Sökresultat:
4349 Uppsatser om Inter-municipal project - Sida 40 av 290
Kanten : mötets poesi
Water connects heaven and earth. Water is the most obvious element of nature. To move in water is for me more than cooling of on a hot summer?s day. It is about freedom and the feeling of being above the state of things.
Tillvaratagande och återanvändning av träbyggnadsmaterial : tjänstedesign för återbruk inom byggsektorn
The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.
Utveckling av dyksystem : Handhållen enhet för sökning under vatten
Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.
Speaking English: dess bidrag till kunskap i engelska för
elever i läs- och skrivsvårigheter
The aim of this study was to describe and analyze if and in that case how project Speaking English contributes to improved skills in English to pupils in reading and writing difficulties. The project started out in order to give pupils in reading and writing difficulties an alternative to the regular English teaching. The study was carried out in two nine-year compulsory schools. We have conducted interviews with both teachers and pupils to see what they think about the project. According to the teachers we interviewed Speaking English contribute to improved skills for the pupils and they also believe that their chances to pass the 9th grade will increase.
Human vs environment. En visuell identitet
This is a project with the main purpose to create a visual identity and platform for the release of the new started record label Human vs Environment, by finding a form and logotype for the homepage and packaging of the first vinyl ep record by the artist Mr Kaizen. This has also been an exploratory work with the target to get a broader competence in the field of visual communication and increase my understanding of the designs communicative aspects of running a design project with an external partner from concept to finished product..
Vem bestämmer egentligen? : Om handelsetableringar och kommunal samhällsplanering
Denna uppsats behandlar kommunal samhällsplanering, med fokus på handelsetableringar. Uppsatsen tar avstamp i den utveckling med externalisering och koncentration av detaljhandeln som pågått under de senaste decennierna. Denna utveckling är såväl lokal som regional och har inneburit att detaljhandeln koncentrerats till centralorternas stadskärnor och externa stormarknader. Syftet med uppsatsen är att undersöka vilken aktör som bestämmer över denna utveckling. De aktörer som undersöks är dagligvaruhandeln och samt kommuner.
Svensk mission i Eritrea : med fokus på inter-religiösa relationer
Mitt syfte med detta arbete är att få en bild av hur relationerna mellan olika religiösa samfund såg ut under en tid då EFS byggde upp och etablerade sin verksamhet i Eritrea. För att få ett lokalt signum på uppsatsen kommer den till stor del att handla om en lokal missionär, Olle Hagner från Ovansjö socken, som kom att tillbringa närmare 40 år som missionär i östra Afrika ? många av dessa med sin fru som följeslagare.Följande frågeställningar har fungerat som utgångspunkt:* Varför missionerade EFS i just Eritrea?* Vad åstadkom Olle Hagner?* Är det möjligt att se en förändring över tid på hur missionärerna såg på den inhemska religionen på plats?* Hur gestaltade sig de inter- och intrareligiösa relationerna mellan EFS-missionärer (särskilt Hagner), muslimer, kopter, katoliker och anhängare av den inhemska religionen?* Vilka tänkbara orsaker ligger bakom eventuella förändringar i attityder och relationer?Kritiken från Hagner och EFS mot andra samfund var bitvis hård, och då framförallt mot den katolska kyrkan. Detta är inte förvånande då den katolska kyrkan gjorde allt för att tränga ut EFS? missionärer ur Eritrea och lyckades också med detta under en period.Olle Hagner anlände till Eritrea första gången 1923 efter att ha lovat att ta vid efter sin broder Johans tidigare missionsgärning i Eritrea som han tvingats avbryta på grund av sjukdom.
