This paper aims to describe the geographical changes of Swedish international aid politics since 2007, which was the year the new aid reform of decreasing collaborating countries, came up. To decrease the number of aid receiving countries due to efficiency is not a new idea within Swedish aid politics, but Sweden received criticism from the (DAC) Development Assistance Committee, saying Sweden was active in too many countries, and the government established a policy to decrease the amount of countries given aid. Despite the government?s recent work, science has shown on a failed country focusing. This is followed up in the paper trough examination of statistics to measure the extent of the reduction.

Fortifikationsverket which is the landlord for the Swedish national defence has a great problem in their forestry due to the relatively large amount of metal objects in their timber. These metal objects cause different types of economical losses in the timber refinement chain. To enable out sorting of logs containing metal objects already in the harvesting phase, Fortifikationsverket is interested of the possibility to utilize some type of metal detector in a harvesting head for that purpose.The goal of this study was to, with help of a case study, enlighten the problem that metal objects in timber cause for Fortifikationsverket and their customers of timber and to investigate conditions of to mount and utilize some kind of metal detector in a harvesting head at present.The saw timber deliveries by Fortifikationsverket during the time period 2003-2005 was used as a reference volume for calculations of economical losses. In this case study was included two sawmills where timber from Fortifikationsverket were delivered to for further refinement. Factors investigated were the type of damage metal objects caused in these two sawmills and the economical signification of these damages.

There are today large amounts of contaminated sediments in the Baltic Sea. These contaminants are the result of many years industrial activity where the contaminants have not been taken care of and just released out in the water. When ports want to dredge in their fairways and harbor areas the contaminated sediments need to be considered since they are a environmental risk. The development in this area has been slow and new techniques have just recently made its way into dredging operations in the Baltic Sea region. As a result of this there are no clear methods for implementing new techniques today.

Abstract Title: PR consultants and bloggers; a win-win situation? -  A study of PR consultants? new adaptations in the labour market due to the emergence of fashion bloggers. Authors: Cecilia Girell, Sandra Kjellstro?m Tutor: Ylva Ekstro?mPurpose: With the expansion of the Internet, fashion bloggers have gotten more power. A few companies have understood this powerful and reasonable cheap marketing channel. Despite this, most companies still feel powerless, but what has happened to the work of PR consultants in this constant changing media environment? The ones whos purpose is to act as intermediaries between companies and various media channels.

Sudan has always showed great potential in the poultry industry, but it has not been until now that this potential has blossomed and is growing quickly. As large agribusinesses1are taking over the market shares within the urban areas, smallholders2 have been put out of business. They are not able to compete with mass production and lack financial assets to improve their production techniques. Contract farming is defined as initiatives from agro industrial companies to secure access to smallholder produce and has in developing countries become a way of allowing the poor to participate in a larger market (Farrington, 1999). The aim with this study was to investigate the suitability of implementing the contract farming concept within the poultry industry in Sudan today. The study is a qualitative field study and the authors have conducted qualitative interviews with respondents involved in the poultry industry in Sudan.

The present study examined high school students? attitudes to higher education at university/college and their study engagement in an industrial town in klarälvdalen in the county of Värmland. The main research question was whether there are any differences between students in vocational and theoretically oriented programs regarding their attitude to higher education and study engagement. The results was also compared with a study with the same research question conducted in Countryside town in fryksdalen, Värmland county to see whether attitude and student engagement differ between high school students in different parts of Värmland. The method used was quantitative with data collected by using questionnaires.

This account deals with my degree in furniture design. The project was done in collaboration with the architect firm Byggnadskonst AB in a quest for the cafe chain "Vivels"Byggnadskonst AB?s mission was to make the interior of the cafe that Vivels is building in Larsberg Center on Lidingö. My assignment was to design chairs for the café. In the beginning I had even thought about designing a table, but as time past I focussed more and more on the chairs.

On commission of the County administrative board in Värmland County a method was developed for analysis of the occurrence of artificial land use at lakes and watercourses. With artificial land use is meant land significantly affected by man. Two bases have been used to carry out the analysis. In one of the analysis the vegetation database and in the other GSD¹-Marktäckedata (land cover data) was used (this method has been used by County administrative board in Jönköping County).The analysis comprises all watercourses within Alsterälven river basin. The digital water bodies are created by the Swedish Meteorological and Hydrological Institute on the basis of GSD-Översiktskartan (general map).

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

In today´s forestry, assessments of needs for thinning are based on basal area measurements. This is an indirect measurement. The approach and the developed assessment tables are based on an assumed production forest, which implies that management proposals in stands that deviate from the basic model may be misleading. Since Walter Bitterlich in 1948 launched the idea of the relascope, several modifications have been developed for different purposes. In common is that all are based on a certain angle measurement principle.

Aim/Objective: The purpose of this paper is to investigate and analyze the early effects that could arise between entrepreneurs and lenders in connection with the auditing requirement, which has now been abolished. Through, empirical data identify the impact from the credit provider?s perspective and small business perspective and then make an overall assessment.Method:The authors are to achieve the purpose for this thesis through the use of both primary and secondary data. Primary data gathered through interviews and secondary data in the form of earlier thesis as well as articles.Result and conclusion: Banks have not prepared for the change in connection with the abolition of the audit requirement. Lenders look at repayment ability as the most important aspect of giving credit.

Title: To make a living by library music; Opportunities and prerequisites. The purpose of this essay is to investigate how a music producer or composer can achieve placement of his or her music in commercials, TV-shows, computer games, and other media. What is required to make a living by composing and producing music today? This is a qualitative study made by interviewing six persons, who all in some way work with this kind of music. The result shows that in order to reach out and place the music, an active net working, a deep knowledge in music production, in a wide range of music genres, is crucial.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

Words like pirates and anti-pirates are becoming common features in the cultural political debate of today, and the file-sharing phenomenon has become a more and more delicate and disputed subject. The fact that people are organizing in networks to swap computerfiles with each other has, among other things, led film and music companies from all over the world to initiate a number of anti-piracy organizations, assigned to protect the right to culture and information. The industrial organization Antipiratbyrån (the Anti-pirate Bureau) and the network Piratbyrån (the Pirate Bureau) have on several occasions been used to represent the prevailing conflict in Sweden. The purpose of this study is to apply a sociological perspective to the collective act of file sharing. Additionally, the purpose is to argue that the activity can be understood as a social movement, although it is rarely referred to as such.