The free choice of upper secondary school?A study of the meaning of the information channels for the choice of upper secondary schoolAuthors: David Fridner & Rikard ZeilonMentor: Ingela WadbringQuestionnaire studyDate: 2008-08-11AbstractThe choice of upper secondary school is a very important choice, both for the school and for the ninth grader. In Göteborg, the free choice of upper secondary school has generated several new information channels apart from the traditional counselor, daily news and the acquaintance. Today it is harder than ever to reach the pupil through the constant media noise and new forms of communication such as events appear. The fight for each pupil gets more and more important every term and it has now become real big business.Today?s youth is imprinted by a growing individuality and everyone knows that equableness is something very important.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

Bakgrund och problem: Det som i dagligt tal kallas finanskrisen runt om i världen startade redan år 2007 då bostadsmarknaden i USA kollapsade. Det var sedan under hösten 2008 då banken Lehman Brothers gick i konkurs, som finanskrisen fullt blommade ut. Bankbranschen blev en bransch som kom att påverkas hårt, då flera banker fick statligt stöd för att undvika en konkurs. För att ytterligare försöka underlätta för bankerna och andra finansiella institut, kom IASB i oktober år 2008 ut med en ny tillämpningsmöjlighet av IAS 39 och IFRS 7 som berör finansiella tillgångar. Den här studien ämnar undersöka vilka effekter på resultat- och balansräkningen som de nya tillämpningarna fick för de banker som valt att omklassificera sina finansiella tillgångar.

The visions of the United Nations concerning sustainable development and conservation of biodiversity can only be realized if the human population succeeds in creating coexistence between human and wildlife. Landscape architects are able to influence on how landscapes are to be maintained and developed. The negative impact of infrastructure on wildlife has become a critical problem in Sweden and other parts of Europe. Wildlife crossings has been developed as a solution for the problems of road barriers in the landscape. The crossings are made to give animals a better opportunity to cross roads.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

We live in an exciting society, characterized by continuous changes and challenges. The effects of the globalization are widespread. The continuous flow of people, capital and goods follows in the wake of advances in communications, transport and information technology, resulting in a changed situation for different stakeholders in the society. This situation leads to increased cooperation and exchange, but also increased competition. The primary means of collecting empirical data for this study was interviews and a document study.

The purpose of this study is to investigate, and if possible explain, how background, childhood, and education in a municipal or regional context can affect young peoples? life trajectories.The living conditions for the population in the coastal region Roslagen with its geographical and historical specificities has during centuries largely been characterized by practical crafts-manship. With a growing share of non-permanent residents in the region with demand for help and services, this culture has during the later years been able to prosper. The social reproduc-tion in the municipality also seems to be extensive. In addition to original background, appar-ently the municipality?s service-dominated trade and industry culture has also affected the choice of education and profession of the youth in Norrtälje.