THE CONSTANT IMPROVAL AND REFINEMENT OF THE MOBILE TECHNOLOGY HAVE MADE IT POSSIBLEto use video in settings where such use couldn't be motivated before, due to economicaland practical reasons. The purpose of the study was to identify and explore possiblechallenges in interorganizational use of video during emergency response work. Thiswas done by a case study of a system designed for the use of video in such situations.The study focused on operational challenges for the fire and rescue services and thehealthcare organisations, where the main challenges identified were intended to beanalysed and discussed in terms of design. The empirical results were gathered throughqualitative interviews with representatives from the fire and rescue services and thehealthcare organisations in Göteborg. This material made it clear that contextual aspectsof emergency response work lead to a couple of challenges connected to the use of videoin such situations.

The thesis aims to be an informative study for landscape architects and hopes to contributeto an understanding of ways water can be used and managed at sites lacking open, greensurfaces.The title "intelligent water design" should evoke the reader?s thoughts concerning intelligentaspects of water. Text, images and the design proposition give hints about these aspects.In the first part of this thesis, various examples of water design are presented. The chosenexamples are all applicable in urban environments with a high percentage of impervioussurfaces.The second part examines Gjutarplan, an urban square in the centre of Kallhäll, in Järfälla,north of Stockholm. Gjutarplan is first framed in a geographical and historical context.

The deregulation during the last decade within the airline businesses have called upon a more fierce competition among airlines. This fact forces airlines to continuously focus on service development in order to offer attractive solutions to satisfy customers changing needs and stay competitive. This paper focuses on service development at Scandinavian Airlines. The aim of this case study is to examine the sources of information used in service development and new service development at Scandinavian Airlines. Further the aim is to examine whether information derived from customers can be shown to play a more important role in either service development or new service development.

Varje dag interagerar samhället med nya produkter och system som måste varaanvändbara och därför är användbarhet är ett viktigt begrepp i detta sammanhang. Föratt enklare integrera användbarhet i utvecklingsprocesserna för dessa produkter ochsystem, används ISO-standarden för användarcentrerad design.Syftet med denna studie är att undersöka huruvida Monitor ERP System AB bedrevanvändarcentrerad design i utvecklingsprocessen av deras mobila applikation - MonitorMobile. Som hjälp i denna utredning används ISO-standarden för användbarhet ochanvändarcentrerad design. För att besvara problemformuleringen, har jag genomfört enretrospektiv studie och intervjuer med beställare och utvecklare. För att sluta sammanutredningen har jag också skickat ut en enkät till användarna.Resultatet visar att Monitor är villig att arbeta nära användarna, men de introducerardem inte i processen.

The data acquisition system COMET developed by Saab AB contains a unit for signal conditioning and A/D conversion, called KSM. The varieties in signal conditioning constitutes of a number of specific PBAs and maintenance as well as reconfiguration of these are complicated not to mention costly. This thesis has aimed to investigating whether the signal conditioning circuits can be replaced by a general purpose, programmable solution. If so, how can this be done? The development has been carried out by evaluating ideas through the use of a laboratory environment and has resulted in an analog design for laboratory purpose.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

no abstract available.

Denna rapport omfattar ett examensarbete på 22,5 poäng. Examensarbetet har utförts inom ämnet integrerad produktutveckling vid Högskolan i Skövde tillsammans med Jai Designpartner AB. Målet med arbetet var att utveckla ett fällbord som enkelt kan fällas ihop, ha en längre livslängd och lägre vikt än företagets tidigare fällbord. Samarbetet genererade ett fällbord som inte följer de generella principerna av infällning av bordsben. Resultatet blev ett fällbord med minimal klämrisk, med en längre livslängd då infällning av bordsbenet sker med en vridning och med en mindre vikt då ramverk kan elimineras..

To support uniform and fair assessment of Swedish students? English language competences, mandatory National tests are provided both for secondary and upper secondary education. The current thesis may be seen as a contribution to the further development and validation of these tests, with regard to the likely introduction of computerized testing methods. The aim is to gain further knowledge from current research in the field, to study and elucidate international experiences of implementation, and to gather and analyze feedback from students and teachers. Based on my findings, some tentative conclusions will be drawn, and recommendations made concerning future developments.

Följande projektarbetet har resulterat i en ny webbplats åt verkstadsföretaget Löfman & Co Verkstad AB,resultatet är sprunget ur WordPress och projektet vilar på en teoretiskt grund av läsbarhetsteori samtbeprövad erfarenhet kring ämnet responsiv design. Projektrapporten innehåller både information gällandedet teoretiska ramverket samt de slutgiltiga tekniska lösningarna som implementerades på webbplatsen.Två kvalitativa undersökningar på företagets gamla webbplats har bidraget med ytterligare underlag förskapandet utav företagets nya webbplats.. Utöver det ha en viktig del i utvecklingen gjorts av den ständigakontakten med kunden. Projektresultatet är ett bevis för att det finns en arbetsmarknadsmässig funktionför de studenter som läst Visuell Kommunikation och Design vid Karlstad Universitet..

e-Me projektet är ett innovativt forskningsprojekt där tillvägagångssättet co-design använts för att framställa en elektronisk assistent. e-Me realiserades i januari 2007 som ett pilotprojekt vid Högskolan i Borås. Den elektroniska assistenten är en artefakt som ska förenkla det administrativa och elektroniska livet för studenter. Målet med den här uppsatsen var att öka förståelsen kring co-designs grundidé, praktiska moment samt de kritiska roller som kan urskiljas i co-designprojekt. Studien är av intresse för alla som vill utvidga sin kunskapsbas inom både co-design samt e-Me.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

Active headsets have been on the market for years and now it is time for something else to enter the stage. The technology of active noise reduction can for exmple also be used in ventilation systems for reducing ventilation noise. An active control system principally consists of four important components, namely the downstream error microphone, the upstream detection or reference microphone, the digital signal processor (DSP) and a loudspeaker. The upstream reference microphone listen to the primary ventilation noise and sends it to the DSP which makes a phase shift to the signal and sends it to the loudspeaker. The loudspeaker sends out the opposite waveform of the incoming one and reduce the primary ventilation noise.

This project in an in depth exploration about the basics of creating space in the form of an experimental investigation using my own perceptions as reference. Within a method, especially outlined for the project using descriptive words of opposites, my interpretation of the words has been formed into models of rooms. Four workshops with restrictions and rules acted as a platform for the striving towards the aim of a wider understanding of how space can be experienced. Through analysis I have formulated the different parameters influencing space itself and my perceptions of it. During the project a language for visualizing the interpretations of a room has been further evolved.