Miljödiplomering av HV71
This report is a degree paper made for the Engineering program in Technical Chemistry at the School of Engineering, Jönköping University.The intention of the project which is described, is to answer whether HV71 might become environmentally certified according to the criteria of "miljödiplomering". The project also included an investigation of which further steps and measures must be undertaken by the enterprise in order to achieve the certificate. The final part was to implement the necessary requirements for the certification.The report starts with a short background where the origin and function of environmental management is briefly explained.The report continues with how the practical work with the environmental certification was done according to requirements of Jönköping municipality. Motivations behind each part of the process are given as well as explanations of how each part of the process was carried out.The final result of the project was that HV71 took the measures needed to live up to the required demands. After a revision made by Miljöstrategen i Jönköping AB, HV71 passed the demands and became thereby an environmentally certified business..
Del projekt inom ClampCal - Utvärdering av mätmetoder för temperatur, viskositet och densitet samt röregenskaper
The dissertation were performed on SP, Technical Institute of Sweden.
The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal.
One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow.
Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible.
The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics.
For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.
Konstruktion och design av arbetsplats - för kablagemontör
This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.
SFEH. The clothes. The brand. The style.
SFEHA project about a clothing brand and a new kind of showroom that looses it´s structure during the process.But managed to find the core and produced a personal mirror of prints for a greater cause.Sfeh is the brand with quality and humor in focus and the will to push the boundries. With prints based on free drawing and smart thinking as it´s essential base.The project resulted with a various collection with mostly T-shirts but also textile gloves and bed sheets..
Integration på arbetsmarknaden : Ett sysselsättningsprojekt om arbetsmarknadsproblematik för invandrare
Integration of the labor is becoming increasingly topical, with increasing immigration. Labour market integration has been proved to be problematic, partly due to linguistic and cultural differences between the migrant's home country and Sweden. Difficulties with labour market integration have resulted in high numbers of unemployment and dependence on social welfare. Projects VIAM is an employment project conducted by Folkhälsobyrån AB in Västerås, aimed at finding jobs for welfare dependency immigrants. The purpose of this study is to investigate how the informants on Folkhälsobyrån and administrators on the Social service in Västerås has experienced the work of the project VIAM, development issues and the informant´s and administrator´s perception of factors that are influencing immigrant´s employment situation in Västerås.
Fallstudie: en analys av Kungens Kurva utifrån Huddinge kommuns vision för vidare utveckling av området
In this thesis, a case study of Kungens Kurva in Stockholm is made. The municipality of Huddinge has designated the area, which is an external shopping-center, as one of its key development areas in the future. The municipality has established a future vision for the area, which extends until 2030. The vision claims, inter alia, that Kungens Kurva along with Skärholmen will become a vibrant suburb. How well the values and aims of the vision are met in the current area situation is discussed in the case study by a number of analysis that carries out the existing structures and characters of the area.
Objektspecifik möbeltextil
My project aims to understand more about the methods used in making woven textiles on an industrial level, and how these tech¬niques can be adapted to create object-specific pieces. On visiting the furniture fair in Stockholm, I was surprised to see that most of the textiles used for furniture were so similar, despite the variation in the furniture itself. My project is about creating textile patterns that are specific for each piece.The idea behind the process could be used for any product, but the pattern I created is specifically for the armchair Accent by Yngve Ekström. I wanted to create the feeling of a pattern moving over the surface of the object and adjusting to it. I worked primarily with differences in density.
Arkivens dag : En bildande erfarenhet eller marknadsföring?
Archives Day is celebrated in Sweden on the second Saturday of November every year since 1998. The aim of this study is to examine how and why Archives Day is celebrated at five archives in the Stockholm region.My empirical material consists mainly of semi-structured interviews with archivists at five archival institutions in the Stockholm region. I have chosen to only interview archivists and not any visitors due to the time con-straints and the scope of the thesis. I have also examined how the goals stated in a government report are carried out in the work with Archives Day.The theoretical framework of the investigation is gathered from educational theory as well as archival theo-ry. For the educational approach I have used John Dewey?s theory of what makes an experience educational to examine whether Archives Day is an educational experience or not.