In modern industrial robots the components in the transmission contain nonlinearities. These nonlinearities need to be to estimated either for better control or to use the parameters for diagnosis of the system. There is a lot of work done within system identification and mainly within the field of iterative parameter estimation.This thesis considers recursive grey-box identification for a nonlinear model of the transmission in an industrial robot. The nonlinearities that are identified are friction, spring stiffnes, hysteresis and backlash. These nonlinearities are a part of the models that are presented in this thesis.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

The purpose with this paper is that trough a description of the management control at Jitech AB find out if traditional management control have been abandoned for benefit for modern management control and in which extent the transition have happened. Further is the second purpose with this paper to find out which decisions that lies behind the design of the management control and how these are in opposition to with the theory..

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The aim of this thesis is to examine how salesperson control can be exercised in a retail store environment. A case study has been performed on a Swedish fashion company emphasizing the relationship between the company?s upper level management and their retail store operations in order to describe, analyze and classify the prevailing management control mechanisms. The paper presents an agency theoretical approach to the relationship applying behavior- and outcome based control theory, performance measurement theory and incentives theory in order to give a comprehensive image of the control system. The main finding is that the company?s management control system as applied to the sales force in its retail stores can be categorized as mainly behavior-based despite several explicit outcome-based features..

Problem: What are the characteristics of Polykemi?s management control system and how is it affected by growth? Purpose: To describe and analyse the management control system of a medium-sized family-owned company from the perspective of Simons? Levers of control. Research design: An abductive, interview-based case study of Polykemi AB. Conclusion: Polykemi?s management control system is primarily a traditional one which is rather strong in terms of Levers of control.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

This study aims to examine the effect management control systems have on which goals health centers prioritize. The management control systems of one privately owned and one publicly owned health center have been studied through a qualitative case study. Robert Simons (1995) framework with four levers of control (diagnostic control systems, interactive control systems, belief systems and boundary systems) has been used to structure the study. For both health centers we found a conflict of interest mainly between the diagnostic control system and the beliefs system, where the diagnostic control system is biased towards quantitative goals and the beliefs system is mainly biased towards qualitative goals. However, despite the unbalanced levers of control the studied health centers have been able to reach a well functioning compromise between quantitative and qualitative goals..

Locus of control och självkänslaEn jämförelse mellan elit- och icke elitidrottareHelén BlomstrandBesitter individen en hög inre locus of control anser denne attindividen själv är ansvarig för valen denne gör i livet, medan en högyttre locus of control innebär det motsatta. Syftet med studien varbland annat att se om elit- och icke elitidrottare skiljde sig gällandelocus of control; får elitidrottarna högre förvärvade än traitbaseradeinre attityder gällande självkänsla och locus of control, än ickeelitidrottare, har locus of control samband med självkänsla. Enenkätundersökning genomfördes på 82 idrottare varav 42elitidrottare. Resultatet visade att elitidrottarna uppvisade signifikanthögre resultat gällande inre locus of control än icke elitidrottarnasamt att det fanns könsskillnader då männen uppvisade högre värdengällande en inre work locus of control. Resultatet indikerar även attbassjälvkänsla har ett positivt samband med locus of control.Diskussionen fördes kring om en högre inre locus of control ledertill bättre idrottsliga resultat samt kritisk granskning av gällandeuppsats.Keywords: locus of control, external and internal, athletes, self-esteem.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The goal of this paper is to examine whether the introduction of a qualifying day in the use of sick insurance in the Swedish welfare system resulted in an increase in the use of parental benefits as substitute to avoid the qualifying day. We believe that this could be the case because of the higher gain from the welfare system. We use OLS to perform a linear regression from a data set from the data base LINDA during 1991-1996. The results in this paper are that there is a significant increase in the parental benefit after the reform although there is a negative trend for parental benefit during the examined period..

The purpose of this thesis is to find means of control that secure cost efficiency regarding the accommodation for the employees on missions abroad of the Swedish Ministry for Foreign Affairs. Today the ministry?s cost for the employees? rented housing is 100 million SEK and there is a need of improvement in the control of these costs. A work method for organizational development will be used in order to reach the findings presented in the thesis. First we study the strengths and weaknesses in today?s control system.

The purpose of this study was to examine if there was a relation between birth order, gender and locus of control. There where 162 participants in the study, 44 men, 115 women. Birth order was coded into three levels. There where no significant differences between birth order and locus of control. The result showed that female participants where more external when it came to locus of control.

I denna studie har undersökts personlighet och Health Locus of Control hos 56 kvinnor och män i åldrarna 18 till 65 år, där 30 var svenskar och 26 var tyskar. Undersökningens frågeställning var: Är en eller fler personlighetsdimensioner i Fem-Faktor-modellen relaterade till i vilken utsträckning en individ har Internality, Powerful others eller Chance Health Locus of Control. En NEO-PI enkät och ett Multi dimensionella Health Locus of Control-skalan-formulär administrerades. Resultatet från undersökningen kunde påvisa en signifikant korrelation mellan Openess to Experience och Powerful Others Health Locus of Control samt Conscientiousness och Powerful Others Health Locus of Control. En signifikant skillnad mellan svenskar och tyskar beträffande Powerful Others kunde också påvisas.

The use of temporary workers gives companies the opportunity to be flexible, by avoiding hiring and dismissing workers because of economic conditions and trends in demand. The management control in use at the company has the purpose of influencing employees? behaviour to act in the company?s best interest and towards its goals. The management control should also influence the behaviour of the temporary worker. The companies have to create motivation and commitment among the temporary workers although they are employed by a staffing agency.