In Eskilstuna and Sweden in general the level of reuse of surplus material containing soils and rocks from excavation is low. In this report the potential for increasing the reuse of excavated material in Eskilstuna by using a web-based earth information database has been examined. The purpose of a web-based earth information database is to connect those who have surplus material with those who need material for a fast and simple transaction. The intention is to give Eskilstuna a more environmentally and economically efficient handling of surplus material by increasing the level of reuse and thereby reducing the amount of surplus material that is wasted and emissions given off to the atmosphere during transportation. The potential has been examined in two different ways, by tracing information about a number of projects to see if excavated material driven to the dump could have been used in another project and by interviewing eight of the work leaders active in Eskilstuna.

When SKL (Swedish National Laboratory of Forensic Science) gets images to analyse, the task often is to identify a person or an object. In that work it?s important to find features. Unfortunately images from camera surveillances often contain a lot of noise, so details can be hard to discern.A simple method to improve an image from a sequence is to compute the mean of some of the images. However, the part of interest in the image has to be in the same position in all images.

Shear Strength and Deformation Characteristics of Uppsala Clay with CRS and Standard OedometerTyra Morell Bonin & Magdalena MählerTo see how much a clay compact under different pressure one can use several different methods and in this project, two methods were used, the Standard Oedometer and a CRS apparatus. A Standard Oedometer is a full-time manual device and the CRS apparatus is a modern electric and automatic device. The aim of the project was to see similarities and differences between the two methods and examine which method that were most reliable. This has been done with repeated laboratory tests and afterward evaluations. With this information one can get a picture of how the clay will behave and how it will deform in nature.

When a person arrives at the emergency ward at the Uppsala University Hospital with his or her symptoms he or she explains the problems and then a priority process starts. The staff evaluate at which emergency level the patient is located in a model called Triage. The Triage model helps to decide the priority need and is based upon templates which point out in which of the 5 categories a patient is to be placed, to eliminate any future risk regarding his or her health. A lower triage level means lower priority but implies better health when the evaluation takes place. To obtain optimal effect of the Triage model the evaluation of symptoms must be reproducible so that patients with the same symptoms are placed at the same triage level regardless of whom among the staff conducts the evaluation. The purpose of the study was to see if the resources are allocated based on priority level of the patients.

Användandet av digitala visualiseringar möjliggör nya sätt att kommunisera och presentera det skapade materialet. Är det möjligt att i de digitala tredimensionella visualiseringarna återskapa känslan och atmosfären hos ett naturligt landskap? Stora mängder med fritt tillgängligt material laddas ständigt upp på Internet, men hur användbart är detta material vid skapandet av digitala landskap? Syftet med arbetet är att undersöka detta..

 This report deals with thecollaborative project between FagrellProdukt Utveckling AB and studentsfrom the Faculty of Science andTechnology at Uppsala University. Theoverall objective of the project wasin addition to developing students'abilities, to help Fagrell withverification and development ofFagrells prototype, Fundamental flowreactor, for flow chemistry. Theuniqueness of Fagrells flow reactor isthat it should be simple andaffordable compared to competing flowreactors in the market.The verification was done bylaboratory and simulation sessions.The verification shows that Fagrellsidea on how to construct a flowreactor is very good.The development included bothtechnology and business. The result ofdevelopments can be helpful for thecommercialization of Fagrell flowreactor..

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

The aim of this study was to investigate and compare the availability of construction materials affect children's constructions and play. Observations were made when the children were allowed to play and build with very little and much of the material play-doh dough in preschool. The study is aimed at children aged 3 ? 5 years. Interviews were also conducted with educators in departments where the children spent time to give support to this study.The result shows that the children create as many designs of any material amount.

Mitt examensarbete är en undersökning i att ta tillvara på restmaterial ifrån möbler. Vad kan det medföra i form av estetik och värde? Vad finns det för bra metoder för att ta tillvara på material? Målet är att finna en metod för att förädla ett använt material till något nytt..

