AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

För att skapa kraftfullare presentationer måste nya metoder implementeras för att visualisera projekt. Ett aktivitetshus för ungdomar visualiseras i detta projekt genom att 3D-modellen av huset placeras i ett filmklipp från den plats där huset skall stå. Stegen som togs för att realisera detta var förarbete i form av inskaffande av ritningar, filmande, matchmoving, 3D-modellering, rendering, compositing och ljuddesign. Resultatet blev ett filmklipp som ur ett första persons perspektiv både visar exteriören och interiören..

The visual complexity in real-time applications, like computer games, is increasing with customer demands on vissual apperance. This trend is supported by even better graphics cards from the hardvare industry. This must be taken into consideration when the architecture of a new graphics engine is to be designed. The engines renderer is responsible of generating a picture of scene data. The renderer must cope with increasingly more complex scenes, and must be able to render them depending on available hardvare capasity.

I denna uppsats beskrivs metoder för att skapa en arm i 3D samt att lägga in den i ett foto där den ersätter en riktigt arm. Anledningen till detta är att kunna skapa effekter i filmer och bilder som inte är möjliga med analog teknik. I denna uppsats kan man läsa om tekniker som används i varje del av utvecklingsprocessen och problem som uppstår samt lösningar och tips. I uppgiften finns det med delar som Modellering, Texturering, Rendering, Kamera Matchmoving och Compositing..

Discussing light and lighting in the night-time environment of Tensta, a Stockholm suburb built between 1962 and 1970, this thesis suggests that lighting should be designed for the outdoor environment as a whole. The feeling of safety and human perception are important components in this thesis. Starting with some comments on visual perception and how we adapt our sight to an interval of the visual input we get, makes it possible to understand that more light sometimes hides, rather than reveals, things. Amongst the dispersed houses, in the green parks of Tensta, this turns the pedestrian roads, lit by pole-top-mounted fixtures, into light tunnels in a dark surrounding. Talking about the feeling of safety I am inspired by, amongst others K. Lynch, B. Hjort and J.

The purpose of this thesis is to create conditions in order to plan lighting to a library room after children's needs and wishes, and to gain deeper knowledge about how children experience different lighting environments and what they perceive as good lighting. I was given the task by Huskvarna library to design a lighting plan for their children's department. This is part of the project "Library 2.1-room as a medium" that is going on at Huskvarna library since fall 2007. My questions at issue are: 1. What do children consider as good lighting in a library? 2.

Young stands in urban forests often lack a shrub layer, though shrubs play an important structural and biological role in forests. All layers interact with one another to form a multilayered stand, in which shrubs have a vital role.In this diploma thesis, theoretical models for forest dynamics are compared with four reference stands to detect factors, and principals for introduction of shrubs in young stands. In these stands four different ways of introduction were found. In one trees and shrubs were planted together at the same time. Shrubs spontaneous spread under a canopy of mature forest, in another.

This Master Thesis within Marketing and Strategy investigates the values customers perceive within the Real Estate market in the inner City of Stockholm. The dependent variable is customer satisfaction, and it could be explained by 1) the feeling of light and uniqueness of the apartment, 2) that the apartment is of a satisfying size, 3) the address of the apartment, 4) and the economics, the common areas of the building, and the bidding process. The feeling of light and uniqueness, combined with the number of square meters, and the monthly fee of the apartment, are also identified as the price driven functions of this market. A quantitative method is used to investigate the market, where 107 apartment buyers completed a survey..

In the pilot study for a biography, some of the methodological and/or theoretical problems facing the anthropologist and biographer are discussed.The empirical section is based on a number of interviews I made with my grandmother over the period 1995-2001. I have come across inconsistencies in the material when rendering a historical event. Furthermore, the material makes me reflect on how the biographer or anthropologist is able to handle or interpret that she and the subject/informant has a different attitude to metaphors and how the metaphors can change over time, space and interpretation.The essay begins with a summary review of some of the central social and behavioural scientific theories that can be related to the individual and the biography.There then follows an in-depth discussion based on Paul Ricoeur's philosophy that says that your identity is created in relation to how you look at your history and future at the present time. Identities are created in an interaction between the field we are currently in, the cultural capital that includes gestures, mannerisms, symbols, our language and the area of interpretation the field allows in the culture. Consequently, the biography is also a representation that is created in time and space and between the subject and the person rendering the subject.The biography or ethnography is transient and is of necessity a historiography.Ricoeur talks about the living metaphor.

