This study was made as a part of a feasibility study on a polishing wetland at Rimbo wastewater plant (wwp) in Norrtälje municipality. The wwp had to decrease the nitrogen discharge to reach the limit 15 mg tot-N/l. The nitrogen in the outlet was mainly in the form of nitrate, hence the wetland mainly ought to support denitrification. The proposed area for the wetland was situated right next to the wwp and was already in the municipalitys posession. One aim of this study was to examine what spieces of plants needed to achieve highest possible denitrification.

Because of the increasing trends in energy consumption and increased environmental awareness, greater focus has been placed on improvement and development of renewable energy sources. An already proven and accepted method is biogas production from anaerobic digestion at municipal wastewater treatment plants.In the waste water treatment process solid material and dissolved pollutants are separated from the water, forming a sludge. The sludge is separated from the process and stabilized during anaerobic digestion or aerobic aeration. Most often, mesophilic anaerobic digestion is used. Because of degradation by microorganisms, biogas with a high content of methane is formed during the digestion.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

Abandoned and unused railway structures often possess great potential if they are reclaimed and reused for new purposes. The thesis focuses on the global trend of restoring and revitalizing these areas, converting them into park areas, rail trails and green corridors in the city landscape, while preserving their ecological, social, esthetic and historic values. These rail areas were often abandoned when industries moved out from the cities, either to industrial areas or abroad. The use of railways for transporting industrial goods was also replaced to a large extent my motorized road vehicles in the mid 20th century, leaving the rails under-utilized. Because of their location and intrinsic values, they can be reused for important functions, such as green areas in the city environment, providing space for recreational activities and exercise and social meetings and interactions. I have closely investigated the three park areas High Line in New York, Promenade Plantée in Paris and Schöneberger Südgelände in Berlin, which have all gone through this transformation in recent years. I have summarized my conclusions in three key concepts to consider: design for social values, preserve the architectural history, and leave room for future evolution. The final part of my work is a design program for an abandoned railways area in Stockholm: Eriksdal railway area.

Effects of climate change, urbanization and global homogenization are resulted in the degradation of land and losses of natural habitats. Ecological design integrates nature into urban environment by respecting natural ecological principles and processes and creating resilient urban biotopes which also can be used by local urban communities. The aim of the thesis is to answer the research questions: How ecological design principles can be applied for re-design of Toledo Riverfront (with requirements of the design competition)? and What is the ecological design in landscape architecture? I participated in the USA design competition with the aim to create a vision and redesign of Toledo Riverfront in Ohio State, USA. The site is located in the south point of Lake Erie. As a result of a long industrial activity, riverfront of Toledo had been transformed into inaccessible and abandoned brownfields. In my proposal I applied ecological design principles on three scales: the city of Toledo by reinforcing of ecological connection and creating green corridors along the river; the intermediate scale by suggesting public parks along the river front and on the fine level by proposing detailed design including remediation of the site and use of dredged material.

The primary focus of this Master thesis is to study how industrial house building can be implemented during production of rental flats under the terms of public procurement. In order to determine a suitable working process as well as presenting a possible architectonic result of the process, a case study is carried through.A housing projekt is designed on a site i Malmö, where the commisioner is MKB Fastighets AB and the contractor is NCC Komponent with the industrial building system NCC Komplett. The focus of the design is to accomplish high quality apartments to a resonable price, as well as solving the overall scheme for the site.The housing projekt, Kv. Flaggskepparen, built on the consept of a single house model, used to handle the entire site, shows that the building system is well suited to accomodate the commisioners demands.In order to reach the best possible architectonic result with the building system, cooperation initiatded in an early stage of the process is neccesary.A model is proposed to handle the situation under the terms of public procurement. The model suggest that the geometrical design is mainly carried out after inquiry and that architectonic qualities should mainly be defined in a non geometrial way for inquiry..

This cross-sectional study investigated the use of health benefits in relation to the self-rated health of employees at two medium-sized industrial enterprises in Hälsingland. The method used to investigate this was through a self-designed questionnaire consisting 19 questions about health, lifestyle and health benefits at the workplace. A total of 100 questionnaires were distributed in the two companies, hence 50 surveys at each workplace. The response rate was measured to 88 % and 74 %, which means a loss of 6 persons and 13 persons. The results showed that Company nr 1 offers its employees a health benefits consisting of free access to gym in the company premises after working hours and financial contributions to training-cards.

