After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

I mitt examensarbete har jag undersökt om det lämpar sig att använda en manuell metod för att skapa normal maps till icke-organiska polygonmodeller avsedda för datorspel. Jag har använt mig av Photoshop för att måla normal maps som jag sedan applicerar på lågdetaljerade modeller jag skapat, för att höja detaljgraden avsevärt. Då icke-organisk modellering inbegriper modeller som ska representera hårda ytor, och därmed inte animeras med deformation, så antog jag att denna metod skulle lämpa sig väldigt väl åt dessa ytor som ofta har extremt mjuka former och precisa vassare kanter. Min metod har varit att studera litteratur om Normal Mapping och hur man använder Photoshop för detta. Jag har sedan utfört praktiskt arbete för att utvärdera hur effektiv metoden är samt vilka fördelar den bidrar med. Jag går igenom teori för normal mapping som jag stödjer med hjälp av faktatexter och instruktions-DVDer i ämnet för att sedan redovisa metoden jag använt i mitt arbete. Jag avslutar sedan med en diskussion kring mitt resultat och redovisar vad jag kommit fram till genom mina experiment. Jag kommer fram till att Normal Mapping med Photoshop är mycket väl lämpat åt hårda ytor och även bidrar med optimeringar i arbetsflödet både vad gäller organisering, tidsåtgång samt kontroll över resultatet.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

Knowledge Management (KM) är ett välkänt område inom företagsekonomin. KM används för att hantera kunskap inom företag exempelvis för att skapa, hantera, lagra och dela information. I den här studien har vi gått närmare in på kunskapsdelning hos säljare. Vi skriver, i denna studie, på uppdrag av Företag A, som är verksamma inom transportbranschen i Sverige. I uppdraget ingår det att ta reda på hur Företag A kan ta del av säljarnas kunskap och information om bland annat kunder och konkurrenter.Det teoretiska syftet med uppsatsen är att förstå vilka möjligheter och hinder som påverkar säljare att dela med sig av kunskap till andra i en organisation.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The purpose of this study was to examine knowledge within the social services. We narrowed the study down from general knowledge to scientifically produced knowledge and how the social workers relate to such knowledge. We aimed to see how the social workers perceive different knowledge and how they relate to the different sources of knowledge. We also examined the different factors that will enable and motivate social workers to stay updated with scientifically produced knowledge that is relevant to their work. We also examined what limits the ability or motivation for renewing ones knowledge.

This report aims to provide an insight into the particle physics of today, and into the research that goes on within the field. The focus is partly on the recent discovery of the Higgs boson, and partly on how software can be used to simulate processes in particle accelerators. Basic concepts of particle physics and the search for the Higgs boson are discussed, and experimental results, including those from the Large Hadron Collider, are compared with simulations made in MadGraph 5. Furthermore, simple new models of particle physics are created in FeynRules, in order to make simulations based on the models. To support the presentations of these aspects, some of the underlying theory is built from the ground up.

During the 17th century the production and distribution of printed works increased in Stockholm and Uppsala. However, all works that the publisher wanted to print, did not reach the reader. This thesis aimed to show when, where and how printed books and dissertations did not reach the reader. To achieve this aim, aspects of several well known models showing systems of book production and distribution were combined and adapted to suit Swedish conditions in the 17th century. This combined model focused on processes of selection and was presented and used as a theoretical approach.

In the nurse's profession ulcer care is a common nursing intervention. Being inserted in methods of treatment and updated with evidence-based knowledge is therefore an important part of the nurse's work. Chronic ulcers are expensive for health care and occupy a lot of time. Knowledge is therefore important for ulcer healing, for the patient comfort and to reduce costs. The aim of the study was to illustrate the nurse's knowledge of nursing interventions of chronic ulcer.

Social media is used widely around the world by millions of people every day. In this report an analysis has been made of how organisations that are directed towards marginalized adolescents and young adults, are using social media in their working processes. The data has been gathered through qualitative interviews and case studies of three organisations, which are in different stages in their use of social media. The results from the study indicates that every chosen organisation wants to use social media applications for the same purpose, which is to be available where their target audience is situated, but their progress is reduced by elements such as priority, lack of knowledge and time..

Master Thesis in Managing People, Knowledge and Change (BUSM18)..

The aim of this report was to do a case study at a geothermal heating system which has been in operation for about 5 years, and study if its performance has changed during this period of time. A literature study about the processes involved was also done in purpose of background knowledge.The tenant-owner?s association Duvan at Petterslundsgatan in Uppsala installed year 1999-2000 a geothermal heating system. The purpose of this installation was that they hoped it would lead to a smaller usage of district heating which would lead to a reduction of the heating expenses for their buildings. The geothermal heating system consists of 19 energy wells and 4 geothermal heat pumps, and it is one of the first systems of that size in the region of Uppsala.

Purpose: We wish to gain a deep knowledge about product development processes in relation to the aspect of time in companies in highly technological and rapidly changing markets. The purpose is to establish how organizations better can employ time as a resource to make the product development process more efficient. Conclusions: Information we gathered from theory and primary data show that information flow, synchronization and time profit when seeing time in three dimensions are factors which should be reflected in the architecture of a product development process. To illustrate our findings, we decided to create a model..

The aim of this paper is to define the perceived consumer values that physical record stores create in order to compete with other distribution technologies. A qualitative method has been used, based on interviews with managers of three records stores in Stockholm. Interviews with their customers have been conducted also. The content has been analyzed with passable theories and the two sources have been compared when adequate.The conclusion of the study is that the physical record stores create many different consumer values, and that many of these are hard to transfer to other distribution technologies. One of the most important values for the consumer is that the personnel have a broad knowledge about music.

The aim of this study was to examine the knowledge and the experience that school counsellors have about tics and Tourette syndrome. This study is based on a qualitative research which we conducted with semi-structured interviews. We have done five interviews with different school counsellors in a small municipality in southern Sweden. The theoretical approach that was used in this study was theory of knowledge as a comprehensive theory and professional competence which includes formal knowledge and tacit knowledge. Some of the study?s conclusions are that the School Counsellors had different professional competence about tics and Tourette syndrome.