The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Studenter är bland de som konsumerar mest alkohol i Sverige. Hög alkoholkonsumtion och extern akademisk locus of control (ALC) har liknande negativ effekter på studier. Denna studie undersökte relationen mellan alkoholkonsumtion, ALC och alkoholrelaterade studieproblem. 120 studenter, varav 91 var kvinnor, deltog genom att besvara en enkät bestående av The Academic Locus of Control Scale for College Students, the AUDIT Alcohol Consumption Questions och en egenkonstruerad skala som mätte alkoholrelaterade studieproblem. Data analyserades med en 2 (riskbruk/ickeriskbruk) x 2 (extern ALC/intern ALC) ANOVA för oberoende mätningar.

SammanfattningPlatsgjuten stomme för flerfamiljshus är en vanligt förekommande produktionsmetodmed stora upprepningseffekter. NCC har som målsättning att årligen minska sinabyggkostnader och öka effektiviteten i produktion. Med verktyget TekniskaPlattformar kan standardiserade och väl beprövade lösningar användas med minskadekostnader i projektering och ökad kvalitet i produktion som resultat. Då fleraforskningsrapporter har visat att slöseri i byggproduktion är vanligt förekommandehar NCC utvecklat ett planeringsverktyg, Projektplanering. Det syftar till attproduktionsprocessen ska fungera bättre gällande tidplanering, samordning,engagemang och kunskapsåterföring.

Det finns i nuläget väldigt lite forskning inom IT-säkerhet i ideella organisationer, trots att dessa organisationer är en viktig del av samhället och brister i deras IT-säkerhet kan leda till minskat förtroende från allmänheten. Studien har försökt klargöra attityder till IT-säkerhet hos medarbetarna i de ideella organisationer som har medverkat i undersökningen. Tidigare forskning i vinstdrivande organisationer visar att kunskap, attityder och beteenden hör ihop och påverkar varandra, och dessutom att dessa tre faktorer är mycket viktiga för IT-säkerheten i en organisation. För att förstå hur attityderna ser ut i ideella organisationer var det därför nödvändigt att ta reda på även kunskap och beteende hos medarbetarna. Studien kom fram till att attityderna var goda men att ledningens och medarbetarnas kunskaper om IT-säkerhet, och även deras beteenden, var bristfälliga i flera aspekter.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

The construction industry has demands on energy use in permanent buildings. How much energy that is permitted to use during the time the building is produced has no requirements. The purpose with this study is to learn how far Skanska has come with the work of making the building site more energy efficient.A literature study has been performed in the beginning of the study to survey what energy efficient arrangements that can be applied and how they operate. Using site visits and interviews the situations on the building sites have been studied as well as the energy efficient measure that are in use.Skanska has come a long way with the work of energy efficient building sites and they keep improving. They have improved half of their cabins so they use 50 % less energy.

In this paper we have studied how young adults read news on the internet. The purpose was to seehow the consumers of news were irritated by the adverts on news sites depending on whichplatform they used, a computer or an portable reading device of the brand Apple iPad. Observationsand surveys were conducted on ten people. The news sites we used for this study were www.SvD.seand www.expressen.se. The result show that a majority experienced that their news consumptionwere irritated by advertising, mostly on Expressen's news site because it wasn't perceived asforeseeable..

This thesis in Art History and Visual Science is about values to graffiti and graffiti artist Banksy. I have studied values relating to Banksy´s graffiti images through which context they are placed in and where they are located. I have selected two different images of Banksy as an example on the basis of a transnational phenomenon, where the images that circulate in the public arena by street art and other images and imported into the galleries and consumption market. My conclusion is that the values of the images are based on the context in which each room have its surroundings and that therefore the impression will increase. The public space context, signal availability and the white cube context indicates art, and the commercial context signals goods and items that can be bought.

Detta examensarbete handlar om en uppföljning av en enkätundersökning enligt EFQM modellen som genomförts vid BT Products. Uppföljningen består i en djupare analys av undersökningens resultat med fokus på vissa av dess delar. De områden som huvudsakligen behandlas är företagets medarbetare, processer och ledarskap. Tyngdpunkten ligger i att klargöra orsakssamband mellan enkätens olika områden samt att gå djupare in på- och identifiera samt beskriva starka och svaga sidor hos dem. Intervjuer, observationer och statistiska metoder har använts för detta syfte vilket resulterat i att det framkommit möjligheter att förbättra verksamheten i flera avseenden. De viktigaste förslagen till förändringar är: En förändrad organisationsmodell med fokus på värdekedjor Förändrade ansvarsförhållanden och tillhörigheter En långsiktig inriktning mot en styrmodell med utgångspunkt i värden och företagskultur.

The purpose of this essay has been to examine the public`s view of the Swedish eldercare during 2006. This study uses discourse analysis as a research method, the reference material has been articles from the newspaper Dagens Nyheter. The aim of the research has been to find central themes, conflicts and consensus in the discourse of eldercare. The analysis resulted in four main subjects which were based on four main questions; the questions of responsibility and execution, the question of contents, and the question of where the eldercare should take place. The analysis of conflicts and relations of consensus in the discourse of eldercare resulted in two different main views; the traditional and a more modern.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.