Huvudmålet med detta examensarbete var att undersöka om det för Södra timber är ekonomiskt hållbart att tillverka engångspallar till pelletsproduktionens tilltänkta säckningsanläggning i Långasjö, gentemot att köpa in engångspallar från en extern leverantör. Detta gäller då för 30 000 engångspallar om året.Intervjuer togs på Södra timber i Långasjö om vilket virke som var lämpligt från företagets sida att bli av med. Detta visade sig vara brädor av 19x75 mm och 75x75 mm. Dessutom beslutades i ett tidigt skede att en engångspall med måtten 1200x800 mm är en bra lösning då detta är europastandardens mått. Olika alternativ togs fram för hur man skulle kunna ta fram materialet och sänka produktionskostnaderna och avsåg då brädor 19x75 och klossvirke 75x75.

International trade in services has increased over the past 30 years as a result of progress in information and communication technology, increased focus on services from the manufacturing sector and the establishment of trade associations.The international market for healthcare services, also referred to as medical tourism, is growing more and more. Patients increasingly seeking treatment at other countries healthcare systems because of long queues within their own country or because it exists better prices for the same care abroad. However, this type of service exports occurs at a limited extent in Sweden.The purpose of this study is to highlight and analyze the conditions for Swedish service companies to export healthcare services. This, includes the challenges and opportunities that exist to expand the exports of these services.The approach for this study has been in the form of interviews with two market actors and written responses, from the same interview guide, with three market actors. These market participants are the so-called Care companies which export healthcare services in various counties, and the membership organization Swecare who work with export promotion activities for its members in the Swedish healthcare sector.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

In the spring of 2009 Silva Sweden AB was contacted for a collaboration within the scope of a MasterThesis project. The company had discussed the possibility to develop a device that monitors usermovement during different types of exercise. The objective of this Master Thesis has therefore been todevelop and design a multi training device that records the user?s physical performance during severalactivities. The purpose of the thesis project has been to use scientific methods for product development inorder to design a multi device that supplements Silva?s range of products.The project followed a product development process divided into four phases; Market Analysis, ConceptCreation, Concept Development and Construction.

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

This thesis was rendered for the client HAGS Aneby AB that is a global leader in playground equipment. The goal of this project was to develop a seesaw that is available for children aged 5-12 years; both with and without disabilities. The project has aimed to develop a seesaw that fits everyone in the target group without looking specially adapted.Children with disabilities have difficulty using today's seesaws because they consist of only a seat and a handle on each side. It requires that the user has strong arms and legs and can sit up without support. HAGS Aneby AB would like to change this.To gain knowledge of the target group and on the different types of disabilities information was sought for on the internet including the RBU's and UNICEF's websites.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

The aims with the project were to investigate how forage consumption affect production and pigs behaviour around the feeding. This degree project was designed to follow 48 growing/finishing Hampshire*Yorkshire pigs, from 30-110 kg live weight, fed diets with or without 20 % forage inclusion. The pigs were divided in three groups due to dietary treatment. In the first group the pigs were fed 20 % of the energy in the feed ration by long grass/clover silage (LE) and the remaining 80 % by a cereal concentrate. Group two was fed chopped grass/clover silage mixed with cereal concentrate (HE) in the same amounts as LE.

For Swedish companies to compete with low wage countries, developments in theproduction industry moved towards streamlining the entire company. One of themost effective ways for a company to streamline their operations is to review theirproduction. All companies have processes in their production that add no value tothe product. In order to compete, they must be eliminated.The purpose of this report is to reduce work in process (WIP) in the flow ofbashus at Volvo Powertrain in Köping. The aim is also to try to find reasons whyVolvo Powertrain feel that they have problems with the storage principle First in-First Out (FIFO).To meet the objective, empirical studies were conducted at the company whilethe literature in the area was studied.

För att Securitas AB skall kunna behålla sin position i Norrköping Flygplats är det viktigt att de effektiviserar sin bemanning och scheman. Detta krävs för att kunna uppnå kostnadsreduceringar som skall i sin tur ge dem konkurrensfördelar för att behålla sin position vid årliga upphandlingar som sker mellan kommun och flygplats. För att effektivisera sin bemanning och scheman skall teoretiska delar användas för att styra grupper och verksamheten bättre, teoretiska delarna är i form av schemaläggningsprinciper.Vid en effektivisering av verksamheten skall en optimeringsmodell användas med flera funktioner som möjliggör en heltäckande optimeringslösning för att generera den mest kostnadseffektivaste bemanningen för schemaläggningen. Ett tekniskt system som ett informationssystem skall även strukturera Securitas arbete effektivare med en bättre bokföring över de anställda samt underlätta tillämpningen av ett standardiserat arbetssätt. Vikten av ett standardiserat arbetssätt behandlas mycket inom LEAN-filosofin och anses viktig i detta fall för att få de teoretiska delarna och informationssystemet att fungera ihop.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.