Active Vibration Control of a Laser PatternGenerator in Microlithography.

Micronic Laser Systems AB produces and develops machines for the photo mask production market. One of their products is the Omega machine which exposes photo masks using 5 laser beams simultaneously. It is important that the distance between the each laser beam, the x-separation, is the same. The x-separation is today measured by exposing a photo mask with a certain pattern and thereafter measured with a metrology system. This takes to much time and it is desired to find a faster method to measure the x-separation without loosing precision.The task for this master thesis is to improve an existing measurement method which uses a calibration mask.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

Självscanning introducerades i butiker för ett antal år sedan och finns nu i butiker som Ica Maxi och Coop Forum. Investeringskostnaden för ett sådant system är dock hög och butiker med lägre omsättning har därmed inte råd att köpa in detta system. Detta projekt syftade till att utveckla ett alternativ, med en applikation till Android för scanning. Tanken var att kunderna då kan använda sina mobiltelefoner som scannrar vilket skulle minska investeringskostnaden för butikerna.Genom att studera existerande system, togs en lösning bestående av två delar fram, dels applikationen men även en server med en databas för lagring av kundernas varukorgar. För testning av lösningen utvecklades även en testmiljö bestående av en prisdatabas och en kassa i form av ett datorprogram.

Behovet att mäta kvalitet hos olika produkter ledde till framställningen av ett antal mätningsmetoder. Redan vid olika stadier av tillverkning kan man avgöra om produkten motsvarar en viss förutbestämd standard. Den här rapporten kommer att undersöka vilka eventuella problem mätning av kvalitet med laser har i industrimiljö. En konceptuell modell över hur mätning av dornprofiler kan genomföras kommer att presenteras med fokus på att väga tidsåtgång mot exakthet för att skapa en balans som är acceptabel för företagets krav. En beslutsfattande algoritm kommer även att presenteras där ett avgörande ska ske om mätresultaten är rimliga eller beror på fel i mätutrustningen.

This report discusses the development of lessons based on laborations for middle and high school.The purpose of the project was to research the possibility to affect students' attitude towards physicsthrough well-planned stimulating lessons. The lessons were based on the Light and Lasers OutreachKit, a teaching package made by the organisation Laser Classroom, and have been adapted for physicsin middle and high school. The lessons were developed on a pedagogical and didactical ground andwere improved with surveys and peer and self assessment. The lessons were based on laser light and itsproperties. One lesson covered the topic of single-slit diffraction, while the other treated geometricaloptics.

Bakgrunden till detta examensarbete var att Qumex Materialteknik vid ett flertal tillfällen konstaterat att material av typen SS 0725 har uppvisat bristfälliga härdresultat. Materialet, som är relativt nytt på marknaden, är ett gjutjärn av typen segjärn och utmärker sig gentemot andra segjärn på grund av sitt höga innehåll av kisel. Då segjärn enligt den nu gällande EN-standarden klassificeras efter sina mekaniska egenskaper uppstår ett problem gällande SS 0725. Materialet uppfyller de krav som är ställda för EN-GJS-500-7 och hamnar därmed under samma materialbeteckning som ett segjärn med betydligt lägre kiselhalt. Att två material med olika kemisk sammansättning hamnar under samma beteckning kan innebära problem.

Driveability analysis of terrain data offers an important technique for decision support for all kinds of movements in the terrain. The work described in this report uses a high resolution digital terrain model generated from the laser radar data and further processed by the Category Viewer program, and information from the Real Estate Map. Properties of features found in a filtering process are calculated and compared with a set of rules in a knowledge base to get a driveability cost. This cost is then visualized in a graphical user interface. An evaluation of what driveability is and what it is affected by is performed, and a general cost function is developed, which can be used even if not all relevant information is available.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

Volvo Construction Equipment AB Component Division (CMP) I Eskilstuna har idag det globala ansvaret för utveckling och tillverkning av drivlinor till anläggningsmaskiner. De nya kraven på nästa generations transmissioner har dock krav på sig att vara mindre och lättare samt ha mindre inre förluster än den föregående. För att kunna möta detta krav krävs det att kopplingsaxlarna i tranmissionerna blir mindre. För att leva upp till detta samt en förbättring hos kvalitén på förbanden så introduceras två nya fogningsmetoder enligt laser- och lim/krympförband. I denna rapport klargörs flödet genom de två fogningscellerna.

Today, many veterinary hospitals offer rehabilitation as a service. We think that this is an interesting subject and therefore we want to find out what rehabilitation methods that are available in Sweden for dogs and horses. We want to give animal nurses and other persons who have animals as an occupation an survey that shortly describes how the methods are performed, what physical effect they have in the body and to give examples in what conditions they are used. To find out what rehabilitation methods that are available we sent out two different questionnaires, one to hospitals/clinics for small animals and one to hospitals/clinics for horses and other companies that works with rehabilitation of horses. The information about the methods described in our project we have found in literature and on the Internet.

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2015:09.

The first aim of this thesis is to descriptively identify and chart the activities of the strategic intelligence and environmental scanning that take place at the regional collaboration network Regionförbundet Örebro. This identification is essential in reaching the comprehensive and primary aim of the thesis: to discuss, through normative discourse, what the options of improvement are and in which ways systematic operations can be integrating parts in the organization. In order to offer guidance of development from the perspectives of environmental scanning, the question at issue has emanated from activities concerning the present methods of working at Regionförbundet Örebro.During the creation of this thesis, several interviews have been made with people who are regarded to be key roles within the regional collaboration network. An analysis has been made, based on governing documents and answers from the interviews, where possible improvements of the business have been identified. The inferences become parts of a greater potential of amelioration since they are presented as active solutions and proposals that can be directly adaptable to the organization.Our proposals of improvements/ameliorations are constituted by a number of concrete/explicit points such as: a wider public information supply and an introduction of several annual routines and methods..

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne Laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.