This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

 Date: 2008-10-06Level: Bachelor thesis within Information Technology and business economics, 15p, EIK021Authors: Anna Karlsson, akn05009@student.mdh.seLena-Maria Lindström, llm05002@student.mdh.seMagnus Wretlund, mvd05001@student.seTutor: Marie Mörndal Title: Managing IT-incidents, a case study at ICAs IT department                            OperationsKeywords: IT-incident management, IT-incident management process, IT-incident, ITIL, CCTA Problem: An organization can benefit by having an established management process of handling IT-incidents. But how can this be achieved? Are there step-by-step procedures? What´s included in the management process of IT-incidents? Is the size of the organization relevant to which model is to be chosen? Can the work of the writers of this essay result in a recommendation of a specific model for IT-incident management? These questions lead to the following essay question; How are IT-incidents managed?Purpose: The purpose of this thesis is to describe and discuss how IT incidents can be managed.Method: The writers of this essay have performed a case study at ICA, a Swedish food retail company. Eleven interviews with nine different persons have been carried out. The interviews are analyzed in the chapter called Resultat och analys.Conclusion: Our conclusion is that there are both similarities and differences in Dept.

This study aims to examine how performance management is compatible with the operations at Sida, Sweden?s International Development Cooperation Agency, by performing interviews with representatives from Sida. The public sector is facing increased demands on accounting, which has emerged as an institutionalized social norm in society. The nature of Sida?s operations, however, proves to be highly complex, rendering results based management difficult to implement.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

At ABB LV Motors in Västerås the shaft is assembled into the rotor with a shrink fit. After athorough investigation of the assembly method, several factors that make the insertion of theshaft more difficult has been discovered. Some affect the assembly directly while others onlyhave an indirect influence. The investigation has shown that the radial play between the shaftsouter radius and the rotors inner radius might be too small which could lead to anunsuccessful assembly. For the larger rotors, the condition is the opposite, and the rotor mightmove compared to the shaft direct after the assembly when the rotor still is warm.

Title: Locally Integrated Groups ? A special education alternative Author: Jennie Arvidsson Type of essay: Exam essay, second level (15 credits) Supervisor: Barbro Bruce, Examiner: Lisbeth Ohlsson Program: Special Education Program at Malmö Högskola, Sweden Date: 2012-01-12 Present study is an attempt to describe how staff perceive their working operations in seven locally integrated groups, for pupils in special educational needs. By submitting a questionnaire to all professions within the groups I have tried to find similarities and differences in their statements from both structured and unstructured questions. The study is an attempt to contribute knowledge about how these groups can be understood and developed, based on a special education perspective, systems theory and sense of coherence (KASAM). The results shows that there is a consensus among the majority of staff opinions of the systems? opportunities as well as dilemmas.

The thesis project is accomplished during winter and spring 2008 at Karlstad University at the faculty of technology and science. The tutor at Karlstad University is Nils Hallbäck and the examiner is Hans Johansson. Rolls-Royce at Kristinehamn in Sweden is the initiator for the project. The thesis project title is design of the blade bolt joint on Kamewa CPP. CPP stands for controllable pitch propeller.

During 2004 to 2008, The United States Marine Corps (USMC) executed counterinsurgency operations in Anbar Province with the purpose to stabilize one of the most violent areas in Iraq. The Marine Corps successfully managed to suppress the insurgency as violence dropped dramatically in late 2007. What did the marines do in order to suppress the insurgency? Why did violence drop in the province? The Marine Corps approach and procedures have been examined earlier through theories of organizational learning and adaptation. However, there is an absence of studies aiming to analyse the Marine Corps? counterinsurgency approach through the analytical lens of counterinsurgency theory.

Globalization is one of the most popular catchphrases in the international relations debate today. Globalization is a complex concept with as many definitions as authors. National borders or jurisdictions do not control the phenomenon, instead, it is moving without restraints from region to region. Is this a threat to the sovereignty of nation-state and an end of the system of Westphalia? Does the globalization undermine the nation-state by increased factor-mobility, less tax revenue and participations multilateral co-operations, as the globalists think? Or is it strengthens its importance by offering better allocation of resources through free and healthy competition, as the skeptics believe.The aim of this thesis is to analyze theories of globalization by applying them on Sweden and the Netherlands.

?Tollarsjuka? is a disease with a suspected immunopathological background seen in Nova Scotia duck tolling retrievers. Pyrexia, lameness, stiffness and joint- or musclepain are typical clinical signs. The purpose of this study is to describe case histories from dogs with a possible evidence of ?tollarsjuka?. 18 private dogs were included in this report. Generalised stiffness, lameness and fatigue were the most frequent manifestations of the disease.

Today, "the digital library" is the common way of describing a managed collection of information, with associated services, stored in digital formats and accessible over a network. Digital libraries have mainly been developed at research libraries, but during the last few years public libraries have started to offer similar services.The aim of this Master's thesis is to study how the Swedish public libraries plan to develop their digital libraries according to their mission statements, and in what way they have implemented them at their web sites. 21 public libraries, the largest in each Swedish county, were investigated.The library mission statements are investigated to find out in what terms the digital libraries are described and to what extent. The library websites are examined with respect to what kind of digital services are offered, to what extent they supplement or replace the physical library, and if there are new digital services not found in the physical library.In most mission statements the digital library is referred to in sweeping terms like "IT activities" and "new media". However, a few of the libraries clearly regard the digital library as an important part of the future operations, speaking of it in well defined and extensive terms.The public library websites are relatively homogeneous when it comes to services supplementing physical library activities, like web access to the library catalogue and links to other library catalogues.

The ski resort is a business unlike any other. While providing the customer with a service, it produces the service in a manner that in many respects resemble the traditional producing company. Therefore, since the challenges facing the ski resort are a mixture of what can be found in these different environments, this study aims to investigate the applicability of Lean principles in this context. With a qualitative approach based on direct observation, combined with survey data from 2819 respondents, we evaluate the expected effects on customer value of ten commonly defined Lean principles. The study finds that although Lean theory can help disseminate customers throughout the resort and provide greater transparency, the nature of the operations calls for caution.

Due to the increasing international operations for the Swedish Armed Forces these new types of opponents needs new tools to cope with these commitments. A couple of years ago the Swedish Armed Forces had no non-lethal weapons, but today the Swedish soldier has a number of tools to choose from.The purpose of this paper is for the reader to get a presentation of which non-lethal weapons are used today by the Swedish Armed Forces and a sample of what non-lethal weapons are out on the market today. My main question is which non-lethal weapons do the Swedish Armed Forces? miss in their non-lethal capabilities set.I have collected information from a wide selections of sources like reports from the Swedish Defence Research Agency, the Swedish Armed Forces? own regulations and the Internet. The information is then processed and divided into five chapters: The development of non-lethal weapons, description of technologies, non-lethal weapons in the Swedish Armed Forces, Non-lethal weapons on the market and Results.This paper is limited to handheld, portable and man to man non-lethal weapons, all non-lethal weapons in the Swedish Armed Forces or on the international market are not covered.My conclusion is that the Swedish Armed Forces should acquire three 40 mm projectiles, one 12-gauge projectile and one TASER®..

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.