A group of companies that only recently has caught the attention of Swedish designers, enterprises and media are the so -called "furniture pirates". In Sweden it?s mainly two companies that have ended up in the spotlight. The online stores Ikon M and Designers Revolt are two companies which currently sell replicas of famous Swedish and foreign designers. Although the designs sold are copyright protected in Sweden, and most other European countries, the right holders can only stand by and watch as more or less exact copies are sold for a fraction of the price of the originals.The business model - to exploit the EU?s free movement of goods and the UK's short term of copyright protection in matter of mass-produced art (industrial design) - has proven successful for the companies that practice it.

Purpose: The purpose with this study is to clarify what importance a co-occurrence event can have on a smaller town, and also what positive and negative consequences it can have on the town seen from a social, economic and political aspect. I will also look at what magnitude the festival have on the local commercial and industrial life and how it affects those who live there. I will also determent how the moving of the festival might come and affect the local businesses, the local population and the community it-self.Method: I will thorough-out this study work with qualitative research methodology. I will there-for process the empirical data that will be collected and used for this study from a qualitative research methodology point of view. I will likewise go through with two deep-going interviews with people well familiar with the subject to increase and strengthen the validity of my study.

Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

Abstract Title: Enabling Smart Research and Development through Knowledge Conversation Seminar date: 2005-06-08 Course: Master thesis in business administration, 10 Swedish credits (15 ECTS) Authors: Andreas Johnsson, Johan Rosendahl Advisors: Lars Bengtsson Key words: Knowledge management, Knowledge conversation, Research and development, Ba, Trelleborg Purpose: The purpose of the thesis is to create a model that shows how knowledge management aimed at research and development processes can be used and how the theoretical fields can be connected. Methodology: The thesis is based on abductive perspective where empirical and theoretical material has been mixed to create a foundation for the analysis. Theoretical perspectives: Theories concerning knowledge management and research and development have primarily been used. These have been complemented with material about team structures and incentive systems. Empirical foundation: The empirical material is based on semi structured, mostly qualitative interviews and strictly quantitative inquiries performed at Industrial Hose within the Trelleborg group.

Denna undersökning är resultatet av en kandidatuppsats skriven vid handelshögskolan, Umeå universitet på uppdrag av Scania Industrial Control vid Scania CV AB i Södertälje. Scania arbetar efter ett produktionssystem (SPS) som har grunden i Toyota Production System (TPS) och tar formen av ett hus där Scanias värderingar, principer och prioriteringar framgår. Scanias framgång anses bygga på att nyttja personalens kompetens inom förbättringsgrupper, ett arbete som sker genom SPS. Historiskt sett har SPS tydligast återfunnits inom Scanias produktionsavdelningar, emellertid har arbetssättet börjat överföras i alla Scanias verksamheter för att genomsyra hela företaget. Scania ser i dagsläget över sina verksamheter för att nå långsiktiga effektiviseringar med målet att öka sin framtida konkurrenskraft.

In a sequence described in the next paragraphs, I remove the poorly insulated roof of Gustavsberg Porcelain Factory and make new use of its  foundation. The monolith cement slab, once supporting heavy industrial machinery, is now the site of lakes and other movements:The top floor area is split, and a new built volume, one story higher, overtakes the southern half resting on the factory?s basement, digging into it at its western and eastern ends. Striking horizontally, the fissure exposes a long central axis, taking advantage of the factory?s horizontality to articulate vastness .

Examensarbetet sammanfattar de mekanismer som binder kapital i den speciella miljö som råder i företagets gasturbintillverkning. De pågående verksamhetsutvecklande åtgärderna recenseras ur ett kapitalbindningsperspektiv och rekommendationer inför det fortsatta kapitalbindningsarbetet hos företaget presenteras. Rapporten visar även hur gängse mätmetoder och nyckeltal behöver anpassas för de långa ledtiderna och den höga grad av kundanpassning som företagets produkter kännetecknas av..

Abstract The overall aim of this paper is to examine the impact of ideologies and norms on a legal system. Against a background of a description of the hierarchy of norms in Swedish labour law and in European Union law, respectively, the paper aims to specifically demonstrate the problems caused by the different hierarchies of norms when implementing EU directives in Swedish labor law. The research question examines how the trade unions? right to industrial action towards an undertaker providing transnational services by posting of workers, is affected by the implementation of the Directive 96/71/EC of the European Parliament and of the Council of 16 December 1996 concerning the posting of workers in the framework of the provision of services. The paper answers the question under what conditions the Swedish trade unions have the right to take industrial action in situations of posting of workers. Through the study of sources of law and adhering to traditional jurisprudence, this paper investigates the legislation regarding trade unions? rights to take industrial action in situations of posting of workers. In addition to the jurisprudential research, a glance at the history of ideologies is provided.