The purpose of this study was to examine and evaluate an assembly station at Kalmar Industries in respect to ergonomics. The study was to result in an improved assembly station with lower risk of work- related injuries. It was the study group?s expectation that the measures taken at the assembly station can function as guidance and an inspiration for other ergonomic improvements at the company. Several goals related to the purpose were established as guidance for the study.The mechanic?s work situation was mapped through a series of methods.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

ASSA develops locks and integrated security systems for doors. ASSA is Sweden?s leadingsupplier of locks and security systems. ASSA AB worked during the master thesis withimplementing a common development process for all companies within the group. Ideageneration was one relative unexplored area for the group and the interest of finding effectivemethods was required, the company understood what an effective handling of ideas couldcontribute in the pursuit of more and pleased customers.The purpose of the master thesis has been to study and to map which methods are used inorder to carry out idea generation.

As the Swedish governments long term goals include a reduction of fossil fuel dependency, increasing pressure is placed upon energy companies to create and develop new solutions for renewable energy. The following case study was done in collaboration with the company Sydved Energileveranser AB and one of their contractors, Enarssons Skogsentreprenad AB. The objective of the study is to examine the bioenergy situation in region of Skåne and evaluate the potential solutions in the region for a forest-fuel assortment, based on a bioenergy-cutting-system. As a part of this study I have compared ordinary manual cuttings done with a chain saw and cuttings made using the new ?bio- energy cutting system?. The cuttings made under both systems were tested in areas near agricultural fields or pasture land in order to maintain an open landscape.

The aim of my examination work was to compare and research how russian respective swedish teachers make use of educational aesthetic methods such as drawing, drama, music and dance in the teaching of core school subjects ? mathematics and swedish respective russian languages. The aim of this work was to find out which of these methods are used by pedagogues in the process of education and on what level are they integrated into the theoretical pedagogic work. The point was to also analyse the regulation documents used as pedagogical base in schools i've been doing my survey in. This was done to partly find out what arts perspective is given in the curriculum and partly to see what pieces of it are reflected in the process of education.

BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

Abstract Integrated mental training is a method that entails a systematic and long-term training of mental processes (thoughts, images, emotions) that aims to enhance performance as well as gratify feelings and improve thought processes. This training develops an alternative system of control by using substitute state of consciousness and self-hypnosis. The method is concerned with both mindfulness and performance approaches, which is crucial in order to feel and function better. The intent of this study is to highlight the experience of the different steps of integrated mental training to gain an understanding of how, where, and when changes occur. To achieve the objective of this study, a qualitative empirical method was used.

 Date                   May 28, 2009Level                  Bachelor thesis in Business Administration/Information TechnologyAuthors             Jennie Andersson, Niklas Fridell, Visar HoxhaTutor                  Marie MörndalDepartment    HSTTitle                    ERP-solutions in small to medium sized enterprises ? possibilities and problemsSummary          ERP-solutions have penetrated the market for SME: s, offering the same advantages larger enterprises have enjoyed for years. For a significantly cheaper price, SME: s can nowadays acquire ERP-solutions and become more effective and increase their profit.  The authors have examined five SME: s in both the production and service company segment and have come to the conclusion that an ERP-solution would indeed benefit these companies in many levels but also induce certain obstacles the examined companies must overcome, both financial and organizational.Purpose            The purpose of this thesis is to examine if and how SME: s can become more efficient and developed and increase their profit by implementing an ERP-solution. Further, the purpose is to discuss which conditions that exists for the examined SME: s in order to implement an ERP-solution.Method            The thesis consists of a qualitative research where the authors have interviewed either the owner or employees at management level by using semi-structured interviews.

A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

This thesis on the sustainable urban development has the intent to discuss the conservator?s position in alteration of the built environment. An essential component of the thesis consists of a case study in the form of an entry in an open architectural competition for the development of Furuset, an urban residential area in Norway. The thesis? discussion is based on two approaches to change and socio-economic transformations, considered being dominant within the heritage theory and practice: the production of ideas and great narratives and conservation as an instrumental tool.

Abstract Integrated mental training is a method that entails a systematic and long-term training of mental processes (thoughts, images, emotions) that aims to enhance performance as well as gratify feelings and improve thought processes. This training develops an alternative system of control by using substitute state of consciousness and self-hypnosis. The method is concerned with both mindfulness and performance approaches, which is crucial in order to feel and function better. The intent of this study is to highlight the experience of the different steps of integrated mental training to gain an understanding of how, where, and when changes occur. To achieve the objective of this study, a qualitative empirical method was used.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The basic principle of the integrated school according to the Salamanca Declaration is that all children, whenever possible, should be taught together, regardless of any difficulties or diversity. It has been shown that students with neuropsychiatric disorders are having much more difficulties to achieve the targets than the average student. Pupils with neuropsychiatric syndrome will always be present in school and we who are working in the business must be better at learning to adapt to them so that they too can achieve proficiency in school.Mathematics is perhaps the topic that Swedish students generally have most problems with,and it will not obviously be easier if you have some form of neuropsychiatric disability.In our future role as special education teachers, we will mentor and support other teachers in the complex educational environment that exists today. The aim that has been built up is thus partly to explore how mathematics teachers work with included students with neuropsychiatric disorders, as well as how teachers wishing to become supervised by specialeducation teachers in mathematics. The study is conducted from a sociocultural perspective.A sociocultural perspective on learning means that all people are learning all the time in social settings.

This thesis describes a further development of an existing prototype named Automatic pin bone remover. The further development was requested from the Swedish consulting firm ATM AB. The request of automatic pin bone removers is high and has the potential to be a worldwide leading product.The goal with the thesis work is to further develop an existing prototype. In order to achieve the goal a pre-study of the prototype had to be made in order to define a customer demand specification. The thesis work is then continued by a function analysis which differs from a conservative one.