Detta arbete har syftat till att undersöka möjligheterna till förbättring av material- och produktionsstyrning vid Sandvik Mining and Construction i Sandviken. Målet har varit att skapa ett underlag för förbättrad styrning av ingående material. Nulägesanalysen visade att förbättringspotential fanns inom klassificeringen av hårdmetallämnen och komponenter. Dessutom var det önskvärt att ett kanbansystem uppfördes på de förslipade hårdmetallstiften som går till den helautomatiska STAMA-cellen. Examensarbetet har gett underlag för en omstrukturering av denna klassificering men även för en framtida uppdatering av den.

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

BAKGRUND: I vår bakgrund redogör vi för den tidigare forskning som bedrivits kring fysiskt undervisningsmaterial i ämnet. Vår teoretiska ram utgörs av Cummins modell för andraspråksinlärning samt Vygotskijs sociokulturella förhållningssätt vilka båda ligger till grund för vår resultatdiskussion.SYFTE: Syftet med vår undersökning är att med utgångspunkt i klassrummets konkreta material studera undervisningssituationer i ämnet svenska som andraspråk, samt undersöka vilka motiv lärare anger för sina val av material och val av aktiviteter.METOD: För att nå studiens syfte använde vi oss utav observationer och kvalitativa intervjuer. I vår undersökning ingår tre lärare på olika skolor som undervisar i ämnet svenska som andraspråk.RESULTAT: I vår undersökning fann vi att lärarna arbetade med ett varierat material och olika aktiviteter i sin undervisning utan att vara styrda av läroboken. Gemensamt för de tre lärarna var att de arbetade med skönlitteratur, läsförståelse och ordkunskap. Resultatet visade också att lärarnas motiv till det material de använde ofta grundade sig på en ambition av anpassning till elevernas tidigare kunskaper och vardagliga liv..

Atlas Copco Tools is a world leading company in tool manufacturing. The productionin Tierp works hard to improve their assembly to maintain its position. This thesis isa part of their improvement efforts to be a more Lean production.The main focus for this thesis was to identify the material flow in the kanban system,which used to supply the assembly groups, focusing on the material flow to assemblygroup 9 and the assembly group 3. Group 3's material flow within the kanban systemwas perceived to perform better than the group 9. The handling of kanban materialand their working methods in the two groups was identify those differences whichaffected the kanban system.As an alternative material supply a study were done in kiting.

According to a decision of the European Commission, measures are to be taken to reduce the use of energy in the EU. The goal is to reduce it by 20 % compared to the current use. This shall be done to the year 2020 (European Commission, 2011). One industry that use large amounts of energy is the construction of buildings which account for almost a third of the energy use (Brogren, 2012). The major part of the energy that is used in the construction industry is not used when the buildings are built, but rather during the rest of their subsequent lifetime.

Collaboration is a form of organization on the rise in Sweden. For health care, it is ofinterest to collaborate with industry to ensure that needs for specialist education andtraining are met and that products developed meet the relevant requirements.Conversely, industry actors have an interest to have a close collaboration with healthcare in order to gain insight into customer needs, provide information about theirproducts and to test products in development.The starting point of this study is an agreement and regulatory framework for formsof collaboration between public health care in Sweden in general and thepharmaceutical industry, the medical device industry and the laboratory technologyindustry. The research questions concerns how this agreement has evolved and theprocess surrounding its emergence may contribute to knowledge about collaborationas a form of organization and the relationship to concepts such as legitimacy,corruption and institutional theory.By tracking the emergence of the current regulatory framework genealogicalthroughout history, the study uncovers how the agreements have played a role in andcontributed to the legitimization and institutionalization of collaboration practices andhow crises have changed the shape of the practices. A theoretical treatment ofrelevant concepts such as legitimacy, institutionalization of practices, corruption andstigmatization of organizations form the basis for an interpretation and analysis of theprocess.The conclusions of the examination of the historical process that led to the currentagreements contribute to empirical knowledge of how crises and stigma affect thelegitimacy of collaboration practices and how the repair of legitimacy can be donesuccessfully after a crisis. The treatment of the empirical material is also a historicalsource for the development of ethics agreements between public health care andpharmaceutical industry and the medical industry in Sweden..