The management at the City of Stockholm?s Sports Department have problems. During recent years several IT-projects have been launched but results are worse than could have been hoped for. The projects are generally perceived as being too expensive, too time consuming and not to have delivered the expected results. This thesis aims at giving the City of Stockholm?s Sports Department theoretically based advice on how to improve their management of IT-projects.

The purpose of this thesis was to describe how service producing IT- companies handles their internal marketing. We wanted to understand how management deal with internal marketing activities and how different companies create a working environment to encourage employees to motivation and well-being. To be able to find out we did a case study on a service producing IT-company. Two personal interviews were done with two of the managers. Our empirical research showed that the company used internal marketing on a daily basis.

In order for a business management to be able to make informed decisions for their companies need enterprise management system regularly checked by internal audits. The aim of purpose with this work was to develop a working manual for integrated internal audits. This was done through a litterature study and interviews with auditors. An in-depth interview was conducted with an experienced auditor to get more understanding and depth of the internal audits process, and how the manual could be designed. Discussions were held with the person responsible for environment, health and safety at Swedspan Hultsfred to adjust the manual to the company?s internal management system.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

The purpose of this study is to investigate two Handelsbanken offices and how they work in similar ways when dealing with internal communication. The goal is to answer if and in what way the managers` and the employes perceive their internal communication at the two bank officies. By a comparation between the two decentralisized officies the aim is also to study what differences and/or similarities that exists in internal communications?Are managers and employees satisfied with the communication that flows in the organization? I find it interesting to investigate in wheather there exist a similarity in the internal communication between the managers and the employees since it is a decentralized organization.I have made five semi-structured interviews with two managers at two different Handelsbanken offices. Additionally two interviews with two employes at one of the offices and also one interview at the other Handelsbanken office.By the study I have found that all respondents have a positive impression according the internal communication.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This study focuses on the internal marketing and how it affects the complaints by companies? communication control. Our purpose with this subject is to increase the understanding of which components affects the relation between internal marketing, communication control and complaints. We have chosen the subject, internal marketing because it caught our interest in an earlier course. On the basis of the literature of costumer complaint there have not been so much research about it and that is why we have chosen this perspective on internal marketing.This study is based on a qualitative approach.

Many IT projects that have been developed in recent years are often considered to be unsuccessful. According to a study by Exido up to the 72% of all IT projects are considered to be failed. A failed IT projects means that the organizations that have ordered the new system may have higher costs or/and the system will not be ready in time. If costs are too high the new system might not be installed in the organization or if the system is not completed within the specified time frame the organization can become stagnant.In this paper we conduct an investigation of the failure of IT projects there we will examine where, in the systems development lifecycle four different phases, projects fail. We will conduct an empirical study of each phase, where we describe the key steps in the process; we will also investigate failed IT projects that are linked to the current phase.

AbstractTitle: Internal communication at IKEA ? A functional analysis of IKEA Uppsalas internalcommunication (Intern kommunikation på IKEA ? En funktionsanalys av IKEA Uppsalas interna kommunikation)Author: Fredrik JohanssonAim: The purpose of this study is to analyze the internal communication at IKEA Uppsala.Are the channels of communication working efficiently? How is the information received by the employees? Finally I will make a few suggestions on how the internal communication can be improved.Method/Material: The method used in this study is quantitative. The internal communication at IKEA Uppsala is analyzed based on the results of a questionnaire. 75 employees at three different divisions were given questions on how they appreciate the communication channels at IKEA in Uppsala. 50 answers were received.Main results: The results clearly show that even though the internal communication at IKEA seems to work well in general, a few of the channel needs to be improved.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.