Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

This master thesis has been carried out at Scania R&D at the department for Powertrain Control System Development during the winter of 2010/2011. In the thesis the writer examine and evaluate the existing method for collecting information from the tests carried out during the development of the Powertrain Control Systems software. It also contains suggestions for how a new method that enhance the validation elements could look like.The master thesis uses Vicentes theories of the ecological approach and theories of how knowledge sharing of tacit and technical information works within an organization and between the organization and its customers. First a workplace analysis at Scania R&D is carried out to see how Powertrain Control Systems work and how they test their software. Second a control task analysis, where the aims decided on after the interviews, is compared to the existing method.

En sammanfattning av uppsatsen på maximalt 8000 tecken..

Within system development users have rarely been involved or received much attention during the development. Most of the times, the primary focus within system development lies on insuring functionality, rather than making the system usable. The literature specifies that a non user-centered approach can contribute to a product with low usability, which can lead to an ineffective and unsatisfactory experience for the end users.The purpose of this thesis is to begin an investigation to see if the use of non user-oriented system development methods is a possible cause of low usability in the final system.To achieve the purpose of this thesis, we have conducted a case study. Within the case study we examined the usability of a time reporting system. The case study included seven minor studies; an investigation concerning the development of the system, an expert evaluation of the system, interviews and observations of users, developed paper prototypes and executable prototypes, both which user testing was performed on.The result of this study shows that by working with user-entered methods, the usability in the time reporting system increased after the design had been revised.

In industrial control systems PID-control remains the prevalent strategy, also for processes that would benefit from model based control. The purpose of this thesis is to evaluate whether model based control can be readily implemented in an industrial control system. To this end a simulated surge tank with a simulated industrial control system is studied. For evaluation two scenarios with specified objectives are selected.Following a review of LQR and versions of MPC, Predictive Functional Control (PFC) is considered the most suitable for implementation. PFC is a form of MPC developed with industrial applications in mind and therefore has several advantages for implementation in an industrial control system.

Feedback tools support electricity users within the Swedish residential sector to increase their knowledge of electricity and the electricity market as well as to become more aware of their electricity consumption, which in turn encourages a reduction and an increased flexibility of electricity use. The primary aim of this study is to identify and analyse how existing feedback tools can be improved, to ensure that they contribute efficiently to the achievement of the EU objectives congruent with a more sustainable energy system in 2030, emphasizing: greenhouse gas reduction, increased energy efficiency and an increased share of renewable energy. In order to reach the primary aim of this study, existing feedback tools have been identified and mapped and interviews with feedback tools providers have been conducted. The study is limited to three research areas: the practical functions of feedback tools, available technology and the use of feedback tools.The use of more efficient feedback tools will provide an increased success rate for energy management, which includes both behavioural changes and energy efficiency. According to the results from the interviews conducted for this study, an increased use and user frequency is important to utilise the energy management potential.

This Master of Science thesis project handles issues around managing data from the digital tachographsystem. European legislation states that companies must download the data of the digital tachograph systemand store it for at least one year for control purposes. The system stores data on the vehicle unit located inthe driving compartment and on smart cards personal for each driver.Acquiring data from the previous analogue tachograph was done instantaneously since the data wasphysically printed to a circular paper chart when driving. To acquire data from the digital system one mustperform a download from the vehicle unit and later transfer it to some form of backup solution for longterm storage. Data must also be downloaded from the driver smart cards.Download of data from the vehicle unit is the most time consuming task and may take up to 30minutes pervehicle.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

This thesis describes the process of developing a reservation system for common resources through a TV-interface. The system is developed in cooperation with the company Dreampark and is built to work in their platform for TV, Dreamgallery. The main goal was to develop a reservation system and to make it work with Dreamgallery, to develop a demonstration version of the system. The thesis describes the approach for developing an easy-to-use and customisable program and interface for making reservations. How this is inserted into an existing program in a suitable way.

The increased interest in a sustainable environment puts pressure on companies in the manufacturing industry. Rexcell Tissue & Airlaid AB (Rexcell) in Skåpafors produces paper to be converted into tabletop and hygiene products. Rexcell is certified according to the environmental management system ISO 14001, gaining competitive advantages by showing that the company works toward a sustainable environment and that they follow current legislation. The activities at the company are classified as hazardous to the environment according to the Environmental code. Every year, the activities are inspected by an independent inspector.

En explorativ studie har gjorts för att undersöka ett eventuellt förväntningsgap och dess effekter kring den nya rekommendationen för FoU mellan analytiker och redovisningsexperter. Det finns många tankar kring de nya redovisningsreglerna av FoU. Det väcker en diskussion kring fördelar och nackdelar med att aktivera och direkt kostnadsföra FoU-utgifter. Fou räknas som en immateriell tillgång vilket innefattar svårigheter att beräkna det framtida värdet för tillgången. De nya reglerna sägs ge en bättre matchning och bli ett rättvisare system.

Syftet med uppsatsen är att undersöka hur rekryteringen till arbete av studenter från Sport Management-programmet vid Högskolan Dalarna har gått till, samt vilka personliga egenskaper och meriter som har varit avgörande för att erhålla anställning inom den idrottsrelaterade organisationen. Undersökningen har genomförts i intervjuform med arbetstagare som tidigare har studerat Sport Management samt med deras arbetsgivare. Resultatet visar att idealbakgrunden för att erhålla anställning inom idrottsrelaterade organisationer är:- Tidigare aktiv idrottare/insatt i idrotten för att veta hur det praktiska fungerar- Akademisk utbildning, förslagsvis Sport Management- Arbetslivserfarenhet inom idrotten- Brett kontaktnät- Att visa framåtanda - Utåtriktade och ambitiösa personliga egenskaper.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

En kvalitativ studie om en liten regioanl banks resurser och förmågor. Teoretisk referensram: resursbaserad teori..

En sammanfattning av uppsatsen på maximalt 8000 tecken..