Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements.

Most often when developing a new system there is a need get a functioning testtool up and running. Including time, cost and resources the solution isn?t always obvious, developing your own or buy one ?of the shelf?. The purpose of this thesis is to study how a general testtool for executing functional tests should be designed to be reusable, be based on recognized knowledge and be able to fast and simple be customized for different types of systems. Key functions from the litterature is presented and used in the design of a testtool prototype.

Användning av mjukvaruverktyg när reverse engineering utförs är ett måste för att få ett användbart resultat enligt Hainaut (2002). Kudrass m fl (1997) visar på brister som kan uppstå när mjukvaruverktyg används. Gemensamt för de forskare som har studerats i detta arbete är att de hävdar att företag saknar kunskap för att utföra reverse engineering med mjukvaruverktyg. Har forskarna rätt i att det saknas kunskap eller har företagen mer kunskap än vad forskarna tror? Då dessa forskare har en klar koppling till tillverkning av mjukvaruverktyg så är eventuellt inte deras påstående opartiska och därför är det intressant att se om deras påstående stämmer med verkligheten.

Organizations that want to maintain a good innovation capability can seek knowledge both within and outside its boundaries. Opening up innovation processes, through so-called open innovation, allows organizations to combine internal and external knowledge sources in order to include previously excluded perspectives to the innovation process. This study examines how knowledge is created and transferred when conducting open innovation through crowdsourcing. It is done based on Nonaka?s (1991; 1994) theory of how knowledge is created through conversion processes, where implicit knowledge can be converted into explicit knowledge and vice versa.

In autumn 2010, the Division of Civil Engineering at the Swedish building contractorPEAB made a campaign to increase the number of reported incidents. Informationwas sent to the branch manager who was responsible to enlighten the employees onthe establishment. The goal of PEAB Division of Civil Engineering is to have at least 10reported incidents per accident that generate more than 8 hours absence. Therefore,it is important that the employees understand how the report system for incidentsworks. The number of reported incidents differs between regions.

Municipal safety work is an issue frequently discussed. The new legislation about accident prevention obeys the Swedish municipality to present an action program for accident prevention. In Borlänge municipality there has been no sanctioned proposal for a program. This report presents the problems found and gives proposals for improvements in the future safety work. The guiding words should be unambiguousness, able to control and not too complicated.

Vid produktutveckling inom industriföretag finns idag luckor vad gäller IT-stöd i arbetets olika faser. Införandet av s.k. RBE-system (Rule Based Engineering) är ett steg på vägen mot att försöka fylla dessa luckor. Meningen med ett RBE-system kan sägas vara att ersätta traditionella konstruktionshandböcker med motsvarande konstruktionsanvisningar i digital form. Detta ger möjligheter till automatisering av processer som är tidskrävande, monotona och ofta förekommande, t.ex.

The purpose of this study is to identify the points-of-difference that should form the basis for Bryggarsalen?s future marketing efforts. Bryggarsalen is a newly established conference business in Stockholm. To be able to identify these points-of-difference, Bryggarsalen?s marketing problems have been studied from the resource-based view, claiming that the source of sustained competitive advantage derive from a firm?s unique bundle of resources.

The purpose of this thesis is to examine and present the oportunities of solvingcontrol problems using Modelica. This is done by creating some demonstrationexamples with exercises. These examples should cover as many types of controlproblems as possible. The exercises are aimed for people with basic knowledgein modeling and automatic control engineering but with little or no knowledgein Modelica. There are different types of Modelica implementations and the onesused in this thesis are OpenModelica and MathModelica..

Uppsala universitet The aim of this master?s thesis is to investigate, through text analysis, the role of copyright in development, with particular interest of how the concepts knowledge and access to knowledge are used in Access to Knowledge Draft Treaty and WIPO Development Agenda. The definition of the concept knowledge, as it is used in copyright, is based in a Western historical and philosophical context and therefore excludes knowledge created in another type of society. The consequences of this exclusion have effects on development. Further it is stated that knowledge according to the global copyright scheme will be reduced to a commodity, which will have consequences not only in societies in the global South.

Background: Knowledge management is a concept that is considered of increasing importance in the developing knowledge society. Previous research in the area has to a large extent been based on large multinational companies. Purpose: The thesis aims to clarify how middle-sized Swedish management consultancy companies work with knowledge management. The thesis intends to use existing theories about knowledge management to explain the effect of size and area of operation on management consultancy companies? knowledge management.

The aim of this master thesis is to examine the opinions of the students of Linköping University regarding the role of the university library in their learning process. The study addresses the student?s expectations and satisfaction regarding the library services. The questions we seek to answer are: What are the students? conceptions of Linköping University Library as a part of their learning process? What expectations do the students have regarding Linköping University Library? Does the library fulfil the students? expectations? In what way has the library?s pedagogical ambition reached the students? What are the students? opinions about the user education? The study is based on a web survey complemented with interviews.

This survey aims to investigate and analyze how six teachers on a high school in Stockholm reflect on pedagogical aspects of problem based learning( PBL). The survey focuses on ana-lyzing how the teachers relate to the benefits and problems of PBL and how they reflect on the students development. The survey was conducted on a high school and the method used for the study was interviews, each taking 30-45 minutes. The outcome of the survey indicates that the teachers sees problem based learning as an alternative to what they define as tradi-tional education regarding its epistemology. They indicate that PBL allows the students to define their own questions, to be carriers of knowledge and to evolve analytic skills in relation to the basegroup.

Globaliseringen innebär ökad konkurrens för företag vilket gör det viktigare för företag att snabbt kunna utföra sina kostnadsuppskattningar. I detta arbete undersöks förutsättningarna för att använda moderna teorier inom cost engineering för att kunna förkorta ledtiderna vid förkalkylsarbetet för företag inom custom made-tillverkning. Inom cost engineering har teorier för kostnadsuppskattning används för att beräkna tillverkningstider för tre olika produkter hos ett fallföretag. För att få en bra beskrivning av problematiken med kostnadsuppskattning inom custom made-tillverkning har design science-metodologi använts under arbetets gång.  Resultatet av arbetet visar att förutsättningarna för att använda moderna teorier inom cost engineering för kostnadsuppskattning hos custom made-tillverkande företag är att historisk data avseende för- och efterkalkylsarbete finns tillgänglig.

Denna uppsats har som syfte att klargöra hur långt det är tillåtet att med reverse engineering experimentera med en patentskyddad uppfinning innan patentintrång föreligger. Främst förs en diskussion om hur långt det är tillåtet att experimenteramed en patentskyddad uppfinning, utifrån patentlagens experimentundantag, utan att kränka ensamrätten som patentet ger. För att svara på denna fråga börjar diskussionen ur ett svenskt perspektiv i den svenska patentlagen, med ett instick ilagen om skydd för företagshemligheter. Diskussionen förs sedan ut i Europa för att se hur bedömningen av reverse engineering och experimentundantaget gjorts där och till sist vänds blicken mot USA. Bedömningen som görs är att reverse engineering ges ganska fria händer så länge målet för processen är att finna ny kunskap utöver den kunskap som finns inbäddat i patentet.