OKG has to meet to be able to run the plants. SKI recommends in SKIFS 2 004:1, that OKG work with the safety requirements of IAEA.

Företag befinner sig i en konkurrenskraftig värld och för att lyckas överleva måste de ta handom sina befintliga kunder såväl som attrahera nya. Med hjälp av dagens teknologi, har företagmöjlighet att lagra information om sina kunder och kan därför få en ökad förståelse förkunders beteende och önskemål. CRM-system (Customer Relationship Management-system)är ett hjälpmedel i detta arbete och har därför blivit en prioriterad investering för företag dåkunder betraktas som dess viktigaste tillgång. CRM-system är en kostsam investering,samtidigt som chansen för att misslyckas vid implementering är stor. Därför är det av stor viktför företag att efter implementeringen kunna hantera, använda och ha förståelse för CRMsystemetsolika funktioner för att lyckas stärka kundrelationer och erhålla tänkta fördelar somsystemet syftar till.Studien tillämpar kvalitativa undersökningstekniker där ett fallföretag har undersökts genomintervjuer.

The objective of this thesis was to get more knowledge about how to design a dairy farm reducing the working hours and the work tasks whit high work load. I will try to reduce the working hours and the tasks whit high work load on my own farm witch I am about inherit. Today, the old stanchion barn has room for about 60 cows and 74 young cattle and need two men to run it every day. The total acre is 188 hectare, 100 hectare forest, 65 hectare farmlands and 23 hectare natural pasture. I have studied two solutions. In the first solution, I will use my old barn for young cattle and build a new barn for the cows.

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

The ISO 9000-series is a set of quality standards created by the International Organization for Standardization. The series is intended to provide guidance to companies in the process of deploying an effective quality management system. The series includes the requirements standard ISO 9001. This standard contains requirements on how a quality management system should be designed and how companies generally must work with quality issues. When a quality management system is introduced, if wanted, a quality certification can be implemented.

This thesis investigates management accounting systems in a Swedish health care environment. Through a qualitative case study of an activity-based cost accounting system that was introduced in 1994 at S:t Görans Sjukhus, a large Stockholm hospital, the following questions are addressed: What benefits can an activity-based cost accounting system offer the Swedish health care providers? What are the potential problems impeding the implementation of such a system? Main findings: an activity-based cost accounting system can improve the understanding of where costs are generated in the production processes. Comparisons between alternative production processes are improved, and the data may serve as a basis for internal pricing measures. Concerning the second question, difficulty in reconciliating the principles of economic control with the culture present in a hospital is identified as the main obstacle to a new management accounting system..

In order to survive constant economic, environmental and political challenges, it has appeared to become increasingly important for a firm to recognize the significance of corporate governance. In this thesis, the structure of the board at Smartner Ltd will be outlined and the relationship between the board members and the CEO will be clarified. In addition, the aim is to analyze the corporate governance system at Smartner Ltd to be able to outline and clarify the distinct relationship between the CEO and board of directors..

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.