Syftet med examensarbetet är att studera den subsynkrona interaktionen (subsynchronous torsional interaktion, SSTI) mellan ett HVDC system med spänningsstyva strömriktare och en närliggande generator. Studien utförs med hjälp av datorsimuleringar och fokuserar på att studera dämpkaraktäristiken för SSTI. Studien ska visa hur faktorer såsom den överförda effektens storlek och riktning, vald driftmod och kraftsystemets kortslutningseffekt påverkar dämpkaraktäristiken. Rapporten beskriver subsynkron oscillation (SSO) och tillvägagångssättet vid en SSTI undersökning. En kort introduktion till HVDC Light ges.

Examensarbetet handlar om att utveckla nästa generations koncept för bostadsventilationsdontill Lindabs nya produktsegment. Projektet har gått ut på att ta reda på vad som eftersöks iframtidens ventilationsdon, samt att utveckla dessa tankar och åsikter till visuella idéer. Dessahar bedömts med hjälp av välkända metoder inom produktutveckling samt utvärderats avpersoner inom industrin, så som arkitekter, designers och vvs-konsulter.Projektet har huvudsakligen baserats på Svids designmetodik med kompletterande metoderfrån David Ullman och Jan Landqvists metodik. Moment som ingått i dessa har inneburitanalyser, skissning, utvärdering och 3D-rendering. Detta har resulterat i ett slutgiltigt konceptbaserat på den information som har analyserats under projektes gång..

The main aim of this master thesis was to examine the visual ergonomics and the systematic work environment management concerning lighting issues for nurses within domiciliary care. Further aims were to examine a few existing lighting solutions, to come up with ideas for future possible lighting solutions, and to evaluate if the legal regulations for lighting is satisfying and if the regulations are obeyed in domiciliary nursing.The methods used were a questionnaire completed by 55 nurses, field studies of used lightings in cooperation with a student in industrial esign, test of ten existing lighting solutions in a laboratory environment, and a field test of five existing lighting solutions tested by nine nurses in the home of the patient.The result indicates that 40 % of the asked nurses were dissatisfied with the working light in the patient?s homes. All respondents reported poor working light close to the patient, 50 % reported that this problem occurred daily. One third reported that they had to work in uncomfortable working postures due to insufficient working light, and 15 % reported risk of making mistakes due to the same reason.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

To be examined in hospitals can sometimes be perceived aspainful by children. Therefore there is a need for something,which can distract children?s attention from their perceivedpain. During my graduation project, I discovered a designopportunity to work with suspended ceiling systems inexamination rooms, as there is not much to look at whilebeing examined.The result, Twig Ceiling is an interactive nature-inspiredbacklit module with colored LEDs. Twig Ceiling has onelayer of pattern that is visible when the module is not litand the second layer of pattern appears when turning onthe light.

This degree project was made in cooperation with AssiDomän Frövi and Charlotte Andersson and the main objectivehas been to create to ice cream pacbges from 250 gsm Frövi Light board. The paekages are intended to be easilyresealable while decreasing in size together with the ice cream. The project also describes the food packaging labelsand symbols currently present in the European common market.Both capsules utilize a separate lid for resealing. One of the paekages (Capsuie A) is indended to be cut along withthe ice cream and thereby decrease in size. The other one (Capsuie B) uses a series of flaps for contracting and expandingwhich enab1es adjusting of the size without cutting the package up.The design for Capsuie A is created both as a series of flavours with a super-hero theme intended for children andwith a colfee flavour for a maturer audience.