This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

Modern IT systems tend to become more and more complex, while the number of active systems in companies increases. Furthermore, the number of security-related incidents is at an all-time high. These new conditions impose new demands on organizations. For example, it is no longer possible to manually collect and examine the systems log messages.The purpose of this thesis has been to make a comprehensive study of solutions for automated collecting and managing of log messages, analyze the Swedish Armed Forces specification for solutions for central log collection and management, and evaluating exis- ting solutions. The work consisted primarily of literature studies and evaluations of two of the Swedish Armed Forces of selected products: NetIQ Security Manager and Splunk.

In view of the difficulty of recruiting staff to care profession and in terms of the increasing need to find ways of ensuring a good language level in the profession, have an interest in language tests been revealed. The purpose of this paper is therefore to highlight the use of language tests for admission to the care courses for adults in Värmland. What provided This is a survey of the prevalence and an examination of the validity of the test. The issue that this study assumed is: How is language test in connection with admission to the certified health and social care courses for adults in Värmland? How well correlates intent of the use of the language test with the test's validity and reliability?The methods used to seek answers to these questions has been a combination of questionnaires and experiments.

The purpose of this thesis is to investigate the new real estate brokerage Act and to see whether the main intent, to strengthen the consumer protection, has been fulfilled through the implementation of the 2011 Act. The real estate agent legislation is made to protect both the buyer and seller throughout the property transaction. Although the intent is to protect the consumer, it is not unusual that disputes arises. To avoid disputes concerning the property transaction, the 2011 legislation opens up for greater transparency in the mediation process. The protection for the consumer has been considerably stronger since the 2011 legislation was implemented.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

The report is the result of a master thesis at ENEA AB during the fall of 2009. Itaims to create a specification of flash memory management system which focuseson power efficiency and low RAM usage for embedded systems, and to design andimplement a prototype of such a system to facilitate further development toward thecreated specification. The system used by ENEA today is a Flash Translation Layer(FTL). It has a complex structure which prohibits modifications and customization,therefore a new flash memory management system needs to be developed.The suggested solution uses a translation layer called Metadata FTL (MFTL), wherefile system metadata and userdata are separated from each other in order to improveperformance. The partition holding userdata uses a block-level mapped translationlayer system called Fully Associative Sector Translation FTL.

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.

This thesis presents the design and implementation of an accounting and status notification system for the LPRng print spooler. A solution using SNMP to query for needed accounting and status data is presented, a design built upon this, and an implementation produced. As the system derives from the requirements specification, it will make no attempt to solve all printer accounting problems or to offer compatibility with all printers, database management systems or print spoolers. However, several solutions for printer accounting are discussed and the best solution derived from the requirements specification will be chosen..

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

The technological development and increasing popularity for integrated multichannel solutions constitutes both severe opportunities and challenges for todays' and tomorrows' retailers. On the account of consumers leaving traces when using digital channels and the technological development enabling retailers to use this information to create relevant offers, goal-congruity is relevant to apply in the multichannel shopping context. Based upon previous research on goal congruity and channel integration, our main purpose in this study is to increase the understanding for how congruity in an offer increases the intention to redeem the offer. Several studies focus on and contrast the product characteristics hedonic and utilitarian. However, it has been stated that it is crucial that research also examines the difference in target audience, buying situation and as examined in this study: buying decision process.

This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.