Internal communication is very important for the success of an organization. The county council Landstinget i Värmland is a large organization with many managers on different positions. Every one of these managers gets an email every week, with the message that a new manager letter, called Chef, is published on the intranet. With my paper I am examining what the managers think of this letter, how they use it and if managers on different positions differ from each other in opinions about and use of the letter. I want to find out if there is a need of Chef as a part of the internal communication of Landstinget i Värmland.To answer these questions, I have chosen a quantitative method in the form of a questionnaire which is send to all the receivers of the manager letter.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Background: Many authors consider knowledge to be a significant source for competitive advantage. Replicating companies found their competitiveness on an ability to leverage its knowledge base by replicating its business model in new contexts, a process often referred to as the McDonalds approach. Several authors emphasize that an efficient method for knowledge transfer may increase the risk for imitation. Purpose: The purpose of this study is to examine in an explorative manner how strategies for replicating complex knowledge systems are employed and developed. Furthermore, our ambition is to explore the notion of replication strategy.

Swedish authorities have been dealt a mission by the Swedish state, where each agency works on the basis of their assignment. Communication has become more and more important for authorities, there are several reasons for the use of communication and they may differ from authority to authority. Some authorities claim that the purpose of the communication work is to create awareness and recognition among citizens. A communication form that has become increasingly important for government agencies is social media, according to the government authorities should implement social media in their communication work because it is very important that the authorities are available where the citizens are. Previous research has focused on the risks and opportunities that the social media generates for the public sector.

Along with the rapid expansion of wind power in Sweden during the last decades the competition about favorable areas has hardened. This among other reasons has caused the projectors to look into development of wind power in forests. There are several aspects regarding fatigue loads on the constructions that are severe in complex terrain, among which turbulence is one. The levels of turbulence which are accepted in order for the turbines to face a life length exceeding 20 years are regulated by the International Electrotechnical Commission, (IEC). In order to keep the turbulence below these levels there are three major steering tools to use: The ambient turbulence decreases with height and can therefore be regulated by the hub height of the turbines.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

The past and ongoing structural change in Swedish agriculture has led to an increasing number of large-scale farms. The biological factors associated with large-scale farming operations may cause increasing variability, risk and reduced yields due to sub-optimal timing and management of field operations. The theory of economies of scale suggests that largescale production may benefit from lower costs due to scale efficiencies. Thus, large-scale farms may face cost reductions in terms of long term inputs factors, e.g. agricultural machinery.

In the history of scientific visualization techniques there is a lack of social science practices and methodologies. The advent of modern computer graphics brought the use of visualizations into a whole new era, but even though the tools by which such modern visualizations are created become easier to access and use, the lack of social science researchers harvesting the benefits of such tools still remain. This ease of use, increase in power and accessibility plus the ever growing need within the natural sciences to augment the human senses has further complicated the relationship between scientific methodologies, validity, reliability and the use of visualization techniques. This relationship must be explored, demystified and understood in order to fully grasp the impact of visualization practices when incorporated into any given scientific method. Within the social sciences there is one example of a tradition that has since its conception carried within it a graphical notion and a visualization practice.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

This paper is a thorough review of my internship, during which I designed infographics at Grafiskt Center, SVT, Stockholm. The purpose has been to find out what guidelines and policies SVT has regarding infographics while producing infographics in a professional environment. In addition, I present the daily routine at SVT and the tools used during the work process. Furthermore, the paper contains a reflection of my work effort during the internship as well as thoughts on how I adjusted to the guidelines in question. Finally, the essay treats some examples of infographics which I produced during my time at SVT..

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

As a result of today`s competitive situation, the demand on the rapid development of research has increased. Both universities and companies are realizing the importance of a functioning and well-developed cooperation. A close collaboration and communication between universities and the business community has in many studies been shown to be very important for business development and knowledge transfer. The purose was to examine how communication and collaboration between universities and industry can be developed and strenghthen on the basis of innovative thinking. In order to initially identify the perceived problems the authors studied how communication and cooperation manifests itslelf today between the two parties, what does not work and how the existing tools for communication and collaboration look like today.