The main purpose of this thesis has been to address the problem connected with conservation ofspecific objects in historic buildings that have a protected building status. The immaterial demandsand environmental concerns of a place of cultural significance are discussed as opposed to the welladaptedsetting of a museum, with regard to long-term preservation. In an authentic interior of acertain era, large-scale individual treatments of the objects that define it and regulations forconservation-related reasons, may not be considered a worth-while effort, as it is often the integrityof the environment as a whole that has been declared as significant. To investigate the relationshipbetween object and its context, a case study has been conducted by examination of the propertycalled ?Curmans villor?, located in the seaside community called Lysekil.

This bachelor thesis aims to draw attention to sound in the heritage sector in Sweden. In particular, to thesoundscapes that can be identified in our cultural heritage environments. Sounds in an environment, here calledsoundscapes, affect our perception of the environment and how we remember it.To find out how the heritage sector uses and would be able to use sounds, I have firstly studied if audio recording iscomparable with the visual photographic image. I then present examples of sound documentation concerning theconservation of built environment. In addition, I have interviewed five key informants who all have a centralresponsibility for five cultural heritage environments.

The aim has been to create a new student housing where there should be more togetherness between people who live in the residents. The house will have more common areas for the integration of students for a pleasant stay in Växjö. We have concentrated on finding and solving the interior design of the joint surfaces. The proposal consists of CAD- drawings.The student area is intended to be placed on the Brände udde, which is part of Campusvision 2005..

This account deals with my degree in furniture design. The project was done in collaboration with the architect firm Byggnadskonst AB in a quest for the cafe chain "Vivels"Byggnadskonst AB?s mission was to make the interior of the cafe that Vivels is building in Larsberg Center on Lidingö. My assignment was to design chairs for the café. In the beginning I had even thought about designing a table, but as time past I focussed more and more on the chairs.

This account deals with my degree in furniture design. The project was done in collaboration with the architect firm Byggnadskonst AB in a quest for the cafe chain "Vivels"Byggnadskonst AB?s mission was to make the interior of the cafe that Vivels is building in Larsberg Center on Lidingö. My assignment was to design chairs for the café. In the beginning I had even thought about designing a table, but as time past I focussed more and more on the chairs.

Background: The real estate market has previously been subsidized by the government. The construction has been characterized by standardization and large scale complex. In the current situation there are other conditions on the real estate market, subsidies do not occur at the same degree and the market is more competitive. Customer influence has also changed. Today the customers want to customize their apartment by personal needs and lifestyle.

Background: The real estate market has previously been subsidized by the government. The construction has been characterized by standardization and large scale complex. In the current situation there are other conditions on the real estate market, subsidies do not occur at the same degree and the market is more competitive. Customer influence has also changed. Today the customers want to customize their apartment by personal needs and lifestyle.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

Productivity of Norway spruce (Picea abies) and Scots pine (Pinus sylvestris) was studied on 12 sites in coastal areas of northern Sweden. On each site, sample plots were placed in adjacent Norway spruce and Scots pine stands with similar ages in between. Basal area, tree height, Site Index, volume production, simulated maximum mean annual increment (MAImax) and tree vitality were compared for the two species. Average basal area at the time of measurement was 30.4% larger for Scots pine stands than for Norway spruce stands. The difference between the two species in basal area increment during the last 10 years was related to stand age.

This degree project has been done in parallel to the advertising agency Hera in Uppsala, and containsthe creating of a logotype and graphic profile for Aircall, a new big chain of shops dealing with telecommunication.Aircall was found 1 February 2004, when three smaller companies became one. Thisnew company were in need of a common brand and a uniform profile. The created graphic profile hasbeen applied to visiting cards, letterhead, envelopes, letter cards, bags, cars and advertisement. Thegraphic profile has also been used when designing the shop interior end exterior. Research has beendone on competitors graphic profiles and advertisement.

Mycket har hänt i Sverige sedan de första vattenkraftverken bildades i början på 1900-talet. När vi nu gått varvet runt gällande energiformer finner man att vattenkraften är den enda energiformen som består. Olja är en icke-förnybar energikälla och bidrar till miljöförstörelse, kärnkraft är ren men farlig och samhällskänslig energiform som är under avveckling i Sverige. Sverige är långt framme i energitänkande, och när nu tillgången på ?svensk? energi blir mindre i och med avveckling och priser som ökar när de marknadsanpassas med övriga Europa, måste vi som bor i Sverige minska energikonsumtionen..

The aim of our study is to ascertain whether a hanging suspension fluorescentlamp for a private home environment is going to be attractive for a largeaudience. We want to open up for new uses of fluorescent lamps as lightsources.The main approach in this work is how to design a fixture with fluorescentlamps as a light source that will meet the requirements and requests of thehome environment could look like. At the same time we want to make a newimpression of how a fluorescent light source.Primarily we used a quantitative method, but this was rejected after a pilotstudy. Instead we used a qualitatively based method in the sense that weconducted a group interview as well as individual interviews.Based on data from the interviews and our preliminary work a prototype wasbuilt. This prototype is a fluorescent fixture equipped with 2x14W T5fluorescent lamps, dimmed separately.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

I design a service building for the climbingcompany Klättertorpet.Klättertorpet is a small company that is situated outside Lysekil.Klättertorpet o!ers courses in climbing and campingsite."e new building will include kitchen, room for socialmeetings,gym, a small shop and safety lockers. "e starting point revolvesaround how to capture the companys values and philosophyin the design. "e purpose was to add value to the companythrough the design and for myself to get more experience ofworking with a client. During the project questions developedin to how to work with the hole lifecycle of the inertial in mindand how to make the place attractive to climbers. I worked withmodels, moodboards and sculptures to explore the form.

This report is about the exam project; Blomgren- a collection ofpatterns. During eight weeks I have from the family Blomgren, whowas my grandfather?s family with siblings and parents, produced fivepatterns for textiles into interior and space. In addition to thefamily as an inspiration, I have taken into account of the collection?sname - as a word and the meaning of the word.