The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic Lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new Lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

Our task was to create a virtual test bench for verifying memory addresses in our commissioning body?s models. The purpose with the testbench was that it should be created in such a way that it would be easy to change the device under test without any major changes in the testbench.To solve the problem that the testbench had to be able to verify different devices we had to create a general enviroment for how the testbench had to be composed. By doing an analysis of which com-ponents that are usually included in a testbench and which components that were necessary in our project we came up with a generall enviroment for the testbench. Our result was a testbench with the follwing basic functions:* Read from a file that contains read and write operations to the Device Under Test (DUT).* Apply the stimulus to the device* Read the results from the device* Compare the results with wanted values* Generate a log file which contains information about the simulation result..

The information technique is developing at a fast pace and almost all new technique is being welcomed with opened arms. The newest on the market is the tablet device, it´s a device used for surfing the web, sending email, watching movies and playing games. It is now also being used in some schools for educational purposes. My research goal has been to find out how the teachers feel about using the tablet device for educational purposes. I have conducted interviews to find the answers to my questions.

Detta examensarbete har genomförts i samarbete med Svero Lifting. Företaget säljer och utvecklar lyftanordningar. Svero Lifting arbetar idag med att reducera vikten på företagets komponenter genom ett materialbyte och har påbörjat utveckling av en ny lyftanordning, en blockvagn och ett snabblyftblock. Svero Lifting vill fortsätta utveckla företagets lyftanordning så att komponenterna i lyftanordningen passar varandra och utmärker sig på marknaden. Idag har Svero Lifting inga CAD-modeller eller ritningar på företagets produkter.Huvudsyftet med examensarbetet är att skapa en ny design av ett snabblyftblock.

This paper explores the field of virtual reality and how immersion and presences can be increased when it comes to navigation and interaction with Virtual Environments. The availability of VR technology has sparked a trend, especially in game development. Old ways of designing for interactive environments have to be revised. This is done by exploring the massive body of work done on VR, exploring its underlying concepts, using tested design techniques and ways of evaluating interaction for VR. A design suggestion in the form of utilizing a tablet device as the main input device is derived.

Most companies and organizations today depend on technology connected to the Internet. Schools and offices have therefore been providing computers, phones and other technology to the employees. The recent technological development and decline in prices for technology have contributed to making these products a part of everyday life for most people. This has made it very common for employees and students to bring their own devices into school and workplaces.The aim of this study is to define what "Bring your own device" means for Swedish companies and organizations and how it has been implemented in those. The aim is not mainly to generalize to all Swedish companies but create an understanding how the trend is used to provide a basis for continued research in this area.

In this paper we have studied how young adults read news on the internet. The purpose was to seehow the consumers of news were irritated by the adverts on news sites depending on whichplatform they used, a computer or an portable reading device of the brand Apple iPad. Observationsand surveys were conducted on ten people. The news sites we used for this study were www.SvD.seand www.expressen.se. The result show that a majority experienced that their news consumptionwere irritated by advertising, mostly on Expressen's news site because it wasn't perceived asforeseeable..

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

This thesis lays the foundation of the future routines of effective error repotring fortraffic devices in the raiway sector.If a device, for example a timetable display, stops working it is vital that the device isfixed as fast as possible so that the travelers dont miss any important information.The methods that are used today are old and not very effective. It can take time forthe repairmen to find the right device or locating the broken component. At the sametime he is supposed to maintain telephone contact with central control throughoutthe whole session.The need for a new, more effective, system is vital to make the whole repair pfocessmore effective and let the repairmen work without having to contact the centralcontrol by phone.I started this work by examining the possibilities of assigning every object with aunique identifier (ID tag) that could be accessed by a manual scan device. The ideawas that the ID tag could holw information about the object and be obtained byscanning the ID and get the information presented on a mobile device.The work also included building a internet application that enabled the reader to seeand change the information on the ID tag.The result was a database that stored information of different objects which could beobtained by scanning the ID tag and presented by a internet application..

There are many risk factors involved with a sedentary lifestyle. Deep vein thrombosis (blood clot), circulatory problems and contractures are just a selection of problems you can get by too little exercise. For people who are immobilized because of illness, it can be difficult to get enough exercise and movement to avoid similar complications. Because of most medical supplies on the market today are not optimal for use at home, I have chosen to develop a training device for the lower limbs, adapted for use in a bed, both in hospitals and at home. It is important that the devise can be used in any bed, regardless of headboards.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

This thesis describes the developmentof a device called "Oil Separator"which is used for washing vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.